Fire spread prediction in shrub fuels in Portugal
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Expertise and knowledge of forest fire behaviour provide a sound basis to fire management activities. This study examines the possibility of describing fire spread in shrubland by means of a simple empirical model. Rates of fire spread up to 20 m min ˇ1 and the associated weather and fuel conditions were measured on a set of experimental and prescribed burns in four different shrub fuel types in Portugal. Shrubland fire spread in flat terrain could be accurately predicted in terms of wind speed, aerial dead fuel moisture content and vegetation height. However, it was not possible to identify individual effects of the fuel-complex descriptors on fire propagation. Preliminary fire spread models are presented but their use should be restricted to mild to moderate burning conditions until more extensive experimentation is carried out. # 2001 Elsevier Science B.V. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A mathematical model for predicting fire spread in wildland fuels
Rothermel, R. C. (1972) · doi:10.2737/int-rp-115 · Cited by 2,247 · cited 5×
“Bulk density was calculated as the ratio between fuel load and the fuel-complex volume (Rothermel, 1972).”
InfluentialHeight of Crown Scorch in Forest Fires
Wagner, C. E. V. (1973) · Canadian Journal of Forest Research · doi:10.1139/x73-055 · Cited by 349
Cited by
Wildland surface fire spread modelling, 1990–2007. 1: Physical and quasi-physical models
Sullivan, A. L. (2009) · International Journal of Wildland Fire · doi:10.1071/wf06143 · Cited by 474
Wildland surface fire spread modelling, 1990–2007. 2: Empirical and quasi-empirical models
Sullivan, A. L. (2009) · International Journal of Wildland Fire · doi:10.1071/wf06142 · Cited by 408
Modeling the propagation of a wildfire through a Mediterranean shrub using a multiphase formulation
Morvan, D., & Dupuy, J. L. (2004) · Combustion and Flame · doi:10.1016/j.combustflame.2004.05.001 · Cited by 267
Predicting fire behaviour in dry eucalypt forest in southern Australia
Cheney, N. P., Gould, J. S., McCaw, W. L., & Anderson, W. R. (2012) · Forest Ecology and Management · doi:10.1016/j.foreco.2012.06.012 · Cited by 216
“…277 3.2 Model form 278 Rate of spread in forest fuels depends on the initial growth of the fire, wind 279 speed, fine dead fuel moisture, and fuel attributes (Peet, 1965; McArthur, 1967; 280 Rothermel, 1972; Forestry Canada Fire Danger Rating Group, 1992; Burrows 1994, 281 1999; Fernandes, 2001).”
BackgroundInfluentialCollins, R. D., de Neufville, R., Claro, J., Oliveira, T., & Pacheco, A. P. (2013) · Journal of Environmental Management · doi:10.1016/j.jenvman.2013.08.033 · Cited by 184
Metadata
- Authors
- Martins Fernandes, P. A.
- Venue
- Forest Ecology and Management
- Publisher
- Elsevier BV
- Published
- 2001-04
- Volume
- 144
- Issue
- 1-3
- Pages
- 67-74
- ISSN
- 0378-1127 (ISSN-L)
- OpenAlex
- W2123680942
- Cited by
- 205
- References
- 2
- FWCI
- 3.98
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.