The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Making and Breaking of Lead Halide Perovskites
Open accessAbstract
A new front-runner has emerged in the field of next-generation photovoltaics. A unique class of materials, known as organic metal halide perovskites, bridges the gap between low-cost fabrication and exceptional device performance. These compounds can be processed at low temperature (typically in the range 80-150 °C) and readily self-assemble from the solution phase into high-quality semiconductor thin films. The low energetic barrier for crystal formation has mixed consequences. On one hand, it enables inexpensive processing and both optical and electronic tunability. The caveat, however, is that many as-formed lead halide perovskite thin films lack chemical and structural stability, undergoing rapid degradation in the presence of moisture or heat. To date, improvements in perovskite solar cell efficiency have resulted primarily from better control over thin film morphology, manipulation of the stoichiometry and chemistry of lead halide and alkylammonium halide precursors, and the choice of solvent treatment. Proper characterization and tuning of processing parameters can aid in rational optimization of perovskite devices. Likewise, gaining a comprehensive understanding of the degradation mechanism and identifying components of the perovskite structure that may be particularly susceptible to attack by moisture are vital to mitigate device degradation under operating conditions. This Account provides insight into the lifecycle of organic-inorganic lead halide perovskites, including (i) the nature of the precursor solution, (ii) formation of solid-state perovskite thin films and single crystals, and (iii) transformation of perovskites into hydrated phases upon exposure to moisture. In particular, spectroscopic and structural characterization techniques shed light on the thermally driven evolution of the perovskite structure. By tuning precursor stoichiometry and chemistry, and thus the lead halide charge-transfer complexes present in solution, crystallization kinetics can be tailored to yield improved thin film homogeneity. Because degradation of the as-formed perovskite film is in many ways analogous to its initial formation, the same suite of monitoring techniques reveals the moisture-induced transformation of low band gap methylammonium lead iodide (CH3NH3PbI3) to wide band gap hydrate compounds. The rate of degradation is increased upon exposure to light. Interestingly, the hydration process is reversible under certain conditions. This facile formation and subsequent chemical lability raises the question of whether CH3NH3PbI3 and its analogues are thermodynamically stable phases, thus posing a significant challenge to the development of transformative perovskite photovoltaics. Adequately addressing issues of structural and chemical stability under real-world operating conditions is paramount if perovskite solar cells are to make an impact beyond the benchtop. Expanding our fundamental knowledge of lead halide perovskite formation and degradation pathways can facilitate fabrication of stable, high-quality perovskite thin films for the next generation of photovoltaic and light emitting devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Electron-hole diffusion lengths > 175 μm in solution-grown CH 3 NH 3 PbI 3 single crystals
Dong, Q., Fang, Y., Shao, Y., Mulligan, P., Qiu, J., Cao, L., & Huang, J. (2015) · Science · doi:10.1126/science.aaa5760 · Cited by 5,643
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Self-citationNoh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Ahn, N., Son, D.-Y., Jang, I.-H., Kang, S. M., Choi, M., & Park, N.-G. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b04930 · Cited by 2,312
Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics
Hoke, E. T., Slotcavage, D. J., Dohner, E. R., Bowring, A. R., Karunadasa, H. I., & McGehee, M. D. (2015) · Chemical Science · doi:10.1039/c4sc03141e · Cited by 2,295
Cited by
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Intriguing Optoelectronic Properties of Metal Halide Perovskites
Manser, J. S., Christians, J. A., & Kamat, P. V. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00136 · Cited by 2,020
Self-citationScalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
Lead-Free Halide Double Perovskites via Heterovalent Substitution of Noble Metals
Volonakis, G., Filip, M. R., Haghighirad, A. A., Sakai, N., Wenger, B., Snaith, H. J., & Giustino, F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00376 · Cited by 1,146
The rapid evolution of highly efficient perovskite solar cells
Correa-Baena, J.-P., Abate, A., Saliba, M., Tress, W., Jesper Jacobsson, T., Grätzel, M., & Hagfeldt, A. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03397k · Cited by 1,140
All-Inorganic Perovskite Solar Cells
Liang, J., Wang, C., Wang, Y., Xu, Z., Lu, Z., Ma, Y., Zhu, H., Hu, Y., Xiao, C., Yi, X., et al. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b10227 · Cited by 1,089
Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability
Christians, J. A., Schulz, P., Tinkham, J. S., Schloemer, T. H., Harvey, S. P., Tremolet de Villers, B. J., Sellinger, A., Berry, J. J., & Luther, J. M. (2018) · Nature Energy · doi:10.1038/s41560-017-0067-y · Cited by 828
Self-citationPresent status and future prospects of perovskite photovoltaics
Snaith, H. J. (2018) · Nature Materials · doi:10.1038/s41563-018-0071-z · Cited by 803
Efficient tandem solar cells with solution-processed perovskite on textured crystalline silicon
Hou, Y., Aydin, E., De Bastiani, M., Xiao, C., Isikgor, F. H., Xue, D.-J., Chen, B., Chen, H., Bahrami, B., Chowdhury, A. H., et al. (2020) · Science · doi:10.1126/science.aaz3691 · Cited by 789
Self-citationFilip, M. R., Hillman, S., Haghighirad, A. A., Snaith, H. J., & Giustino, F. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b01041 · Cited by 750
Light-Induced Anion Phase Segregation in Mixed Halide Perovskites
Brennan, M. C., Draguta, S., Kamat, P. V., & Kuno, M. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01151 · Cited by 643
Self-citationSolar-Driven Metal Halide Perovskite Photocatalysis: Design, Stability, and Performance
Huang, H., Pradhan, B., Hofkens, J., Roeffaers, M. B. J., & Steele, J. A. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00058 · Cited by 613
Stability of Perovskite Solar Cells: A Prospective on the Substitution of the A Cation and X Anion
Wang, Z., Shi, Z., Li, T., Chen, Y., & Huang, W. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201603694 · Cited by 595
The renaissance of hydrides as energy materials
Mohtadi, R., & Orimo, S.-I. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.91 · Cited by 508
Impact of H2O on organic–inorganic hybrid perovskite solar cells
Huang, J., Tan, S., Lund, P. D., & Zhou, H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01674c · Cited by 489
Recent advances in perovskite solar cells: efficiency, stability and lead-free perovskite
Yang, S., Fu, W., Zhang, Z., Chen, H., & Li, C.-Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00366h · Cited by 486
Low-Dimensional-Networked Metal Halide Perovskites: The Next Big Thing
Saidaminov, M. I., Mohammed, O. F., & Bakr, O. M. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00705 · Cited by 476
Self-citationSaidaminov, M. I., Haque, M. A., Almutlaq, J., Sarmah, S., Miao, X., Begum, R., Zhumekenov, A. A., Dursun, I., Cho, N., Murali, B., et al. (2017) · Advanced Optical Materials · doi:10.1002/adom.201600704 · Cited by 472
Self-citationZeng, Q., Zhang, X., Feng, X., Lu, S., Chen, Z., Yong, X., Redfern, S. A. T., Wei, H., Wang, H., Shen, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705393 · Cited by 464
Leguy, A. M. A., Goñi, A. R., Frost, J. M., Skelton, J., Brivio, F., Rodríguez-Martínez, X., Weber, O. J., Pallipurath, A., Alonso, M. I., Campoy-Quiles, M., et al. (2016) · Physical Chemistry Chemical Physics · doi:10.1039/c6cp03474h · Cited by 459
Influence of Solvent Coordination on Hybrid Organic–Inorganic Perovskite Formation
Hamill, J. C., Schwartz, J., & Loo, Y.-L. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01057 · Cited by 451
Rajagopal, A., Yao, K., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201800455 · Cited by 429
Tracking Iodide and Bromide Ion Segregation in Mixed Halide Lead Perovskites during Photoirradiation
Yoon, S. J., Draguta, S., Manser, J. S., Sharia, O., Schneider, W. F., Kuno, M., & Kamat, P. V. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00158 · Cited by 419
Self-citationInterface Engineering for Highly Efficient and Stable Planar p‐i‐n Perovskite Solar Cells
Bai, Y., Meng, X., & Yang, S. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701883 · Cited by 418
Direct calorimetric verification of thermodynamic instability of lead halide hybrid perovskites
Nagabhushana, G. P., Shivaramaiah, R., & Navrotsky, A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1607850113 · Cited by 415
Solution-Grown CsPbBr3 Perovskite Single Crystals for Photon Detection
Dirin, D. N., Cherniukh, I., Yakunin, S., Shynkarenko, Y., & Kovalenko, M. V. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b04298 · Cited by 394
Zhao, T., Chueh, C.-C., Chen, Q., Rajagopal, A., & Jen, A. K.-Y. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00327 · Cited by 383
Ibn-Mohammed, T., Koh, S. C. L., Reaney, I. M., Acquaye, A., Schileo, G., Mustapha, K. B., & Greenough, R. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.095 · Cited by 379
Miah, M. H., Khandaker, M. U., Rahman, M. B., Nur-E-Alam, M., & Islam, M. A. (2024) · RSC Advances · doi:10.1039/d4ra01640h · Cited by 349
Zero-Dimensional Cs4PbBr6 Perovskite Nanocrystals
Zhang, Y., Saidaminov, M. I., Dursun, I., Yang, H., Murali, B., Alarousu, E., Yengel, E., Alshankiti, B. A., Bakr, O. M., & Mohammed, O. F. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00105 · Cited by 348
Self-citationMixed Dimensional 2D/3D Hybrid Perovskite Absorbers: The Future of Perovskite Solar Cells?
