The DOI matches its Crossref record; 115 of the 115 references it cites were found in a registry or an index.
Design for additive manufacturing: Framework and methodology
Open accessAbstract
Abstract In recent decades additive manufacturing (AM) has evolved from a prototyping to a production technology. It is used to produce end-use-parts for medical, aerospace, automotive and other industrial applications from small series up to 100,000 of commercially successful products. Metal additive manufacturing processes are relatively slow, require complex preparation and post-processing treatment while using expensive machinery, resulting in high production costs per product. Design for Additive Manufacturing (DfAM) aims at optimizing the product design to deal with the complexity of the production processes, while also defining decisive benefits of the AM based product in the usage stages of its life cycle. Recent investigations have shown that the lack of knowledge on DfAM tools and techniques are seen as one of the barriers for the further implementation of AM. This paper presents a framework for DfAM methods and tools, subdivided into three distinct stages of product development: AM process selection, product redesign for functionality enhancement, and product optimization for the AM process chosen. It will illustrate the applicability of the design framework using examples from both research and industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Topology optimization approaches: A comparative review
Sigmund, O., & Maute, K. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-013-0978-6 · Cited by 2,890
A simple evolutionary procedure for structural optimization
Xie, Y. M., & Steven, G. P. (1993) · Computers & Structures · doi:10.1016/0045-7949(93)90035-c · Cited by 2,707
Materials Selection in Mechanical Design
(2011) · Elsevier eBooks · doi:10.1016/c2009-0-25539-5 · Cited by 2,679
Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., Bernard, A., Schulz, J., Graf, P., Ahuja, B., et al. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.05.004 · Cited by 2,017
Self-citationProduct design for manufacture and assembly
Boothroyd, G. (1994) · Computer-Aided Design · doi:10.1016/0010-4485(94)90082-5 · Cited by 1,726
Wu, B., Pan, Z., Ding, D., Cuiuri, D., Li, H., Xu, J., & Norrish, J. (2018) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2018.08.001 · Cited by 1,577
Brunette, D. M., Tengvall, P., Textor, M., & Thomsen, P. (2001) · Engineering Materials · doi:10.1007/978-3-642-56486-4 · Cited by 1,547
Consolidation phenomena in laser and powder-bed based layered manufacturing
Kruth, J.-P., Levy, G., Klocke, F., & Childs, T. H. C. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.10.004 · Cited by 1,444
Progress in Additive Manufacturing and Rapid Prototyping
Kruth, J.-P., Leu, M. C., & Nakagawa, T. (1998) · CIRP Annals · doi:10.1016/s0007-8506(07)63240-5 · Cited by 1,331
Cited by
Material-structure-performance integrated laser-metal additive manufacturing
Gu, D., Shi, X., Poprawe, R., Bourell, D. L., Setchi, R., & Zhu, J. (2021) · Science · doi:10.1126/science.abg1487 · Cited by 1,703
Benedetti, M., du Plessis, A., Ritchie, R. O., Dallago, M., Razavi, N., & Berto, F. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100606 · Cited by 788
Additive manufacturing of heat exchangers in aerospace applications: a review
Careri, F., Khan, R. H. U., Todd, C., & Attallah, M. M. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.121387 · Cited by 320
3D Printing for Repair: An Approach for Enhancing Repair
van Oudheusden, A. V., Bolaños Arriola, J. B., Faludi, J., Flipsen, B., & Balkenende, R. (2023) · Sustainability · doi:10.3390/su15065168 · Cited by 17
Metadata
- Authors
- Vaneker, T., Bernard, A., Moroni, G., Gibson, I., & Zhang, Y.
- Venue
- CIRP Annals
- Publisher
- Elsevier BV
- Published
- 2020
- Volume
- 69
- Issue
- 2
- Pages
- 578-599
- ISSN
- 0007-8506 (ISSN-L)
- OpenAlex
- W3047477704
- Cited by
- 289
- References
- 115
- FWCI
- 15.14
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Design for additive manufacturing: Framework and methodology. https://app.cochat.ai/papers/10.1016/j.cirp.2020.05.006
- The paper
- Vaneker, T., Bernard, A., Moroni, G., Gibson, I., & Zhang, Y. (2020). Design for additive manufacturing: Framework and methodology. CIRP Annals. https://doi.org/10.1016/j.cirp.2020.05.006
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.