Treatment of leather industrial effluents by filtration and coagulation processes
Open accessThe DOI matches its Crossref record.
Abstract
This study focused on effluents characterization and accessing physical and chemical treatment by filtration and coagulation processes. The analysis results of the raw effluents reveal that the effluents were yellowish-brown color, having basic pH, very high values of BOD5, COD, TDS, TSS, TS and high concentrations of Cr, Na, SO42− and other organic and inorganic constituents. After settling and a subsequent filtration of raw tannery effluents through sand-stone, the filtered effluents were treated with various doses of FeCl3. The study observed that coagulant (FeCl3) of 150 mg/L dose near neutral pH showed the best removal efficiencies for major physico-chemical parameters. The analysis results illustrate that most of the physical and chemical parameters were found well below the prescribed permissible limits for effluent discharged. The study suggests that untreated tannery effluents would be treated by a combined process consisting of settling, filtering and coagulating with FeCl3.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Bharagava, R. N., & Mishra, S. (2018) · Ecotoxicology and Environmental Safety · doi:10.1016/j.ecoenv.2017.08.040 · Cited by 389
Role of Industries in Water Scarcity and Its Adverse Effects on Environment and Human Health
Chowdhary, P., Bharagava, R. N., Mishra, S., & Khan, N. (2020) · Environmental Concerns and Sustainable Development · doi:10.1007/978-981-13-5889-0_12 · Cited by 367
Sathya, K., Nagarajan, K., Carlin Geor Malar, G., Rajalakshmi, S., & Raja Lakshmi, P. (2022) · Applied Water Science · doi:10.1007/s13201-022-01594-7 · Cited by 347
Bhardwaj, A., Kumar, S., & Singh, D. (2023) · Water Quality Research Journal · doi:10.2166/wqrj.2023.002 · Cited by 98
Kumar, R., Basu, A., Bishayee, B., Chatterjee, R. P., Behera, M., Ang, W. L., Pal, P., Shah, M., Tripathy, S. K., Ambika, S., et al. (2023) · Environmental Research · doi:10.1016/j.envres.2023.115881 · Cited by 67
Acute Ecotoxicity Potential of Untreated Tannery Wastewater Release in Arequipa, Southern Peru
Tejada-Meza, K., Arenazas-Rodríguez, A., Garcia-Chevesich, P. A., Flores-Farfan, C., Morales-Paredes, L., Romero-Mariscal, G., Ticona-Quea, J., Vanzin, G., & Sharp, J. O. (2023) · Sustainability · doi:10.3390/su152115240 · Cited by 15
Metadata
- Authors
- Chowdhury, M., Mostafa, M. G., Biswas, T. K., & Saha, A. K.
- Venue
- Water Resources and Industry
- Publisher
- Elsevier BV
- Published
- 2013-09
- Volume
- 3
- Pages
- 11-22
- ISSN
- 2212-3717 (ISSN-L)
- OpenAlex
- W2046959228
- Cited by
- 213
- References
- 0
- FWCI
- 4.93
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.