The DOI matches its Crossref record; 123 of the 123 references it cites were found in a registry or an index.
A comprehensive review on development of eutectic organic phase change materials and their composites for low and medium range thermal energy storage applications
Abstract
The excessively available solar energy storage is a very useful way to bridge the energy demand and its supply gap. This thermal energy storage (TES) can be done in the form of sensible or latent heat energy. The energy storage in the form of latent heat energy is better than the sensible energy storage in terms of operating temperature and storage density. Organic PCMs (O-PCMs) have great potential, especially from low to medium temperature-TES applications due to their several admirable thermal and physical characteristics. An appropriate melting point/enthalpy of O-PCMs is mainly required parameters for TES applications. In this regard, development of eutectic O-PCMs (EO-PCMs) by mixing two or more PCMs customizes the melting temperature and enthalpy so that they can be made suitable for targeted TES applications. However, their low thermal conductivity and leakage issue during the phase transition significantly restrict the practices of EO-PCM. A lot of studies were carried out to solve these changes by preparing them in form stable or shape-stabilized composite form. This review paper provides an insight on the development and thermo-physical properties of eutectic (binary and ternary) EO-PCMs as well as their composites as nano-enhanced and form stable phase change materials (FSPCMs). This paper also highlights recent studies published about the enhancement of thermal conductivity of EO-PCMs and their FSPCMs developed for LHTES practices. The use of EO-PCMs and their form stable composites in various applications, and challenges faced are also discussed. Finally, it outlooks the future directions for development of eutectic organic PCMs and their applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemically Functionalized Carbon Nanotubes
Balasubramanian, K., & Burghard, M. (2005) · Small · doi:10.1002/smll.200400118 · Cited by 1,769
Review and Comparison of Nanofluid Thermal Conductivity and Heat Transfer Enhancements
Yu, W., France, D. M., Routbort, J. L., & Choi, S. U. S. (2008) · Heat Transfer Engineering · doi:10.1080/01457630701850851 · Cited by 1,175
Phase change materials for building applications: A state-of-the-art review
Baetens, R., Jelle, B. P., & Gustavsen, A. (2010) · Energy and Buildings · doi:10.1016/j.enbuild.2010.03.026 · Cited by 997
Umair, M. M., Zhang, Y., Iqbal, K., Zhang, S., & Tang, B. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.11.017 · Cited by 852
Sharma, R. K., Ganesan, P., Tyagi, V. V., Metselaar, H. S. C., & Sandaran, S. C. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.01.084 · Cited by 809
Self-citationDevelopment of phase change materials based microencapsulated technology for buildings: A review
Tyagi, V. V., Kaushik, S. C., Tyagi, S. K., & Akiyama, T. (2011) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2010.10.006 · Cited by 779
Self-citationHuang, X., Chen, X., Li, A., Atinafu, D., Gao, H., Dong, W., & Wang, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.09.013 · Cited by 701
Organic phase change materials and their textile applications: An overview
Sarier, N., & Onder, E. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.04.013 · Cited by 681
Review on using microencapsulated phase change materials (PCM) in building applications
Konuklu, Y., Ostry, M., Paksoy, H. O., & Charvat, P. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.07.019 · Cited by 430
Wang, C., Feng, L., Li, W., Zheng, J., Tian, W., & Li, X. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.05.031 · Cited by 428
Lv, P., Liu, C., & Rao, Z. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.10.014 · Cited by 405
A multicomponent PCM wall optimized for passive solar heating
Peippo, K., Kauranen, P., & Lund, P. D. (1991) · Energy and Buildings · doi:10.1016/0378-7788(91)90009-r · Cited by 349
