The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
A novel method based on self-sensing motor drive system for misalignment detection
Abstract
In the diagnosis of electromechanical system, traditional vibration analysis methods are affected by the positioning of additional sensors. To overcome this problem, we propose a virtual phase torque (VPT) diagram method based on self-sensing motor drive system. Firstly, the q-axis current is obtained from field oriented control (FOC) process of permanent magnet synchronous motor (PMSM) drive system and used for load torque sensing. Then, fault components extracted from q-axis current and the phase angle from motor encoder are combined together to form the VPT diagram to detect the offset angle of misalignment. Therefore, misalignments in different directions can be classified. Simulations and experiments using a ball screw platform are implemented to validate the proposed method.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In [176] it was shown in simulations and in experimental tests that the virtual phase torque (VPT) diagram method based on selfsensing motor drive system enables the detection of the offset angle of misalignment.”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [176]
Citations
Cites
ENSEMBLE EMPIRICAL MODE DECOMPOSITION: A NOISE-ASSISTED DATA ANALYSIS METHOD
WU, Z., & HUANG, N. E. (2009) · Advances in Adaptive Data Analysis · doi:10.1142/s1793536909000047 · Cited by 8,715
Convolutional Neural Network Based Fault Detection for Rotating Machinery
Janssens, O., Slavkovikj, V., Vervisch, B., Stockman, K., Loccufier, M., Verstockt, S., Van de Walle, R., & Van Hoecke, S. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.05.027 · Cited by 1,255
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
Ebrahimi, B. M., Javan Roshtkhari, M., Faiz, J., & Khatami, S. V. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2263777 · Cited by 271
Jalan, A. K., & Mohanty, A. R. (2009) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2009.07.014 · Cited by 269
New clustering algorithm-based fault diagnosis using compensation distance evaluation technique
Lei, Y., He, Z., Zi, Y., & Chen, X. (2008) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2007.07.013 · Cited by 244
Experimental investigations on vibration response of misaligned rotors
Patel, T. H., & Darpe, A. K. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2009.04.004 · Cited by 235
Wang, J., Peng, Y., & Qiao, W. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2571258 · Cited by 173
Incipient Bearing Fault Detection via Motor Stator Current Noise Cancellation Using Wiener Filter
Zhou, W., Lu, B., Habetler, T. G., & Harley, R. G. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2023566 · Cited by 165
Thermal error forecast and performance evaluation for an air-cooling ball screw system
Xu, Z., Liu, X. J., Kim, H. K., Shin, J. H., & Lyu, S.-K. (2011) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2011.04.001 · Cited by 163
Cited by
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
Acoustic fault analysis of three commutator motors
Głowacz, A. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.07.007 · Cited by 94
Liu, Y., Zhao, Y., Li, J., Lü, H., & Ma, H. (2019) · Nonlinear Dynamics · doi:10.1007/s11071-019-05340-8 · Cited by 44
Cheng, J.-W., Bu, W., Shi, L., & Fu, J.-Q. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110366 · Cited by 36
Local maximum synchrosqueezes from entropy matching chirplet transform
He, Y. D., Hu, M., Jiang, Z., Feng, K., & Ming, X. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109476 · Cited by 32
Qin, A., Zhang, B., Ning, D., Tan, B., & Du, H. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.111049 · Cited by 30
Chen, Q., Li, Q., Wu, S., Chen, L., & Shen, C. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102617 · Cited by 30
