The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
The cost of additive manufacturing: machine productivity, economies of scale and technology-push
Open accessAbstract
As part of the cosmos of digital fabrication technology, Additive Manufacturing (AM) systems are able to manufacture three-dimensional components and products directly from raw material and 3D design data. The layer-by-layer operating process of these systems does not require the use of tools, moulds or dies. Technology observers speculate that AM will have a profound economic impact on the manufacturing sector and indeed on wider society. By constructing a model of production cost for two different AM systems used commercially for the manufacture of end-use metal parts, Electron Beam Melting (EBM) and Direct Metal Laser Sintering (DMLS), this paper performs an inter-process comparison of cost performance. High specific costs, measured at £2.39 and £6.18 per cm3 of material deposited respectively, are identified as a central impediment to more widespread technology adoption of such additive systems. The research demonstrates differing levels of system productivity, suggesting that the observed deposition rates are not sufficient for the adoption of EBM and DMLS in high volume manufacturing applications. Despite the absence of amortisable tooling costs, the analysis also reveals that economies of scale are achievable in AM. The results reached are further discussed in the light of the varying strategic requirements posed by the market-pull and technology-push modes of innovation which are both found in the AM industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Rogers, E. M., Singhal, A., & Quinlan, M. M. (2019) · An Integrated Approach to Communication Theory and Research · doi:10.4324/9780203710753-35 · Cited by 37,322
Competitive Strategy: Techniques for Analyzing Industries and Competitors
(1980) · Journal of Sustainable Competitive Intelligence · doi:10.24883/iberoamericanic.v2i2.38 · Cited by 16,592
Valente, T. W. (2003) · Genetics in Medicine · doi:10.1097/01.gim.0000061743.67794.c4 · Cited by 13,723
Mass customization: The new frontier in business competition
(1999) · Journal of Manufacturing Systems · doi:10.1016/s0278-6125(99)90108-5 · Cited by 2,322
Additive manufacturing and its societal impact: a literature review
Huang, S. H., Liu, P., Mokasdar, A., & Hou, L. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4558-5 · Cited by 1,862
Microeconomics of technology adoption
Foster, A. D., & Rosenzweig, M. R. (2010) · Annual Review of Economics · doi:10.1146/annurev.economics.102308.124433 · Cited by 1,055
Laser sintering of polyamides and other polymers
Goodridge, R. D., Tuck, C. J., & Hague, R. J. M. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2011.04.001 · Cited by 835
Self-citationMass customization: The new frontier in business competition
Niblock, M. (1993) · Long Range Planning · doi:10.1016/0024-6301(93)90218-5 · Cited by 664
Economics of additive manufacturing for end-usable metal parts
Atzeni, E., & Salmi, A. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3878-1 · Cited by 630
The Productivity Dilemma: Roadblock to Innovation in the Automobile Industry
Black, G., & Abernathy, W. J. (1979) · Southern Economic Journal · doi:10.2307/1057440 · Cited by 610
Cited by
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Additive manufacturing: Challenges, trends, and applications
Abdulhameed, O., Al-Ahmari, A., Ameen, W., & Mian, S. H. (2019) · Advances in Mechanical Engineering · doi:10.1177/1687814018822880 · Cited by 861
Scientific, technological and economic issues in metal printing and their solutions
DebRoy, T., Mukherjee, T., Milewski, J. O., Elmer, J. W., Ribic, B., Blecher, J. J., & Zhang, W. (2019) · Nature Materials · doi:10.1038/s41563-019-0408-2 · Cited by 543
Applications of additive manufacturing in the construction industry – A forward-looking review