Fatty acids and their mixtures as phase-change materials for thermal energy storage
Feldman, D., Shapiro, M. M., Banu, D., & Fuks, C. J. (1989) · Solar Energy Materials · doi:10.1016/0165-1633(89)90054-3 · Cited by 305
Khadiran, T., Hussein, M. Z., Zainal, Z., & Rusli, R. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.06.039 · Cited by 295
Shilei, L., Neng, Z., & Guohui, F. (2006) · Energy and Buildings · doi:10.1016/j.enbuild.2005.10.006 · Cited by 266
Review on micro/nano phase change materials for solar thermal applications
Qiu, L., Ouyang, Y., Feng, Y., & Zhang, X. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.03.088 · Cited by 255
Heat retention of a photovoltaic/thermal collector with PCM
Browne, M. C., Norton, B., & McCormack, S. J. (2016) · Solar Energy · doi:10.1016/j.solener.2016.04.024 · Cited by 250
Tao, Y. B., Lin, C. H., & He, Y. L. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.03.051 · Cited by 242
Bo, H., Gustafsson, E. M., & Setterwall, F. (1999) · Energy · doi:10.1016/s0360-5442(99)00055-9 · Cited by 240
Development and application of organic phase change mixtures in thermal storage gypsum wallboard
Feldman, D., Banu, D., & Hawes, D. W. (1995) · Solar Energy Materials and Solar Cells · doi:10.1016/0927-0248(94)00168-r · Cited by 234
Microencapsulation of coco fatty acid mixture for thermal energy storage with phase change material
Özonur, Y., Mazman, M., Paksoy, H. Ö., & Evliya, H. (2006) · International Journal of Energy Research · doi:10.1002/er.1177 · Cited by 228
Karaipekli, A., & Sarı, A. (2010) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2010.07.003 · Cited by 216
Self-citationLi, M., Wu, Z., & Kao, H. (2011) · Applied Energy · doi:10.1016/j.apenergy.2011.02.030 · Cited by 204
Sarı, A., Sarı, H., & Önal, A. (2004) · Energy Conversion and Management · doi:10.1016/s0196-8904(03)00154-7 · Cited by 203
Self-citationLi, M., Kao, H., Wu, Z., & Tan, J. (2011) · Applied Energy · doi:10.1016/j.apenergy.2010.11.001 · Cited by 202
Sun, Z., Zhang, Y., Zheng, S., Park, Y., & Frost, R. L. (2013) · Thermochimica Acta · doi:10.1016/j.tca.2013.02.005 · Cited by 193
Zhang, N., Yuan, Y., Wang, X., Cao, X., Yang, X., & Hu, S. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.07.008 · Cited by 190
Tian, B., Yang, W., Luo, L., Wang, J., Zhang, K., Fan, J., Wu, J., & Xing, T. (2016) · Solar Energy · doi:10.1016/j.solener.2016.01.011 · Cited by 184
Atinafu, D. G., Dong, W., Huang, X., Gao, H., & Wang, G. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.025 · Cited by 182
Sarı, A. (2005) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2005.01.010 · Cited by 180
Self-citationSari, A., & Kaygusuz, K. (2002) · Solar Energy · doi:10.1016/s0038-092x(02)00026-9 · Cited by 179
Li, M., Wu, Z., & Kao, H. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.04.017 · Cited by 168
Tang, F., Su, D., Tang, Y., & Fang, G. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.05.045 · Cited by 167
Yang, Y., Wu, W., Fu, S., & Zhang, H. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.118479 · Cited by 159
Zhang, N., Yuan, Y., Yuan, Y., Li, T., & Cao, X. (2014) · Energy and Buildings · doi:10.1016/j.enbuild.2014.07.049 · Cited by 158
Corrosion of metal containers for use in PCM energy storage
Ferrer, G., Solé, A., Barreneche, C., et al. (2014) · Renewable Energy · doi:10.1016/j.renene.2014.11.036 · Cited by 157
Ke, H. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.11.158 · Cited by 157
Song, S., Dong, L., Chen, S., Xie, H., & Xiong, C. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.02.045 · Cited by 154
Zhang, H., Gao, X., Chen, C., Xu, T., Fang, Y., & Zhang, Z. (2016) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2016.04.024 · Cited by 153
Fatty acids based eutectic phase change system for thermal energy storage applications
Nazir, H., Batool, M., Ali, M., & Kannan, A. M. (2018) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2018.07.025 · Cited by 151