Wang, Z., Zhang, J., Jiang, Z., Mao, Z., Chang, K., & Wang, C. (2021) · Measurement · doi:10.1016/j.measurement.2021.109527 · Cited by 25
Chen, Q., Chen, L., Li, Q., Shi, J., Wang, D., & Shen, C. (2024) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2024.3403183 · Cited by 25
Li, R., Xia, T., Luo, F., Jiang, Y., Chen, Z., & Xi, L. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102851 · Cited by 25
Sapena-Bañó, Á., Martínez‐Román, J., Puche‐Panadero, R., Pineda‐Sanchez, M., Pérez‐Cruz, J., & Riera‐Guasp, M. (2019) · International Journal of Electrical Power & Energy Systems · doi:10.1016/j.ijepes.2019.105625 · Cited by 23
Signal Enhancement Method for Mechanical Fault Diagnosis in Flexible Drive-Train
Yao, Y., Xie, B., Li, L., Ye-song, L., & Yin, Q. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2020.2975469 · Cited by 20
Self-citationNavarro-Navarro, Á., Ruiz-Sarrio, J. E., Biot-Monterde, V., Daviu, J. A. A., Becker, V., & Urschel, S. (2023) · Machines · doi:10.3390/machines11020288 · Cited by 17
Misalignment detection on linear feed axis using sensorless motor current signals
Demetgül, M., Zihan, M., Heider, I., & Fleischer, J. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-11258-8 · Cited by 17
Park, C. H., Lee, J., Kim, H., Suh, C., Youn, M., Shin, Y.-J., Ahn, S., & Youn, B. D. (2021) · IEEE Access · doi:10.1109/access.2021.3068425 · Cited by 15
A two-stage data quality improvement strategy for deep neural networks in fault severity estimation
Yao, Y., Wu, L., Xie, B., Li, L., Wang, Z., & Li, Y. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110588 · Cited by 13
Self-citationBandpass Effect and Its Compensation Method for Diagnosis in a Closed-Loop Control System
Yao, Y., Ye-song, L., & Yin, Q. (2020) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2020.2982200 · Cited by 11
Self-citationTFFC-RNN:A New RNN Based Approach for Bearing and Misalignment Compound Fault
Guo, Z., & Yang, M. (2022) · International Power Electronics Conference (IPEC) · doi:10.23919/ipec-himeji2022-ecce53331.2022.9807095 · Cited by 10
AI-based inspection of the axes of machine tools
Demetgül, M., Wang, W., Fleischer, J., & Tansel, I. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-12830-y · Cited by 10
Vibration and Acoustic Method for Detection of Cracks in Bearings: A Critical Review
Khan, S., Kumar, R., Singh, M., & Singh, J. (2021) · Lecture notes in mechanical engineering · doi:10.1007/978-981-33-4684-0_23 · Cited by 10
Data Fusion Methods for Convolutional Neural Network Based on Self-Sensing Motor Drive System
Yao, Y., Ye-song, L., Zhang, P., Xie, B., & Xia, L. (2018) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2018.8591160 · Cited by 10
Self-citationWang, Y., Jin, Y., Bi, Y., Wang, H., Wang, W., Jiang, Z., & Hu, M. (2025) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2025.112477 · Cited by 8
Efficiency Assessment of Induction Motors Drives Operating Under Shaft Misalignment Conditions
Verucchi, C., Giraldo, E., Meira, M., Ruschetti, C. R., Bossio, J. M., & Bossio, G. R. (2020) · Advances in Electrical and Electronic Engineering · doi:10.15598/aeee.v18i3.3596 · Cited by 7
Mechanical Fault Diagnosis Based on Self-Sensing Motor Drive: Review and Key Issues
Yao, Y., Li, Y., Xie, B., Li, L., & Wang, Y. (2021) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-nanjing52125.2021.9613124 · Cited by 6
Self-citationYu, H., Guo, J., & Zhang, H. (2025) · Scientific Reports · doi:10.1038/s41598-025-17297-3 · Cited by 5
Online control signal-based diagnosis of interturn short circuits of PMSM drive
Krzysztofiak, M., ZAWILAK, T., & Tarchała, G. (2023) · Archives of Electrical Engineering · doi:10.24425/aee.2023.143692 · Cited by 5
A self-sensing framework for weak fault detection of planetary gearbox
