The DOI matches its Crossref record; 43 of the 43 references it cites were found in a registry or an index.
Recent Advances in the Inverted Planar Structure of Perovskite Solar Cells
Abstract
Inorganic-organic hybrid perovskite solar cells research could be traced back to 2009, and initially showed 3.8% efficiency. After 6 years of efforts, the efficiency has been pushed to 20.1%. The pace of development was much faster than that of any type of solar cell technology. In addition to high efficiency, the device fabrication is a low-cost solution process. Due to these advantages, a large number of scientists have been immersed into this promising area. In the past 6 years, much of the research on perovskite solar cells has been focused on planar and mesoporous device structures employing an n-type TiO2 layer as the bottom electron transport layer. These architectures have achieved champion device efficiencies. However, they still possess unwanted features. Mesoporous structures require a high temperature (>450 °C) sintering process for the TiO2 scaffold, which will increase the cost and also not be compatible with flexible substrates. While the planar structures based on TiO2 (regular structure) usually suffer from a large degree of J-V hysteresis. Recently, another emerging structure, referred to as an "inverted" planar device structure (i.e., p-i-n), uses p-type and n-type materials as bottom and top charge transport layers, respectively. This structure derived from organic solar cells, and the charge transport layers used in organic photovoltaics were successfully transferred into perovskite solar cells. The p-i-n structure of perovskite solar cells has shown efficiencies as high as 18%, lower temperature processing, flexibility, and, furthermore, negligible J-V hysteresis effects. In this Account, we will provide a comprehensive comparison of the mesoporous and planar structures, and also the regular and inverted of planar structures. Later, we will focus the discussion on the development of the inverted planar structure of perovskite solar cells, including film growth, band alignment, stability, and hysteresis. In the film growth part, several methods for obtaining high quality perovskite films are reviewed. In the interface engineering parts, the effect of hole transport layer on subsequent perovskite film growth and their interface band alignment, and also the effect of electron transport layers on charge transport and interface contact will be discussed. As concerns stability, the role of charge transport layers especially the top electron transport layer in the devices stability will be concluded. In the hysteresis part, possible reasons for hysteresis free in inverted planar structure are provided. At the end of this Account, future development and possible solutions to the remaining challenges facing the commercialization of perovskite solar cells are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Efficient planar heterojunction perovskite solar cells by vapour deposition
Liu, M., Johnston, M. B., & Snaith, H. J. (2013) · Nature · doi:10.1038/nature12509 · Cited by 7,976
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Self-citationCompositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
Metal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392
High-efficiency solution-processed perovskite solar cells with millimeter-scale grains
Nie, W., Tsai, H., Asadpour, R., Blancon, J.-C., Neukirch, A. J., Gupta, G., Crochet, J. J., Chhowalla, M., Tretiak, S., Alam, M. A., et al. (2015) · Science · doi:10.1126/science.aaa0472 · Cited by 3,295
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Shao, Y., Xiao, Z., Bi, C., Yuan, Y., & Huang, J. (2014) · Nature Communications · doi:10.1038/ncomms6784 · Cited by 3,025
Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers
You, J., Meng, L., Song, T.-B., Guo, T.-F., Yang, Y. (., Chang, W.-H., Hong, Z., Chen, H., Zhou, H., Chen, Q., et al. (2016) · Nature Nanotechnology · doi:10.1038/nnano.2015.230 · Cited by 2,123
Self-citationA Layered Hybrid Perovskite Solar‐Cell Absorber with Enhanced Moisture Stability
Smith, I. C., Hoke, E. T., Solis‐Ibarra, D., McGehee, M. D., & Karunadasa, H. I. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201406466 · Cited by 2,011
Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells
Im, J.-H., Jang, I.-H., Pellet, N., Grätzel, M., & Park, N.-G. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.181 · Cited by 1,759
Electro-optics of perovskite solar cells
Lin, Q., Armin, A., Nagiri, R. C. R., Burn, P. L., & Meredith, P. (2015) · Nature Photonics · doi:10.1038/nphoton.2014.284 · Cited by 1,749
Docampo, P., Ball, J. M., Darwich, M., Eperon, G. E., & Snaith, H. J. (2013) · Nature Communications · doi:10.1038/ncomms3761 · Cited by 1,703
Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660
CH3NH3PbI3 Perovskite/Fullerene Planar‐Heterojunction Hybrid Solar Cells
Jeng, J., Chiang, Y., Lee, M., Peng, S., Guo, T., Chen, P., & Wen, T. (2013) · Advanced Materials · doi:10.1002/adma.201301327 · Cited by 1,572