Zhang, W., Zhang, X., Zhang, X., Yin, Z., Liu, Y., Fang, M., Wu, X., Min, X., & Huang, Z. (2019) · Thermochimica Acta · doi:10.1016/j.tca.2019.01.022 · Cited by 151
Alva, G., Huang, X. Y., Liu, L., & Fang, G. (2017) · Applied Energy · doi:10.1016/j.apenergy.2017.06.082 · Cited by 145
Zhang, N., Yuan, Y., Yuan, Y., Cao, X., & Yang, X. (2014) · Solar Energy · doi:10.1016/j.solener.2014.09.003 · Cited by 142
Xing, M., Yu, J., & Wang, R. (2015) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.05.005 · Cited by 141
Zhang, N., Yuan, Y., Yuan, Y., et al. (2014) · Energy · doi:10.1016/j.energy.2014.10.092 · Cited by 141
Theoretic Prediction of Melting Temperature and Latent Heat for a Fatty Acid Eutectic Mixture
Yanping, Y., Wenquan, T., Xiaoling, C., et al. (2011) · Journal of Chemical & Engineering Data · doi:10.1021/je200057j · Cited by 138
Jiang, L., Liu, Z., Yuan, Y., Yanjun, W., Lei, J., & Changlin, Z. (2018) · Energy and Buildings · doi:10.1016/j.enbuild.2018.04.044 · Cited by 134
A storage domestic solar hot water system with a back layer of phase change material
Khalifa, A. J. N., Suffer, K. H., & Mahmoud, M. S. (2012) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2012.05.017 · Cited by 129
Zhao, P., Yue, Q., He, H., Gao, B., Wang, Y., & Li, Q. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.10.048 · Cited by 128
Harikrishnan, S., Deenadhayalan, M., & Kalaiselvam, S. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.06.042 · Cited by 128
Saeed, R. M., Schlegel, J. P., Castano, C. H., et al. (2017) · Journal of Energy Storage · doi:10.1016/j.est.2017.08.005 · Cited by 120
Sun, D., & Wang, L. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.123 · Cited by 115
Saeed, R. M., Schlegel, J. P., Castano, C. H., & Sawafta, R. (2017) · Journal of Energy Storage · doi:10.1016/j.est.2017.11.003 · Cited by 113
Martín, M., Villalba, A., Fernández, A. I., & Barreneche, C. (2019) · Energy and Buildings · doi:10.1016/j.enbuild.2019.03.029 · Cited by 113
Zhang, X., Huang, Z., Yin, Z., Zhang, W., Huang, Y., Liu, Y., Fang, M., Wu, X., & Min, X. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.08.057 · Cited by 112
Karthik, M., Faik, A., & D’Aguanno, B. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.08.004 · Cited by 110
Li, C., Fu, L., Ouyang, J., & Yang, H. (2013) · Scientific Reports · doi:10.1038/srep01908 · Cited by 109
Hussain, S. I., Dinesh, R., Roseline, A. A., Dhivya, S., & Kalaiselvam, S. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.03.011 · Cited by 107
Jiao, C., Ji, B., & Fang, D. (2011) · Materials Letters · doi:10.1016/j.matlet.2011.09.099 · Cited by 104
Development of Composite PCMs by Incorporation of Paraffin into Various Building Materials
Memon, S. A., Liao, W., Yang, S., Cui, H., & Shah, S. (2015) · Materials · doi:10.3390/ma8020499 · Cited by 104
Cao, L., Tang, Y., & Fang, G. (2014) · Energy · doi:10.1016/j.energy.2014.11.046 · Cited by 104
Kim, D., Jung, J., Kim, Y., Lee, M., Seo, J., & Khan, S. B. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2015.12.049 · Cited by 102
Kahwaji, S., Johnson, M. B., Kheirabadi, A. C., Groulx, D., & White, M. A. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.01.115 · Cited by 101
Narayanan, S. S., Kardam, A., Kumar, V., Bhardwaj, N., Madhwal, D., Shukla, P., Kumar, A., Verma, A., & Jain, V. K. (2017) · Resource-Efficient Technologies · doi:10.1016/j.reffit.2016.12.004 · Cited by 99
Su, D., Jia, Y., Alva, G., Tang, F., & Fang, G. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.09.022 · Cited by 98
Tang, Y., Lin, Y., Jia, Y., & Fang, G. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.08.005 · Cited by 98
Song, S., Dong, L., Qu, Z., Ren, J., & Xiong, C. (2014) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2014.05.067 · Cited by 97
Sarı, A., & Karaipekli, A. (2007) · Materials Letters · doi:10.1016/j.matlet.2007.07.025 · Cited by 95
Self-citationCai, Y., Ke, H., Liang, L. G., et al. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2012.04.018 · Cited by 95
