Fabrication Method for Laboratory-Scale High-Performance Membrane Electrode Assemblies for Fuel Cells
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
) fuel cells based on ultrasonic spray deposition of a standard Pt/carbon electrocatalyst directly onto a perfluorosulfonic acid PEM.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“spray coating usually needs a lower catalyst content (the solid concentration is commonly less than 3 wt.%,e.g., ~0.6 wt.% [36], ~1.8 wt.% [104], or 2.5 wt.% [67]) to avoid the blockage of spraying nozzle”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [104]
In the citing paper
“While the thickness and porosity are independent of the ultrasonic nozzle height, the CL surface may crack when the distance between the nozzle and substrate is too short (e.g., 3.5 cm) due to the presence of excess liquid ink on the substrate [104].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [104]
In the citing paper
“To form a fine ink mist with well-defined droplets size, ultrasonic spray and electrospray were developed [104,162,163].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [104]
In the citing paper
“During spray coating, some spraying parameters influence the morphology and structure of the CL and hence the performance of the cell, such as the nozzle height [104], electrospray mode [67], or spraying voltage [163].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [104]
Citations
Cites
Recent Advances in Electrocatalysts for Oxygen Reduction Reaction
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00462 · Cited by 3,903
Handbook of fuel cells: fundamentals, technology, and applications
(2003) · Focus on Catalysts · doi:10.1016/s1351-4180(03)00850-x · Cited by 3,324
Garsany, Y., Baturina, O. A., Swider-Lyons, K. E., & Kocha, S. S. (2010) · Analytical Chemistry · doi:10.1021/ac100306c · Cited by 703
Self-citationPark, Y.-C., Tokiwa, H., Kakinuma, K., Watanabe, M., & Uchida, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.091 · Cited by 389
Advanced Redox-Flow Batteries: A Perspective
Perry, M. L., & Weber, A. Z. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0101601jes · Cited by 330
Low Pt loading high performance cathodes for PEM fuel cells
Qi, Z., & Kaufman, A. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00477-9 · Cited by 273
Wright, A. G., Fan, J., Britton, B., Weissbach, T., Lee, H.-F., Kitching, E. A., Peckham, T. J., & Holdcroft, S. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00656f · Cited by 271
Shinozaki, K., Zack, J. W., Pylypenko, S., Pivovar, B. S., & Kocha, S. S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0551512jes · Cited by 254
Dependence of optimum Nafion content in catalyst layer on platinum loading
Sasikumar, G., Ihm, J. W., & Ryu, H. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.060 · Cited by 244
Impact of film drying procedures on RDE characterization of Pt/VC electrocatalysts
Garsany, Y., Singer, I. L., & Swider-Lyons, K. E. (2011) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2011.09.016 · Cited by 224
Self-citation
Research works printed but not linked: 1
- St-Pierre J., 2016, Springer Handbook of Electrochemical Energy, 611
Cited by
Items 101–153 of 153
High performing platinum—copper catalyst for self—breathing polymer electrolyte membrane fuel cell
Sapkota, P., Boyer, C. A., Lim, S., & Aguey‐Zinsou, K. (2022) · Research on Chemical Intermediates · doi:10.1007/s11164-022-04734-5 · Cited by 8
Yang, Z., Chen, M., Fang, B., & Liu, G. (2020) · Nanomaterials · doi:10.3390/nano10122412 · Cited by 8
Huang, L., & Qi, R. (2022) · International Journal of Green Energy · doi:10.1080/15435075.2022.2126942 · Cited by 7
“reported a reproducible method by which to load a Pt/C electrocatalyst directly onto a PEM for laboratory-scale (10 cm(2)) fuel cell fabrication based on an ultrasonic spraying method (Sassin et al. 2017).”