Krishna, A., Gottis, S., Nazeeruddin, M. K., & Sauvage, F. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806482 · Cited by 345
Low‐Dimensional Organic Tin Bromide Perovskites and Their Photoinduced Structural Transformation
Zhou, C., Tian, Y., Wang, M., Rose, A., Besara, T., Doyle, N. K., Yuan, Z., Wang, J. C., Clark, R., Hu, Y., et al. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201702825 · Cited by 329
Is Cu a stable electrode material in hybrid perovskite solar cells for a 30-year lifetime?
Zhao, J., Zheng, X., Deng, Y., Li, T., Shao, Y., Gruverman, A., Shield, J., & Huang, J. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02980a · Cited by 303
Waleed, A., Tavakoli, M. M., Gu, L., Wang, Z., Zhang, D., Manikandan, A., Zhang, Q., Zhang, R., Chueh, Y.-L., & Fan, Z. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04587 · Cited by 295
Phase Transition Control for High Performance Ruddlesden–Popper Perovskite Solar Cells
Zhang, X., Munir, R., Xu, Z., Liu, Y., Tsai, H., Nie, W., Li, J., Niu, T., Smilgies, D., Kanatzidis, M. G., et al. (2018) · Advanced Materials · doi:10.1002/adma.201707166 · Cited by 294
Nagaoka, Y., Hills‐Kimball, K., Tan, R., Li, R., Wang, Z., & Chen, O. (2017) · Advanced Materials · doi:10.1002/adma.201606666 · Cited by 291
Low-temperature carbon-based electrodes in perovskite solar cells
Bogachuk, D., Zouhair, S., Wojciechowski, K., Yang, B., Babu, V., Wagner, L., Xu, B., Lim, J., Mastroianni, S., Pettersson, H., et al. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02175j · Cited by 268
On the Thermal and Thermodynamic (In)Stability of Methylammonium Lead Halide Perovskites
Brunetti, B., Cavallo, C., Ciccioli, A., Gigli, G., & Latini, A. (2016) · Scientific Reports · doi:10.1038/srep31896 · Cited by 268
Zhu, Z., Chueh, C., Li, N., Mao, C., & Jen, A. K. ‐. (2018) · Advanced Materials · doi:10.1002/adma.201703800 · Cited by 267
Solution-processed perovskite thin-films: the journey from lab- to large-scale solar cells
Saki, Z., Byranvand, M. M., Taghavinia, N., Kedia, M., & Saliba, M. (2021) · Energy & Environmental Science · doi:10.1039/d1ee02018h · Cited by 263
Liang, L., Luo, H., Hu, J., Li, H., & Gao, P. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000197 · Cited by 260
How Lead Halide Complex Chemistry Dictates the Composition of Mixed Halide Perovskites
Yoon, S. J., Stamplecoskie, K. G., & Kamat, P. V. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00433 · Cited by 254
Self-citationMai, H., Chen, D., Tachibana, Y., Suzuki, H., Abe, R., & Caruso, R. A. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00684c · Cited by 254
Understanding Detrimental and Beneficial Grain Boundary Effects in Halide Perovskites
Adhyaksa, G. W. P., Brittman, S., Āboliņš, H., Lof, A., Li, X., Keelor, J. D., Luo, Y., Duevski, T., Heeren, R. M. A., Ellis, S. R., et al. (2018) · Advanced Materials · doi:10.1002/adma.201804792 · Cited by 197
Highly Reproducible Organometallic Halide Perovskite Microdevices based on Top‐Down Lithography
Zhang, N., Sun, W., Rodrigues, S. P., Wang, K., Gu, Z., Wang, S., Cai, W., Xiao, S., & Song, Q. (2017) · Advanced Materials · doi:10.1002/adma.201606205 · Cited by 176
Qiu, M., Li, W., Luo, Y., Zhao, C., Zhao, Z., & Mai, W. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202418064 · Cited by 15
Metadata
- Authors
- Manser, J. S., Saidaminov, M. I., Christians, J. A., Bakr, O. M., & Kamat, P. V.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-01-20
- Volume
- 49
- Issue
- 2
- Pages
- 330-338
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2337643623
- Cited by
- 727
- References
- 45
- FWCI
- 51.83
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.