Lv, Y., Zhou, W., & Jin, W. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.11.042 · Cited by 95
Sarı, A., & Biçer, A. (2012) · Energy and Buildings · doi:10.1016/j.enbuild.2012.04.010 · Cited by 94
Self-citationPreparation and properties of fatty acids based thermal energy storage aggregate concrete
Wang, R., Ren, M., Gao, X., & Qin, L. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.01.034 · Cited by 94
Ma, G., Sun, J., Zhang, Y., Jing, Y., & Jia, Y. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.09.074 · Cited by 92
Luo, Z., Zhang, H., Gao, X., Xu, T., Fang, Y., & Zhang, Z. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.04.005 · Cited by 90
Dodecanoic acid as a promising phase-change material for thermal energy storage
Desgrosseilliers, L., Whitman, C. A., Groulx, D., et al. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2012.12.031 · Cited by 89
Dhivya, S., Hussain, S. I., Sheela, S. J., & Kalaiselvam, S. (2018) · Thermochimica Acta · doi:10.1016/j.tca.2018.11.010 · Cited by 89
Cai, Y., Sun, G., Liu, M., Zhang, J., Wang, Q., & Weı, Q. (2015) · Solar Energy · doi:10.1016/j.solener.2015.04.042 · Cited by 87
Sarı, A. (2005) · Energy Conversion and Management · doi:10.1016/j.enconman.2005.07.005 · Cited by 87
Self-citationPrediction of the properties of eutectic fatty acid phase change materials
Kahwaji, S., & White, M. A. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.12.024 · Cited by 85
Zhang, J., Guan, X., Song, X., Hou, H., Yang, Z., & Zhu, J. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.01.063 · Cited by 84
Differential Scanning Calorimetry Study of Blends of Poly(ethylene glycol) with Selected Fatty Acids
Pielichowski, K., & Pielichowska, K. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200390022 · Cited by 84
Döğüşcü, D. K., Altıntaş, A., Sarı, A., et al. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.06.022 · Cited by 83
Self-citationTernary mixture of fatty acids as phase change materials for thermal energy storage applications
Kant, K., Shukla, A., & Sharma, A. (2016) · Energy Reports · doi:10.1016/j.egyr.2016.10.002 · Cited by 81
Ma, L., Guo, C., Ou, R., et al. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b03933 · Cited by 81
TUNCBILEK, K., Sarı, A., Tarhan, S., Ergüneş, G., & KAYGUSUZ, K. (2004) · Energy · doi:10.1016/j.energy.2004.05.017 · Cited by 80
Self-citationSarı, A., Hekimoğlu, G., & Tyagi, V. V. (2020) · Energy · doi:10.1016/j.energy.2020.116983 · Cited by 79
Self-citationAbdolmaleki, L., Sadrameli, S. M., & Pirvaram, A. (2019) · Renewable Energy · doi:10.1016/j.renene.2019.06.035 · Cited by 78
Tang, Y., Alva, G., Huang, X. Y., Su, D., Liu, L., & Fang, G. (2016) · Energy and Buildings · doi:10.1016/j.enbuild.2016.06.031 · Cited by 75
Browne, M. C., Boyd, E., & McCormack, S. J. (2017) · Renewable Energy · doi:10.1016/j.renene.2017.02.082 · Cited by 75
Wei, T., Zheng, B., Liu, J., Gao, Y., & Guo, W. (2013) · Energy and Buildings · doi:10.1016/j.enbuild.2013.09.050 · Cited by 74
Kumar, R., Vyas, S., & Dixit, A. (2017) · Solar Energy · doi:10.1016/j.solener.2017.07.082 · Cited by 72
Warzoha, R. J., & Fleischer, A. S. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.121 · Cited by 70
Sharma, R. K., Ganesan, P., Tyagi, V. V., & Mahlia, T. M. I. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.12.023 · Cited by 70
Self-citationKeleş, S., Kaygusuz, K., & Sarı, A. (2005) · International Journal of Energy Research · doi:10.1002/er.1111 · Cited by 68
Self-citationMa, G., Liu, S., Xie, S., Jing, Y., Zhang, Q., Sun, J., & Jia, Y. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.10.004 · Cited by 67
Tang, X., Zhu, B., Xu, M., et al. (2015) · Energy and Buildings · doi:10.1016/j.enbuild.2015.09.074 · Cited by 66
Naik, B. S., Singh, L. P., Sinha, S., et al. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101400 · Cited by 66
Li, H., Liu, X., & Fang, G. (2010) · Applied Physics A · doi:10.1007/s00339-010-5724-y · Cited by 59
Fauzi, H., Metselaar, H. S. C., Mahlia, T. M. I., Silakhori, M., & Nur, H. (2013) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2013.06.050 · Cited by 59
