The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Layered Oxide Cathodes for Sodium-Ion Batteries: Storage Mechanism, Electrochemistry, and Techno-economics
Open accessAbstract
High Resolution Image Download MS PowerPoint Slide Conspectus Lithium-ion batteries (LIBs) are ubiquitous in all modern portable electronic devices such as mobile phones and laptops as well as for powering hybrid electric vehicles and other large-scale devices. Sodium-ion batteries (NIBs), which possess a similar cell configuration and working mechanism, have already been proven as ideal alternatives for large-scale energy storage systems. The advantages of NIBs are as follows. First, sodium resources are abundantly distributed in the earth’s crust. Second, high-performance NIB cathode materials can be fabricated by using solely inexpensive and noncritical transition metals such as manganese and iron, which further reduces the cost of the required raw materials. Recently, the unprecedented demand for lithium and other critical minerals has driven the cost of these primary raw materials (which are utilized in LIBs) to a historic high and thus triggered the commercialization of NIBs. Sodium layered transition metal oxides (Na x TMO 2, TM = transition metal/s), such as Mn-based sodium layered oxides, represent an important family of cathode materials with the potential to reduce costs, increase energy density and cycling stability, and improve the safety of NIBs for large-scale energy storage. However, these layered oxides face several key challenges, including irreversible phase transformations during cycling, poor air stability, complex charge-compensation mechanisms, and relatively high cost of the full cell compared to LiFePO 4 -based LIBs. Our work has focused on the techno-economic analysis, the degradation mechanism of Na x TMO 2 upon cycling and air exposure, and the development of effective strategies to improve their electrochemical performances and air stability. Correlating structure–performance relationships and establishing general design strategies of Na x TMO 2 must be considered for the commercialization of NIBs. In this Account, we discuss the recent progress in the development of air-stable, electrochemically stable, and cost-effective Na x TMO 2 . The favorable redox-active cations for Na x TMO 2 are emphasized in terms of abundance, cost, supply, and energy density. Different working mechanisms related to Na x TMO 2 are summarized, including the electrochemical reversibility, the main structural transformations during the charge and discharge processes, and the charge-compensation mechanisms that accompany the (de)intercalation of Na + ions, followed by discussions to improve the stability toward ambient air and upon cycling. Then the techno-economics are presented, with an emphasis on cathodes with different chemical compositions, cost breakdown of battery packs, and Na deficiency, factors that are critical to the large-scale implementation. Finally, this Account concludes with an overview of the remaining challenges and new opportunities concerning the practical applications of Na x TMO 2, with an emphasis on the cost, large-scale fabrication capability, and electrochemical performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A cost and resource analysis of sodium-ion batteries
Vaalma, C., Buchholz, D., Weil, M., & Passerini, S. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.13 · Cited by 2,613
Self-citationFundamentals, status and promise of sodium-based batteries
Usiskin, R., Lu, Y., Popovic, J., Law, M., Balaya, P., Hu, Y.-S., & Maier, J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00324-w · Cited by 1,370
Duffner, F., Kronemeyer, N., Tübke, J., Leker, J., Winter, M., & Schmuch, R. (2021) · Nature Energy · doi:10.1038/s41560-020-00748-8 · Cited by 1,335
Prospects for reducing the processing cost of lithium ion batteries
Wood, D. L., Li, J., & Daniel, C. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.11.019 · Cited by 827
Recent progress on sodium ion batteries: potential high-performance anodes
Li, L., Zheng, Y., Zhang, S., Yang, J., Shao, Z., & Guo, Z. (2018) · Energy & Environmental Science · doi:10.1039/c8ee01023d · Cited by 740
Prototype Sodium‐Ion Batteries Using an Air‐Stable and Co/Ni‐Free O3‐Layered Metal Oxide Cathode
Mu, L., Xu, S., Li, Y., Hu, Y., Li, H., Chen, L., & Huang, X. (2015) · Advanced Materials · doi:10.1002/adma.201502449 · Cited by 704
Bresser, D., Buchholz, D., Moretti, A., Varzi, A., & Passerini, S. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00640g · Cited by 640
Self-citationLiu, Q., Hu, Z., Chen, M., Zou, C., Jin, H., Wang, S., Chou, S., Liu, Y., & Dou, S. X. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201909530 · Cited by 561
Na + /vacancy disordering promises high-rate Na-ion batteries
Wang, P., Yao, H., Liu, X., Yin, Y., Zhang, J., Wen, Y., Yu, X., Gu, L., & Guo, Y. (2018) · Science Advances · doi:10.1126/sciadv.aar6018 · Cited by 555
Greim, P., Solomon, A. A., & Breyer, C. (2020) · Nature Communications · doi:10.1038/s41467-020-18402-y · Cited by 554
The stability of P2-layered sodium transition metal oxides in ambient atmospheres
Zuo, W., Qiu, J., Liu, X., Ren, F., Liu, H., He, H., Luo, C., Li, J., Ortiz, G. F., Duan, H., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17290-6 · Cited by 487
Self-citationAll Organic Sodium‐Ion Batteries with Na4C8H2O6
