The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
3D-Printed graphene/polylactic acid electrode for bioanalysis: Biosensing of glucose and simultaneous determination of uric acid and nitrite in biological fluids
Abstract
Abstract Additive manufacturing, also known as 3D-printing, is receiving great interest by chemists due to the easy design of novel materials, fast prototyping and reducing waste, which enables large-scale fabrication of electrochemical devices. Herein we demonstrate the development of (bio)sensors for the analysis of biological fluids using 3D-printing. Fused deposition modelling was used to fabricate (bio)sensing platforms from commercially-available filaments made of polylactic acid containing graphene (G-PLA). An enzymatic glucose biosensor fabricated on the G-PLA surface was developed and applied for glucose sensing in blood plasma using chronoamperometry. Oxygenated groups from the polymeric matrix provides suitable condition to enzyme immobilization by crosslinking with glutaraldehyde. The biosensor presented a limit of detection (LOD) of 15 μmol L−1, inter-day and intra-day precision lower than 5 %, and adequate recovery values (90–105 %) for the analysis of plasma. We also show that the surface treatment of the 3D-printed sensor (mechanical polishing followed solvent immersion) provides improved electrochemical properties for the direct detection of nitrite and uric acid. Differential-pulse voltammetry and multiple-pulse amperometry under flow conditions were evaluated and compared for the determination of both species in saliva and urine. Highlights are presented for the amperometric detection within a linear range from 0.5–250 μmol L−1 for both analytes, LODs of 0.02 and 0.03 μmol L−1 for uric acid and nitrite, respectively, and high precision (RSD
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Glucose Biosensors
Wang, J. (2008) · Chemical Reviews · doi:10.1021/cr068123a · Cited by 3,498
Recent Advances in Analytical Chemistry by 3D Printing
Gross, B., Lockwood, S. Y., & Spence, D. M. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04344 · Cited by 359
Fully 3D-Printed Preconcentrator for Selective Extraction of Trace Elements in Seawater
Su, C.-K., Peng, P.-J., & Sun, Y.-C. (2015) · Analytical Chemistry · doi:10.1021/acs.analchem.5b01599 · Cited by 111
Nitrate pharmacokinetics: taking note of the difference
James, P. E., Willis, G. R., Allen, J. D., Winyard, P. G., & Jones, A. M. (2015) · Nitric Oxide · doi:10.1016/j.niox.2015.04.006 · Cited by 79
Simple, Expendable, 3D-Printed Microfluidic Systems for Sample Preparation of Petroleum
Kataoka, É. M., Murer, R. C., Santos, J. M., Carvalho, R. M., Eberlin, M. N., Augusto, F., Poppi, R. J., Gobbi, A. L., & Hantao, L. W. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04413 · Cited by 63
Wang, H., Cocovi-Solberg, D. J., Hu, B., & Miró, M. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b03767 · Cited by 59
Cited by
Additive-manufactured (3D-printed) electrochemical sensors: A critical review
Cardoso, R. M., Kalinke, C., Rocha, R. G., dos Santos, P. L., Rocha, D. P., Oliveira, P. R., Janegitz, B. C., Bonacin, J. A., Richter, E. M., & Munoz, R. A. A. (2020) · Analytica Chimica Acta · doi:10.1016/j.aca.2020.03.028 · Cited by 460
Self-citationExtrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 454
Metadata
- Authors
- Cardoso, R. M., Silva, P. R. L., Lima, A. P., Rocha, D. P., Oliveira, T. C., do Prado, T. M., Fava, E. L., Fatibello-Filho, O., Richter, E. M., & Muñoz, R. A. A.
- Venue
- Sensors and Actuators B: Chemical
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 307
- Pages
- 127621
- ISSN
- 0925-4005 (ISSN-L)
- OpenAlex
- W2996633082
- Cited by
- 231
- References
- 6
- FWCI
- 10.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D-Printed graphene/polylactic acid electrode for bioanalysis: Biosensing of glucose and simultaneous determination of uric acid and nitrite in biological fluids. https://app.cochat.ai/papers/10.1016/j.snb.2019.127621
- The paper
- Cardoso, R. M., Silva, P. R. L., Lima, A. P., Rocha, D. P., Oliveira, T. C., do Prado, T. M., Fava, E. L., Fatibello-Filho, O., Richter, E. M., & Muñoz, R. A. A. (2020). 3D-Printed graphene/polylactic acid electrode for bioanalysis: Biosensing of glucose and simultaneous determination of uric acid and nitrite in biological fluids. Sensors and Actuators B: Chemical. https://doi.org/10.1016/j.snb.2019.127621
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.