The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
A novel method based on self-sensing motor drive system for misalignment detection
Abstract
In the diagnosis of electromechanical system, traditional vibration analysis methods are affected by the positioning of additional sensors. To overcome this problem, we propose a virtual phase torque (VPT) diagram method based on self-sensing motor drive system. Firstly, the q-axis current is obtained from field oriented control (FOC) process of permanent magnet synchronous motor (PMSM) drive system and used for load torque sensing. Then, fault components extracted from q-axis current and the phase angle from motor encoder are combined together to form the VPT diagram to detect the offset angle of misalignment. Therefore, misalignments in different directions can be classified. Simulations and experiments using a ball screw platform are implemented to validate the proposed method.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“In [176] it was shown in simulations and in experimental tests that the virtual phase torque (VPT) diagram method based on selfsensing motor drive system enables the detection of the offset angle of misalignment.”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [176]
Citations
Cites
ENSEMBLE EMPIRICAL MODE DECOMPOSITION: A NOISE-ASSISTED DATA ANALYSIS METHOD
WU, Z., & HUANG, N. E. (2009) · Advances in Adaptive Data Analysis · doi:10.1142/s1793536909000047 · Cited by 8,715
Convolutional Neural Network Based Fault Detection for Rotating Machinery
Janssens, O., Slavkovikj, V., Vervisch, B., Stockman, K., Loccufier, M., Verstockt, S., Van de Walle, R., & Van Hoecke, S. (2016) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.05.027 · Cited by 1,255
Immovilli, F., Bellini, A., Rubini, R., & Tassoni, C. (2010) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2010.2049623 · Cited by 382
Ebrahimi, B. M., Javan Roshtkhari, M., Faiz, J., & Khatami, S. V. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2013.2263777 · Cited by 271
Jalan, A. K., & Mohanty, A. R. (2009) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2009.07.014 · Cited by 269
New clustering algorithm-based fault diagnosis using compensation distance evaluation technique
Lei, Y., He, Z., Zi, Y., & Chen, X. (2008) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2007.07.013 · Cited by 244
Experimental investigations on vibration response of misaligned rotors
Patel, T. H., & Darpe, A. K. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2009.04.004 · Cited by 235
Wang, J., Peng, Y., & Qiao, W. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2571258 · Cited by 173
Incipient Bearing Fault Detection via Motor Stator Current Noise Cancellation Using Wiener Filter
Zhou, W., Lu, B., Habetler, T. G., & Harley, R. G. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2023566 · Cited by 165
Thermal error forecast and performance evaluation for an air-cooling ball screw system
Xu, Z., Liu, X. J., Kim, H. K., Shin, J. H., & Lyu, S.-K. (2011) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2011.04.001 · Cited by 163
Piotrowski, J. (2006) · CRC Press eBooks · doi:10.1201/9781420017878 · Cited by 148
Wavelet leaders multifractal features based fault diagnosis of rotating mechanism
Du, W., Tao, J., Li, Y., & Liu, C. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.09.003 · Cited by 140
Self-citationModelling and Vibration Analysis of Misaligned Rotor-Ball Bearing Systems
Lee, Y.-S., & Lee, C.-W. (1999) · Journal of Sound and Vibration · doi:10.1006/jsvi.1997.1301 · Cited by 136
Piotrowski, J., & Saunders, H. (1989) · Journal of vibration and acoustics · doi:10.1115/1.3269808 · Cited by 129
Kia, S. H., Henao, H., & Capolino, G. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2360068 · Cited by 118
Modern Diagnostics Techniques for Electrical Machines, Power Electronics, and Drives
Capolino, G., Daviu, J. A. A., & Riera‐Guasp, M. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2391186 · Cited by 109
Bellini, A., Immovilli, F., Rubini, R., & Tassoni, C. (2008) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/08ias.2008.26 · Cited by 102
Verucchi, C., Bossio, J. M., Bossio, G. R., & Acosta, G. G. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.04.035 · Cited by 101
Gibbons, C. B. (1976) · OakTrust (Texas A&M University Libraries) · doi:10.21423/r10t1x · Cited by 97
Zhang, J., Dhupia, J. S., & Gajanayake, C. J. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2410254 · Cited by 83
Cruz, S. M. A. (2012) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2011.2178027 · Cited by 83
Concari, C., Franceschini, G., & Tassoni, C. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.2003212 · Cited by 75
Yang, W., & Tavner, P. J. (2008) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2008.10.012 · Cited by 61
Sharma, V., & Parey, A. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.08.015 · Cited by 61
Nembhard, A. D., Sinha, J. K., & Yunusa‐Kaltungo, A. (2015) · Measurement · doi:10.1016/j.measurement.2015.08.007 · Cited by 50
A data-driven method to enhance vibration signal decomposition for rolling bearing fault analysis
Grasso, M., Chatterton, S., Pennacchi, P., & Colosimo, B. M. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.02.067 · Cited by 49
Jung, J. H., Jeon, B., Youn, B. D., Kim, M., Kim, D.-H., & Kim, Y.-W. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2016.12.030 · Cited by 43
Self-organizing map approach for classification of mechanical and rotor faults on induction motors
Bossio, J. M., Angelo, C. H. D., & Bossio, G. R. (2012) · Neural Computing and Applications · doi:10.1007/s00521-012-1255-0 · Cited by 21
Avendano, R. D., & Childs, D. W. (2013) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4023232 · Cited by 17
Cited by
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
Acoustic fault analysis of three commutator motors
Głowacz, A. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.07.007 · Cited by 94
Liu, Y., Zhao, Y., Li, J., Lü, H., & Ma, H. (2019) · Nonlinear Dynamics · doi:10.1007/s11071-019-05340-8 · Cited by 44
Cheng, J.-W., Bu, W., Shi, L., & Fu, J.-Q. (2023) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2023.110366 · Cited by 36
Local maximum synchrosqueezes from entropy matching chirplet transform
He, Y. D., Hu, M., Jiang, Z., Feng, K., & Ming, X. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2022.109476 · Cited by 32
Metadata
- Authors
- Yao, Y., Li, Y., & Yin, Q.
- Affiliations
- Huazhong University of Science and Technology (CN)
- Corresponding author
- Li, Yesong
- Venue
- Mechanical Systems and Signal Processing
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 116
- Pages
- 217-229
- ISSN
- 0888-3270 (ISSN-L)
- OpenAlex
- W2883551864
- Cited by
- 42
- References
- 29
- Citations by year
- 2026: 4 · 2025: 11 · 2024: 4 · 2023: 8 · 2022: 4 · 2021: 4 · 2020: 3 · 2019: 3
- FWCI
- 1.70
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- Mechanical Systems and Signal Processing (publishedVersion)
- Funders
- Ministry of Science and Technology of the People's Republic of China
- National Science and Technology Major Project
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electric Motor Design and Analysis
- Keywords
- misalignment detection, permanent magnet synchronous motor, field-oriented control, q-axis current, ball screw, sensorless fault diagnosis, electromechanical systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.