Self-citationPerovskite solar cells employing organic charge-transport layers
Malinkiewicz, O., Yella, A., Lee, Y. H., Espallargas, G. M., Graetzel, M., Nazeeruddin, M. K., & Bolink, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.341 · Cited by 1,474
Low-Temperature Solution-Processed Perovskite Solar Cells with High Efficiency and Flexibility
You, J., Hong, Z., Yang, Y. (., Chen, Q., Cai, M., Song, T.-B., Chen, C.-C., Lu, S., Liu, Y., Zhou, H., et al. (2014) · ACS Nano · doi:10.1021/nn406020d · Cited by 1,448
Self-citationHalide perovskite materials for solar cells: a theoretical review
Yin, W.-J., Yang, J.-H., Kang, J., Yan, Y., & Wei, S.-H. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05033a · Cited by 1,437
Xiao, Z., Bi, C., Shao, Y., Dong, Q., Wang, Q., Yuan, Y., Wang, C., Gao, Y., & Huang, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01138d · Cited by 1,234
Heo, J. H., Han, H. J., Kim, D., Ahn, T. K., & Im, S. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00120j · Cited by 1,187
Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes
Xu, J., Buin, A., Ip, A. H., Li, W., Voznyy, O., Comin, R., Yuan, M., Jeon, S., Ning, Z., McDowell, J. J., et al. (2015) · Nature Communications · doi:10.1038/ncomms8081 · Cited by 1,124
Sun, S., Salim, T., Mathews, N., Duchamp, M., Boothroyd, C., Xing, G., Sum, T. C., & Lam, Y. M. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43161d · Cited by 1,109
Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency
Qin, P., Tanaka, S., Ito, S., Tetreault, N., Manabe, K., Nishino, H., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Communications · doi:10.1038/ncomms4834 · Cited by 894
Kim, J. H., Liang, P., Williams, S. T., Cho, N., Chueh, C., Glaz, M. S., Ginger, D. S., & Jen, A. K. ‐. (2015) · Advanced Materials · doi:10.1002/adma.201404189 · Cited by 833
Moisture assisted perovskite film growth for high performance solar cells
You, J., Yang, Y. (., Hong, Z., Song, T.-B., Meng, L., Liu, Y., Jiang, C., Zhou, H., Chang, W.-H., Li, G., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4901510 · Cited by 786
Self-citationJeng, J., Chen, K., Chiang, T., Lin, P., Tsai, T., Chang, Y., Guo, T., Chen, P., Wen, T., & Hsu, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306217 · Cited by 710
Self-citationBenefits of very thin PCBM and LiF layers for solution-processed p–i–n perovskite solar cells
Seo, J., Park, S., Chan Kim, Y., Jeon, N. J., Noh, J. H., Yoon, S. C., & Seok, S. I. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01216j · Cited by 677
CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%
Ye, S., Sun, W., Li, Y., Yan, W., Peng, H., Bian, Z., Liu, Z., & Huang, C. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00116 · Cited by 564
Park, J. H., Seo, J., Park, S., Shin, S. S., Kim, Y. C., Jeon, N. J., Shin, H., Ahn, T. K., Noh, J. H., Yoon, S. C., et al. (2015) · Advanced Materials · doi:10.1002/adma.201500523 · Cited by 550
Kuang, C., Tang, G., Jiu, T., Yang, H., Liu, H., Li, B., Luo, W., Li, X., Zhang, W., Lu, F., et al. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00787 · Cited by 376
Liang, P., Chueh, C., Williams, S. T., & Jen, A. K. ‐. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201402321 · Cited by 353
Hybrid interfacial layer leads to solid performance improvement of inverted perovskite solar cells
Chen, W., Wu, Y., Liu, J., Qin, C., Yang, X., Islam, A., Cheng, Y.-B., & Han, L. (2015) · Energy & Environmental Science · doi:10.1039/c4ee02833c · Cited by 319
Bai, S., Wu, Z., Wu, X., Jin, Y., Zhao, N., Chen, Z., Mei, Q., Wang, X., Ye, Z., Song, T., et al. (2014) · Nano Research · doi:10.1007/s12274-014-0534-8 · Cited by 235
Li, X., Liu, X., Wang, X., Zhao, L., Jiu, T., & Fang, J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta04712a · Cited by 128
Cited by
Jiang, Q., Zhang, L., Wang, H., Yang, X., Meng, J., Liu, H., Yin, Z., Wu, J., Zhang, X., & You, J. (2016) · Nature Energy · doi:10.1038/nenergy.2016.177 · Cited by 2,024
Self-citationYang, D., Yang, R., Wang, K., Wu, C., Zhu, X., Feng, J., Ren, X., Fang, G., Priya, S., & Liu, S. (2018) · Nature Communications · doi:10.1038/s41467-018-05760-x · Cited by 1,401
Mesoporous materials for energy conversion and storage devices
Li, W., Liu, J., & Zhao, D. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.23 · Cited by 1,388
Ultra-bright and highly efficient inorganic based perovskite light-emitting diodes
Zhang, L., Yang, X., Jiang, Q., Wang, P., Yin, Z., Zhang, X., Tan, H., Yang, Y., Wei, M., Sutherland, B. R., et al. (2017) · Nature Communications · doi:10.1038/ncomms15640 · Cited by 857
Self-citationWu, Y., Yang, X., Chen, W., Yue, Y., Cai, M., Xie, F., Bi, E., Islam, A., & Han, L. (2016) · Nature Energy · doi:10.1038/nenergy.2016.148 · Cited by 644
Metadata
- Authors
- Meng, L., You, J., Guo, T.-F., & Yang, Y.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-22
- Volume
- 49
- Issue
- 1
- Pages
- 155-165
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2234530713
- Cited by
- 659
- References
- 43
- FWCI
- 39.29
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.