On the limits of CO2 capture capacity of carbons
Open accessThe DOI matches its Crossref record.
Abstract
This study shows that standard techniques used for carbons characterization, such as physical adsorption of CO2 at 273 K and N2 at 77 K, can be used to assess, with a good accuracy, the maximum capacity of carbons to capture CO2 under post- and pre-combustion conditions. The analysis of the corresponding adsorption isotherms, within the general theoretical framework of Dubinin's theory, leads to the values of the micropore volume, Wo, and the characteristic energy, Eo, of the carbons, which provide direct information on the equilibrium CO2 uptake of the carbons at different pressures and temperatures. Although in special cases slightly higher values can be obtained, an overall assessment of the textural parameters for a large variety of activated carbons, indicates that a CO2 uptake upper-bound around 10–11 wt% seems to be realistic for standard activated carbons under post-combustion conditions. In the case of pre-combustion conditions, this limit would not exceed 60–70 wt%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Ben-Mansour, R., Habib, M. A., Bamidele, O. E., Basha, M., Qasem, N. A. A., Peedikakkal, A., Laoui, T., & Ali, M. (2016) · Applied Energy · doi:10.1016/j.apenergy.2015.10.011 · Cited by 722
Wei, H., Deng, S., Hu, B., Chen, Z., Wang, B., Huang, J., & Yu, G. (2012) · ChemSusChem · doi:10.1002/cssc.201200570 · Cited by 421
Hypercrosslinked organic polymer networks as potential adsorbents for pre-combustion CO2 capture
Martín, C. F., Stöckel, E., Clowes, R., Adams, D. J., Cooper, A. I., Pis, J. J., Rubiera, F., & Pevida, C. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03534c · Cited by 334
Self-citationNanosize Zr-metal organic framework (UiO-66) for hydrogen and carbon dioxide storage
Abid, H. R., Tian, H., Ang, H.-M., Tade, M. O., Buckley, C. E., & Wang, S. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.01.104 · Cited by 316
Valorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
“This is highly desirable, as the micropore volume is intrinsically related to the CO2 adsorption capacity at atmospheric pressure [45].”
BackgroundSelf-citationCO2 capture and storage: A way forward for sustainable environment
Anwar, M. N., Fayyaz, A., Sohail, N. F., Khokhar, M. F., Baqar, M., Khan, W. D., Rasool, K., Rehan, M., & Nizami, A. S. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.08.009 · Cited by 285
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
Self-citationAshourirad, B., Sekizkardes, A. K., Altarawneh, S., & El-Kaderi, H. M. (2015) · Chemistry of Materials · doi:10.1021/cm504435m · Cited by 245
Isotherms and thermodynamics of CO2 adsorption on a novel carbon-magnetite composite sorbent
Raganati, F., Alfe, M., Gargiulo, V., Chirone, R., & Ammendola, P. (2018) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2018.04.037 · Cited by 215
CO2 Capture in Different Carbon Materials
Jiménez, V., Ramírez-Lucas, A., Díaz, J. A., Sánchez, P., & Romero, A. (2012) · Environmental Science & Technology · doi:10.1021/es2046553 · Cited by 158
Development trends in porous adsorbents for carbon capture
Sreenivasulu, B., Sreedhar, I., Suresh, P., & Raghavan, K. V. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03149 · Cited by 127
Dobele, G., Dizhbite, T., Gil, M. V., Volperts, A., & Centeno, T. A. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2012.09.010 · Cited by 95
Self-citationCO2 capture over steam and KOH activated biochar: effect of relative humidity
Zhang, C., Sun, S., Xu, S., & Wu, C. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106608 · Cited by 69
“A previous study suggested the effect of calcination time on activated carbon pore size distribution [42], and the micropores volume below 0.6 nm was an important influence factor on low-temperature carbon capture [43].”
InfluentialPlaza, M. G., Durán, I., Querejeta, N., Rubiera, F., & Pevida, C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b01720 · Cited by 62
Self-citationPlaza, M. G., Durán, I., Querejeta, N., Rubiera, F., & Pevida, C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b04856 · Cited by 61
Self-citationGreen coffee based CO2 adsorbent with high performance in postcombustion conditions
Plaza, M. G., González, A. S., Pevida, C., & Rubiera, F. (2015) · Fuel · doi:10.1016/j.fuel.2014.10.014 · Cited by 47
Self-citationOlivares-Marín, M., García, S., Pevida, C., Wong, M. S., & Maroto-Valer, M. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2011.06.031 · Cited by 41
Self-citationEvaluation of the cyclic capacity of low-cost carbon adsorbents for post-combustion CO2 capture
Plaza, M. G., Pevida, C., Pis, J. J., & Rubiera, F. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.01.178 · Cited by 33
“Our group has dealt with the preparation of carbon adsorbents for CO2 capture applications over recent years [11-19].”
BackgroundSelf-citationHousehold mixed plastic waste derived adsorbents for CO2 capture: A feasibility study
Dan, E., McCue, A. J., Dionisi, D., & Fernández Martín, C. (2024) · Journal of Environmental Management · doi:10.1016/j.jenvman.2024.120466 · Cited by 33
“This is likely to be significant as CO 2 uptake at post-combustion capture conditions is known to be highly influenced by the size of micropores (Martín et al., 2010, 2011).”
Background
Metadata
- Authors
- Martín, C. F., Plaza, M. G., Pis, J. J., Rubiera, F., Pevida, C., & Centeno, T. A.
- Venue
- Separation and Purification Technology
- Publisher
- Elsevier BV
- Published
- 2010-08-17
- Volume
- 74
- Issue
- 2
- Pages
- 225-229
- ISSN
- 1383-5866 (ISSN-L)
- OpenAlex
- W2046029447
- Cited by
- 127
- References
- 0
- FWCI
- 23.12
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.