Delgado Camacho, D., Clayton, P., O'Brien, W. J., Seepersad, C., Juenger, M., Ferron, R., & Salamone, S. (2018) · Automation in Construction · doi:10.1016/j.autcon.2017.12.031 · Cited by 538
Unlocking value for a circular economy through 3D printing: A research agenda
Despeisse, M., Baumers, M., Brown, P., Charnley, F., Ford, S. J., Garmulewicz, A., Knowles, S., Minshall, T. H. W., Mortara, L., Reed-Tsochas, F. P., et al. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2016.09.021 · Cited by 529
Self-citationAdditive Manufacturing Processes in Medical Applications
Salmi, M. (2021) · Materials · doi:10.3390/ma14010191 · Cited by 500
Jiang, R., Kleer, R., & Piller, F. T. (2017) · Technological Forecasting and Social Change · doi:10.1016/j.techfore.2017.01.006 · Cited by 480
Sustainability of additive manufacturing: An overview on its energy demand and environmental impact
Peng, T., Kellens, K., Tang, R., Chen, C., & Chen, G. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.022 · Cited by 426
The Potential of Additive Manufacturing in the Smart Factory Industrial 4.0: A Review
Mehrpouya, M., Dehghanghadikolaei, A., Fotovvati, B., Vosooghnia, A., Emamian, S. S., & Gisario, A. (2019) · Applied Sciences · doi:10.3390/app9183865 · Cited by 419
Defining and assessing industry 4.0 maturity levels – case of the defence sector
Bibby, L., & Dehe, B. (2018) · Production Planning & Control · doi:10.1080/09537287.2018.1503355 · Cited by 417
Additive manufacturing tooling for the automotive industry
Leal, R., Barreiros, F. M., Alves, L., Romeiro, F., Vasco, J. C., Santos, M., & Marto, C. (2017) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-017-0239-8 · Cited by 388
A review of powder additive manufacturing processes for metallic biomaterials
Harun, W. S. W., Kamariah, M. S. I. N., Muhamad, N., Ghani, S. A. C., Ahmad, F., & Mohamed, Z. (2018) · Powder Technology · doi:10.1016/j.powtec.2017.12.058 · Cited by 379
Weng, Y., Li, M., Ruan, S., Wong, T. N., Tan, M. J., Ow Yeong, K. L., & Qian, S. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121245 · Cited by 305
Why manufacturers adopt additive manufacturing technologies: The role of sustainability
Niaki, M. K., Torabi, S. A., & Nonino, F. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.03.019 · Cited by 298
Design for additive manufacturing: Framework and methodology
Vaneker, T., Bernard, A., Moroni, G., Gibson, I., & Zhang, Y. (2020) · CIRP Annals · doi:10.1016/j.cirp.2020.05.006 · Cited by 289
Zaldivar, R. J., Witkin, D. B., McLouth, T., Patel, D. N., Schmitt, K., & Nokes, J. P. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2016.11.007 · Cited by 277
Abd-Elaziem, W., Elkatatny, S., Abd-Elaziem, A.-E., Khedr, M., Abd El-baky, M. A., Hassan, M. A., Abu-Okail, M., Mohammed, M., Järvenpää, A., Allam, T., et al. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.07.085 · Cited by 257
Kim, D., Shim, J.-S., Lee, D., Shin, S.-H., Nam, N.-E., Park, K.-H., Shim, J.-S., & Kim, J.-E. (2020) · Polymers · doi:10.3390/polym12112762 · Cited by 253
Potential of additive manufacturing for upstream automotive supply chains
Muhammad, M. S., Kerbache, L., & Elomri, A. (2022) · Supply Chain Forum: An International Journal · doi:10.1080/16258312.2021.1973872 · Cited by 65
Liu, W., Liu, X., Liu, Y., Wang, J., Evans, S., & Yang, M. (2023) · Sustainability · doi:10.3390/su15043827 · Cited by 27
Ni, B., Glaser, B., & Taheri-Mousavi, S. M. (2025) · npj Computational Materials · doi:10.1038/s41524-025-01768-2 · Cited by 23
Metadata
- Authors
- Baumers, M., Dickens, P., Tuck, C., & Hague, R.
- Venue
- Technological Forecasting and Social Change
- Publisher
- Elsevier BV
- Published
- 2016-01
- Volume
- 102
- Pages
- 193-201
- ISSN
- 0040-1625 (ISSN-L)
- OpenAlex
- W2010360743
- Cited by
- 658
- References
- 33
- FWCI
- 43.48
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.