Fauzi, H., Metselaar, H. S. C., Mahlia, T. M. I., & Silakhori, M. (2013) · Solar Energy · doi:10.1016/j.solener.2013.07.001 · Cited by 58
Chinnasamy, V., & Appukuttan, S. (2017) · Energy Technology · doi:10.1002/ente.201700540 · Cited by 58
Ke, H., Pang, Z., Peng, B., Wang, J., Cai, Y., Huang, F., & Weı, Q. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-5025-y · Cited by 57
Liu, F., Zhu, J., Liu, J., Ma, B., Zhou, W., & Li, R. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.09.076 · Cited by 51
Deka, P. P., Ansu, A. K., Sharma, R. K., Tyagi, V. V., & Sarı, A. (2020) · International Journal of Energy Research · doi:10.1002/er.5615 · Cited by 50
Self-citationAcid-hybridized expanded perlite as a composite phase-change material in wallboards
Peng, K., Zhang, J., Yang, H., & Ouyang, J. (2015) · RSC Advances · doi:10.1039/c5ra10173e · Cited by 46
Song, X., Cai, Y., Wang, W., Sun, X., Wu, Y., Weı, Q., & Hu, Y. Z. (2018) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2018.11.042 · Cited by 45
Ansu, A. K., Sharma, R. K., Tyagi, V. V., Sarı, A., Ganesan, P., & Tripathi, D. (2019) · International Journal of Energy Research · doi:10.1002/er.5079 · Cited by 44
Self-citationXie, N., Niu, J., Gao, X., Fang, Y., & Zhang, Z. (2020) · International Journal of Energy Research · doi:10.1002/er.5543 · Cited by 39
Cai, Y., Hou, X., Wang, W., et al. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.03.027 · Cited by 36
Ma, G., Sun, J., Xie, S., Wang, Z., Jing, Y., & Jia, Y. (2018) · The Journal of Chemical Thermodynamics · doi:10.1016/j.jct.2018.01.008 · Cited by 33
Hussain, S. I., Roseline, A. A., & Kalaiselvam, S. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab4768 · Cited by 30
Xie, S., Sun, J., Wang, Z., Liu, S., Han, L., Ma, G., Jing, Y., & Jia, Y. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.04.008 · Cited by 29
Fauzi, H., Metselaar, H. S. C., Mahlia, T. M. I., Ong, H. C., Nasruddin, N., & Khanlou, H. M. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.01.146 · Cited by 28
Huang, X., Guo, J., He, J., Gong, Y., Wang, D., & Song, Z. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.44866 · Cited by 26
Ansu, A. K., Sharma, R. K., Tyagi, V. V., & Tripathi, D. (2020) · ChemistrySelect · doi:10.1002/slct.202002183 · Cited by 22
Self-citationJebasingh, B. E. (2016) · Renewables Wind Water and Solar · doi:10.1186/s40807-016-0028-2 · Cited by 21
Meng, D., & Wang, L. (2013) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-013-0735-0 · Cited by 20
Wang, Z., Sun, J., Xie, S., Ma, G., & Jia, Y. (2017) · Energy Technology · doi:10.1002/ente.201700349 · Cited by 18
Yang, H., Chen, W., Kong, X., & Rong, X. (2019) · Journal of Central South University · doi:10.1007/s11771-019-4196-2 · Cited by 14
Ke, H., & Weı, Q. (2018) · Polymer Engineering and Science · doi:10.1002/pen.25001 · Cited by 13
Study on Binary Fatty Acids/ Sepiolite Composite Phase Change Material
Deng, J. H., Li, W. B., & Jiang, D. H. (2011) · Advanced materials research · doi:10.4028/www.scientific.net/amr.374-377.807 · Cited by 11
Ding, L., Wang, L., Kokogiannakis, G., Lü, Y., & Zhou, W. (2017) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-017-1663-1 · Cited by 11
EXPERIMENTAL STUDY ON PALMITIC ACID COMPOSITES CONTAINING CARBON NANOTUBES BY ACID TREATMENT
Wang, J. (2010) · Journal of Engineering Thermophysics · Cited by 4
Cited by
Hassan, F., Jamil, F., Hussain, A., Ali, H. M., Janjua, M. M., Khushnood, S., Farhan, M., Altaf, K., Said, Z., & Li, C. (2022) · Sustainable Energy Technologies and Assessments · doi:10.1016/j.seta.2021.101646 · Cited by 283
Metadata
- Authors
- Singh, P., Sharma, R. K., Ansu, A. K., Goyal, R., Sarı, A., & Tyagi, V. V.
- Venue
- Solar Energy Materials and Solar Cells
- Publisher
- Elsevier BV
- Published
- 2021-05
- Volume
- 223
- Pages
- 110955
- ISSN
- 0927-0248 (ISSN-L)
- OpenAlex
- W3119671423
- Cited by
- 327
- References
- 123
- FWCI
- 23.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.