The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Enhanced removal of arsenite and arsenate by a multifunctional Fe-Ti-Mn composite oxide: Photooxidation, oxidation and adsorption
Abstract
In order to attain a high-efficiency and low-cost adsorbent for both arsenate (As(V)) and arsenite (As(III)) removal from As-contaminated water, a novel nanostructured Fe-Ti-Mn composite oxide (FTMO) was fabricated through a one-step simultaneous oxidation and co-precipitation method. Batch control experiments and series of spectroscopy detection technologies were carried out to investigate the surface change of the FTMO adsorbent and the respective role of Fe, Ti and Mn content in the arsenic adsorption process. The results showed that the FTMO adsorbent had a high adsorption capacity for both As(V) and As(III) (especially for the latter one) via the formation of inner-sphere complexes at the water/oxide interface under both darkness and light conditions. The material could effectively oxidize As(III) to As(V) and light illumination could further apparently enhance the As(III) oxidation, thus achieving high adsorption efficiency of As(III). Combined with the characterizations from FTIR, ESR and XPS, it was assumed that the predominant As(III) removal mechanism could be attributed to the coupling of various processes including photooxidation, oxidation and adsorption. The Ti and Mn contents were dominant for the As(III) oxidation, while the Fe content mainly played an important role for the adsorption of newly formed As(V). However, the involvement of surface hydroxyl groups and the formation of inner-sphere surface complexes were primarily responsible for the As(V) adsorption mechanism. Moreover, the successful removal of arsenic from real water matrices made the FTMO a potentially attractive adsorbent for both As(V) and As(III) removal.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Arsenic removal from water/wastewater using adsorbents—A critical review
Mohan, D., & Pittman, C. U. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.01.006 · Cited by 3,536
A review of the arsenic cycle in natural waters
Ferguson, J. F., & Gavis, J. (1972) · Water Research · doi:10.1016/0043-1354(72)90052-8 · Cited by 1,013
Adsorption of arsenate and arsenite on titanium dioxide suspensions
Dutta, P. K., Ray, A. K., Sharma, V. K., & Millero, F. J. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.06.015 · Cited by 415
Cited by
Wang, A., Zheng, Z., Wang, H., Chen, Y., Luo, C., Liang, D., Hu, B., Qiu, R., & Yan, K. (2020) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.119171 · Cited by 425
Abidli, A., Huang, Y., Ben Rejeb, Z., Zaoui, A., & Park, C. B. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.133102 · Cited by 194
Metadata
- Authors
- Zhang, W., Zhang, G., Liu, C., Li, J., Zheng, T., Ma, J., Wang, L., Jiang, J., & Zhai, X.
- Venue
- Water Research
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 147
- Pages
- 264-275
- ISSN
- 0043-1354 (ISSN-L)
- OpenAlex
- W2895236893
- Cited by
- 178
- References
- 3
- FWCI
- 8.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhanced removal of arsenite and arsenate by a multifunctional Fe-Ti-Mn composite oxide: Photooxidation, oxidation and adsorption. https://app.cochat.ai/papers/10.1016/j.watres.2018.10.001
- The paper
- Zhang, W., Zhang, G., Liu, C., Li, J., Zheng, T., Ma, J., Wang, L., Jiang, J., & Zhai, X. (2018). Enhanced removal of arsenite and arsenate by a multifunctional Fe-Ti-Mn composite oxide: Photooxidation, oxidation and adsorption. Water Research. https://doi.org/10.1016/j.watres.2018.10.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.