Critical review of real-time methods for solid waste characterisation: Informing material recovery and fuel production
Open accessThe DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Waste management processes generally represent a significant loss of material, energy and economic resources, so legislation and financial incentives are being implemented to improve the recovery of these valuable resources whilst reducing contamination levels. Material recovery and waste derived fuels are potentially valuable options being pursued by industry, using mechanical and biological processes incorporating sensor and sorting technologies developed and optimised for recycling plants. In its current state, waste management presents similarities to other industries that could improve their efficiencies using process analytical technology tools. Existing sensor technologies could be used to measure critical waste characteristics, providing data required by existing legislation, potentially aiding waste treatment processes and assisting stakeholders in decision making. Optical technologies offer the most flexible solution to gather real-time information applicable to each of the waste mechanical and biological treatment processes used by industry. In particular, combinations of optical sensors in the visible and the near-infrared range from 800nm to 2500nm of the spectrum, and different mathematical techniques, are able to provide material information and fuel properties with typical performance levels between 80% and 90%. These sensors not only could be used to aid waste processes, but to provide most waste quality indicators required by existing legislation, whilst offering better tools to the stakeholders.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solid waste management challenges for cities in developing countries
Guerrero, L. A., Maas, G., & Hogland, W. (2013) · Waste Management · doi:10.1016/j.wasman.2012.09.008 · Cited by 2,008 · cited 1×
“Stakeholders, particularly in developing countries, prefer waste management systems with high efficiency and lower costs (Guerrero et al., 2013).”
BackgroundChadwick, D. T., McDonnell, K. P., Brennan, L. P., Fagan, C. C., & Everard, C. D. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.11.006 · Cited by 62
Mauruschat, D., Plinke, B., Aderhold, J., Gunschera, J., Meinlschmidt, P., & Salthammer, T. (2016) · Wood Science and Technology · doi:10.1007/s00226-015-0785-x · Cited by 62 · cited 1×
“Other uses of optical infrared methods are to identify specific substances or materials grades, such as the investigation of Mauruschat et al. (2015) to use NIR hyperspectral imaging to detect chemical preservatives and plastics contaminants in wood.”
BackgroundPilot scale evaluation of sorting technologies for CCA treated wood waste
Blassino, M., Solo-Gabriele, H., & Townsend, T. (2002) · Waste Management & Research: The Journal for a Sustainable Circular Economy · doi:10.1177/0734242x0202000310 · Cited by 48 · cited 1×
“…is excited with X-ray or gamma-ray radiation, and has been extensively investigated to detect preservative inorganic chemicals in waste wood from construction and demolition sources (Blassino et al., 2002; Block et al., 2007; Jacobi et al., 2007; Solo-Gabriele et al., 2004; Yasuda et al., 2006).”
BackgroundRasem Hasan, A., Schindler, J., Solo-Gabriele, H. M., & Townsend, T. G. (2011) · Waste Management · doi:10.1016/j.wasman.2010.11.010 · Cited by 43 · cited 2×
“The XRF methods were able to identify contaminated wood with a wide range of measurement time required per sample (0.25–6 s) (Rasem Hasan et al., 2011).”
MethodInfluentialEvaluation of methods for sorting CCA-treated wood
Jacobi, G., Solo-Gabriele, H., Townsend, T., & Dubey, B. (2007) · Waste Management · doi:10.1016/j.wasman.2006.09.014 · Cited by 38 · cited 1×
“…is excited with X-ray or gamma-ray radiation, and has been extensively investigated to detect preservative inorganic chemicals in waste wood from construction and demolition sources (Blassino et al., 2002; Block et al., 2007; Jacobi et al., 2007; Solo-Gabriele et al., 2004; Yasuda et al., 2006).”
BackgroundBasic evaluation of sorting technologies for CCA treated wood waste
Yasuda, K., Tanaka, M., & Deguchi, Y. (2006) · WIT Transactions on Biomedicine and Health, Vol 10 · doi:10.2495/etox060321 · Cited by 8 · cited 1×
“…is excited with X-ray or gamma-ray radiation, and has been extensively investigated to detect preservative inorganic chemicals in waste wood from construction and demolition sources (Blassino et al., 2002; Block et al., 2007; Jacobi et al., 2007; Solo-Gabriele et al., 2004; Yasuda et al., 2006).”
Background
Cited by
da Silva, D. J., & Wiebeck, H. (2022) · Journal of Polymers and the Environment · doi:10.1007/s10924-022-02396-3 · Cited by 58
Mancini, M., & Rinnan, Å. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.05.137 · Cited by 22
Lesar, B., Humar, M., & Hora, G. (2018) · Waste Management · doi:10.1016/j.wasman.2018.08.002 · Cited by 21
Study of Variability of Waste Wood Samples Collected in a Panel Board Industry
Mancini, M., & Rinnan, Å. (2021) · Frontiers in Chemistry · doi:10.3389/fchem.2021.722090 · Cited by 5
Metadata
- Authors
- Vrancken, C., Longhurst, P. J., & Wagland, S. T.
- Venue
- Waste Management
- Publisher
- Elsevier BV
- Published
- 2017-03
- Volume
- 61
- Pages
- 40-57
- ISSN
- 0956-053X (ISSN-L)
- OpenAlex
- W2580402836
- Cited by
- 111
- References
- 7
- FWCI
- 6.13
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Critical review of real-time methods for solid waste characterisation: Informing material recovery and fuel production. https://app.cochat.ai/papers/10.1016/j.wasman.2017.01.019
- The paper
- Vrancken, C., Longhurst, P. J., & Wagland, S. T. (2017). Critical review of real-time methods for solid waste characterisation: Informing material recovery and fuel production. Waste Management. https://doi.org/10.1016/j.wasman.2017.01.019
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.