Chen, D., Zhao, M. J., Ou, S., Li, S., & Han, X. (2025) · ISA Transactions · doi:10.1016/j.isatra.2025.06.009 · Cited by 3
Self-Sensing Approach for Semi-Active Control of Variable Damping Electromagnetic Suspension System
Fu, C., Liu, P., Yu, J., Qin, A., & Ning, D. (2024) · Actuators · doi:10.3390/act13120480 · Cited by 3
Han, X., Chen, X., Zheng, F., Hua, L., & Zhuang, W. (2025) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2025.103682 · Cited by 3
Yao, Y., Xie, B., Yu, H., Li, B., Li, B., & Ye-song, L. (2023) · International Conference on Electrical Machines and Systems (ICEMS) · doi:10.1109/icems59686.2023.10345014 · Cited by 3
Self-citationXue, H., & Liu, X. (2025) · Fractal and Fractional · doi:10.3390/fractalfract9030180 · Cited by 2
Liang, H., Cui, N., Zhao, Y., Liu, Y., Giglio, M., & Sbarufatti, C. (2025) · Structural Health Monitoring · doi:10.1177/14759217251334104 · Cited by 2
Cerrada, M., Sánchez, R., Ortega, L.-R., Cabrera, D. R., & Romero, B. (2025) · Scientific Reports · doi:10.1038/s41598-025-23845-8 · Cited by 2
Health monitoring of planetary gearbox using motor’s control signals
Chen, D., Zhao, M. J., Han, X., Li, S., & Zhang, Y. (2025) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2025.119332 · Cited by 2
Cheng, J.-W., Bu, W., Hu, Z., Fu, J.-Q., Zhang, H.-R., & Shi, L. (2025) · Journal of Marine Science and Engineering · doi:10.3390/jmse13091664 · Cited by 1
Monitoring System for Diesel Generator Operation Condition via Sound Signal
Liu, Z., Zhang, K., Yao, X., Wei, H., Fang, S., & Wang, T. (2022) · International Conference on Consumer Electronics and Computer Engineering (ICCECE) · doi:10.1109/iccece54139.2022.9712688 · Cited by 1
Suh, C., Kim, H., Park, C. H., Chae, M., Yoon, J. T., Lee, I., Yoon, H., & Youn, B. D. (2025) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwaf058 · Cited by 1
A novel self-sensing-based framework for misalignment detection of shafting
Chen, D., Zhao, M., Yang, J., Sun, S., Li, S., & Zhang, Y. (2026) · Measurement Science and Technology · doi:10.1088/1361-6501/ae44bf
Jiang, J., Lei, Y., Feng, K., Yang, B., & Wang, Z. (2026) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2026.3663726
Yao, Y., Chaojie, W., Huaiying, L., Yuan, Y., Zheng, W., & Li, B. (2025) · Global Reliability and Prognostics and Health Management Conference (PHM) · doi:10.1109/phm-xian66756.2025.11427714
Self-citationEnhanced phase current measurement accuracy of PMSM based on improved adaptive linear neural network
Zhang, Q., Cao, J., Liang, X., Gao, J., He, Z., Yang, K., & Guo, H. (2026) · Measurement · doi:10.1016/j.measurement.2026.122519
Acoustic Effects Study of Shaded Pole Motor Under Bushing Fault Condition
Tati, S., Tanaram, T., & Thungsuk, N. (2019) · Institutional Repositories DataBase (IRDB)
Ewert, P., Jarosz, J. J., & Derugo, P. (2026) · IEEE Access · doi:10.1109/access.2026.3740340
Metadata
- Authors
- Yao, Y., Li, Y., & Yin, Q.
- Affiliations
- Huazhong University of Science and Technology (CN)
- Corresponding author
- Li, Yesong
- Venue
- Mechanical Systems and Signal Processing
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 116
- Pages
- 217-229
- ISSN
- 0888-3270 (ISSN-L)
- OpenAlex
- W2883551864
- Cited by
- 42
- References
- 29
- Citations by year
- 2026: 4 · 2025: 11 · 2024: 4 · 2023: 8 · 2022: 4 · 2021: 4 · 2020: 3 · 2019: 3
- FWCI
- 1.70
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Mechanical Systems and Signal Processing (publishedVersion)
- Funders
- Ministry of Science and Technology of the People's Republic of China
- National Science and Technology Major Project
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Keywords
- misalignment detection, permanent magnet synchronous motor, field-oriented control, q-axis current, ball screw, sensorless fault diagnosis, electromechanical systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.