Wang, S., Wang, L., Zhu, Z., Hu, Z., Zhao, Q., & Chen, J. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201400032 · Cited by 440
Zuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
Self-citationBoron-doped sodium layered oxide for reversible oxygen redox reaction in Na-ion battery cathodes
Guo, Y.-J., Wang, P.-F., Niu, Y.-B., Zhang, X.-D., Li, Q., Yu, X., Fan, M., Chen, W.-P., Yu, Y., Liu, X., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25610-7 · Cited by 422
Crystal Structures and Electrode Performance of Alpha-NaFeO2 for Rechargeable Sodium Batteries
YABUUCHI, N., YOSHIDA, H., & KOMABA, S. (2012) · Electrochemistry · doi:10.5796/electrochemistry.80.716 · Cited by 411
Engineering Na+-layer spacings to stabilize Mn-based layered cathodes for sodium-ion batteries
Zuo, W., Liu, X., Qiu, J., Zhang, D., Xiao, Z., Xie, J., Ren, F., Wang, J., Li, Y., Ortiz, G. F., et al. (2021) · Nature Communications · doi:10.1038/s41467-021-25074-9 · Cited by 343
Self-citationCommercialisation of high energy density sodium-ion batteries: Faradion's journey and outlook
Rudola, A., Rennie, A. J. R., Heap, R., Meysami, S. S., Lowbridge, A., Mazzali, F., Sayers, R., Wright, C. J., & Barker, J. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta00376c · Cited by 289
Lee, E., Brown, D. E., Alp, E. E., Ren, Y., Lu, J., Woo, J.-J., & Johnson, C. S. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b02918 · Cited by 256
Perez, A. J., Batuk, D., Saubanère, M., Rousse, G., Foix, D., McCalla, E., Berg, E. J., Dugas, R., H. W. van den Bos, K., Doublet, M.-L., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03338 · Cited by 193
Highly-stable P2–Na0.67MnO2 electrode enabled by lattice tailoring and surface engineering
Zuo, W., Qiu, J., Liu, X., Zheng, B., Zhao, Y., Li, J., He, H., Zhou, K., Xiao, Z., Li, Q., et al. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.11.024 · Cited by 170
Self-citationZheng, S., Zhong, G., McDonald, M. J., Gong, Z., Liu, R., Wen, W., Yang, C. C., & Yang, Y. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02230h · Cited by 135
Self-citationAir sensitivity of electrode materials in Li/Na ion batteries: Issues and strategies
Zhang, R., Yang, S., Li, H., Zhai, T., & Li, H. (2022) · InfoMat · doi:10.1002/inf2.12305 · Cited by 131
The re-emergence of sodium ion batteries: testing, processing, and manufacturability
Roberts, S. C., & Kendrick, E. (2018) · Nanotechnology Science and Applications · doi:10.2147/nsa.s146365 · Cited by 128
Insights of the anionic redox in P2–Na0.67Ni0.33Mn0.67O2
Zuo, W., Ren, F., Li, Q., Wu, X., Fang, F. Y., Yu, X., Li, H., & Yang, Y. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105285 · Cited by 116
Self-citationNelson, P. A., Vehicle Technologies Office (EE-3V) USDOE Office of Energy Efficiency and Renewable Energy (EERE), Ahmed, S., Gallagher, K. G., & Dees, D. W. (2019) · doi:10.2172/1503280 · Cited by 111
Liu, X., Zhong, G., Xiao, Z., Zheng, B., Zuo, W., Zhou, K. C., Liu, H., Liang, Z., Xiang, Y., Chen, Z., et al. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104997 · Cited by 107
Self-citationChagas, L. G., Jeong, S., Hasa, I., & Passerini, S. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03813 · Cited by 91
Self-citationGonzalo, E. C., Zarrabeitia, M., Drewett, N. E., del Amo, J. M. L., & Rojo, T. (2020) · Energy storage materials · doi:10.1016/j.ensm.2020.10.010 · Cited by 88
Self-citationGuidelines for Air-Stable Lithium/Sodium Layered Oxide Cathodes
Zuo, W., Xiao, Z., Zarrabeitia, M., Xue, X., Yang, Y., & Passerini, S. (2022) · ACS Materials Letters · doi:10.1021/acsmaterialslett.1c00827 · Cited by 88
Self-citationWentker, M., Greenwood, M., Asaba, M. C., & Leker, J. (2019) · Journal of Energy Storage · doi:10.1016/j.est.2019.101022 · Cited by 85
Yoda, Y., Kubota, K., Isozumi, H., Horiba, T., & Komaba, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01362 · Cited by 75
Transport studies of NaPF6 carbonate solvents-based sodium ion electrolytes
Morales, D., Chagas, L. G., Paterno, D., Greenbaum, S., Passerini, S., & Suarez, S. N. (2021) · Electrochimica Acta · doi:10.1016/j.electacta.2021.138062 · Cited by 68
Self-citationZuo, W., Qiu, J., Hong, C., Liu, X., Li, J., Ortiz, G. F., Li, Q., Zheng, S., Zheng, G. R., & Yang, Y. (2019) · ACS Applied Energy Materials · doi:10.1021/acsaem.9b00614 · Cited by 67
Self-citationToward Stable Electrode/Electrolyte Interface of P2-Layered Oxide for Rechargeable Na-Ion Batteries
Zarrabeitia, M., Chagas, L. G., Kuenzel, M., Gonzalo, E. C., Rojo, T., Passerini, S., & Muñoz‐Márquez, M. Á. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b07963 · Cited by 48
Self-citationMoon, H., Zarrabeitia, M., Frank, E., Böse, O., Enterría, M., Saurel, D., Hasa, I., & Passerini, S. (2021) · Batteries & Supercaps · doi:10.1002/batt.202000322 · Cited by 45
Self-citation
Cited by
Challenges and Prospects of Sodium‐Ion and Potassium‐Ion Batteries for Mass Production
Sada, K., Darga, J., & Manthiram, A. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202302321 · Cited by 308
Metadata
- Authors
- Zuo, W., Innocenti, A., Zarrabeitia, M., Bresser, D., Yang, Y., & Passerini, S.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2023-01-25
- Volume
- 56
- Issue
- 3
- Pages
- 284-296
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W4318023107
- Cited by
- 451
- References
- 35
- FWCI
- 33.06
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.