The DOI matches its Crossref record.
Microcontact Printing of DNA Molecules
Abstract
The controlled placement of DNA molecules onto solid surfaces is the first step in the fabrication of DNA arrays. The sequential deposition of tiny drops containing the probe DNA fragments using arrays of spotting needles or ink jet nozzles has become a standard. However, a caveat of liquid spotting is the drying of the deposited drop because this creates the typical inhomogeneities, i.e., rims around the spot. Another drawback is that each DNA array is an original and has to be fabricated individually. Microcontact printing is a versatile technique to place proteins onto different target surfaces in uniformly patterned monolayers with high lateral resolution. Here, we show for the first time that DNA can also be printed with equally high resolution in the submicrometer range using an elastomeric stamp with chemically tailored surface. Two regimes for the transfer of the molecules were observed. Finally, microcontact printing of an array of DNA probes onto a solid support and its use in a subsequent hybridization assay was demonstrated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
New Approaches to Nanofabrication: Molding, Printing, and Other Techniques
Gates, B. D., Xu, Q., Stewart, M., Ryan, D., Willson, C. G., & Whitesides, G. M. (2005) · Chemical Reviews · doi:10.1021/cr030076o · Cited by 2,020
Transfer Printing Techniques for Materials Assembly and Micro/Nanodevice Fabrication
Carlson, A., Bowen, A. M., Huang, Y., Nuzzo, R. G., & Rogers, J. A. (2012) · Advanced Materials · doi:10.1002/adma.201201386 · Cited by 917
Microcontact printing: A tool to pattern
Alom Ruiz, S., & Chen, C. S. (2007) · Soft Matter · doi:10.1039/b613349e · Cited by 528
Bio-Microarray Fabrication Techniques—A Review
Barbulovic-Nad, I., Lucente, M., Sun, Y., Zhang, M., Wheeler, A. R., & Bussmann, M. (2006) · Critical Reviews in Biotechnology · doi:10.1080/07388550600978358 · Cited by 376
Recent advances in microcontact printing
Quist, A. P., Pavlovic, E., & Oscarsson, S. (2005) · Analytical and Bioanalytical Chemistry · doi:10.1007/s00216-004-2847-z · Cited by 292
Polony gels enable amplifiable DNA stamping and spatial transcriptomics of chronic pain
Fu, X., Sun, L., Dong, R., Chen, J. Y., Silakit, R., Condon, L. F., Lin, Y., Lin, S., Palmiter, R. D., & Gu, L. (2022) · Cell · doi:10.1016/j.cell.2022.10.021 · Cited by 161
Biofunctionalization of Multiplexed Silicon Photonic Biosensors
Puumala, L. S., Grist, S. M., Morales, J. M., Bickford, J. R., Chrostowski, L., Shekhar, S., & Cheung, K. C. (2022) · Biosensors · doi:10.3390/bios13010053 · Cited by 55
Metadata
- Authors
- Lange, S. A., Benes, V., Kern, D. P., Hörber, J. K. H., & Bernard, A.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-02-13
- Volume
- 76
- Issue
- 6
- Pages
- 1641-1647
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W1967412781
- Cited by
- 212
- References
- 0
- FWCI
- 11.86
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.