BackgroundMethodChoi, J., Kyeong, M., Kim, M., Lee, S., Seo, B., Seo, B., Park, H. S., Henkensmeier, D., Lee, S. Y., & Kim, H. (2021) · Polymers · doi:10.3390/polym13111713 · Cited by 8
Kim, C. S., Jung, J., Jang, J. H., Kim, H., Park, H. S., Kang, J. W., Na, Y., & Park, H. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.05.154 · Cited by 7
Zhang, C., Hu, K., Liu, X., Qu, Y., Luo, L., Sun, X., Zhuang, Z., & Li, H. (2024) · Langmuir · doi:10.1021/acs.langmuir.4c01097 · Cited by 9
Jung, J., Park, H. S., Han, J., Kim, H., Henkensmeier, D., Yoo, S. J., Kim, J. Y., Lee, S. Y., Song, K. H., Park, H.-Y., et al. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.03.053 · Cited by 6
Zhao, Q., Morawietz, T., Gazdzicki, P., & Friedrich, K. A. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235624 · Cited by 6
Hosseinabadi, P., Javanbakht, M., Naji, L., & Ghafarian-Zahmatkesh, H. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b03647 · Cited by 6
Mansor, M., Paad, K. M., Zainoodin, A. M., Jusoh, N. W. C., Yamanaka, S., & Lenggoro, I. W. (2025) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2025.05.041 · Cited by 5
Reshetenko, T. V., & Kulikovsky, A. A. (2025) · Electrochimica Acta · doi:10.1016/j.electacta.2025.147529 · Cited by 5
Zhao, X., Gao, S., Wang, S., Hou, T., Bao, Z., Guo, W. F., Deng, C., Kong, F., & Yin, G. (2025) · ACS Catalysis · doi:10.1021/acscatal.5c03319 · Cited by 5
Xuan, L., Mei, D., Zhou, C., Mao, W., & Wang, Y. (2024) · Industrial Chemistry and Materials · doi:10.1039/d4im00008k · Cited by 4
Qiao, K., Liu, H., Ren, K., Sun, P., Liu, Y., Wang, S., & Cao, D. (2023) · Sustainable Energy & Fuels · doi:10.1039/d2se01675c · Cited by 4
Lim, K. H., Hwang, J., Kim, O., Kim, J., Kim, H., Henkensmeier, D., Yoo, S. J., Kim, J. Y., Lee, S. Y., Yoon, Y., et al. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.237063 · Cited by 4
Swider‐Lyons, K. E., Hjelm, R. M. E., Garsany, Y., Lafforgue, C., & Chatenet, M. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/abcbb1 · Cited by 4
Self-citationThe effect of catalyst ink formulations and slot-die coating parameters on PEMFC GDE fabrication
Felix, C., Vazirgiantzikis, I., Matseke, M. S., Barron, O., & Raphulu, M. C. (2025) · Next Energy · doi:10.1016/j.nxener.2025.100334 · Cited by 4
Li, S., Ye, D., Li, J., Zhang, L., Huang, J., Zhu, X., Yang, Y., & Liao, Q. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.150753 · Cited by 3
Han, L., Gong, X. Q., Wang, Y., Wang, D., Ru, C., Wang, X., Guo, D., Liu, F., Sheng, X., & Ge, J. (2025) · Chinese Chemical Letters · doi:10.1016/j.cclet.2025.111432 · Cited by 3
Proton Exchange Membranes Versus Anion Exchange Membranes
Xavier, M. M., & Mathew, S. (2024) · Wiley eBooks · doi:10.1002/9783527837588.ch5 · Cited by 3
Riasse, R., Rosini, S., & Micoud, F. (2026) · Journal of Applied Electrochemistry · doi:10.1007/s10800-025-02429-4 · Cited by 2
“One step closer is the single cell level, at which many different studies on the membrane or GDL nature and thick - ness, ionomer, active layer catalyst loadings have been investigated, each bringing fruitful knowledge on the field [16–22].”
Zekri, M., Pedicini, R., Saccà, A., Patti, A., D’Agostino, R., Librizzi, F., Carbone, A., Baglio, V., & Gatto, I. (2026) · Electrochimica Acta · doi:10.1016/j.electacta.2026.148519 · Cited by 2
Components, principles, and design strategies of membrane electrode assembly
Yang, W. M., Zhou, Y., Zhang, L., & Li, J. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-24062-1.00005-x · Cited by 2
Baturina, O. A., Reshetenko, T. V., Ridenour, J. A., Hudak, B. M., Brintlinger, T. H., Dysart, J. L., Finn, M., Kulikovsky, A. A., & Epshteyn, A. (2026) · ACS Applied Energy Materials · doi:10.1021/acsaem.5c03809 · Cited by 1
Template‐Based Structured Electrodes for High Power and Durable Proton Exchange Membrane Fuel Cells
Ren, Y., Liu, L., Hwang, D. K., & Lee, C. (2026) · SusMat · doi:10.1002/sus2.70081 · Cited by 1
Engineering asymmetric PEM for stable fuel cells at various RHs
Chen, X., An, L., Chi, B., Gu, Q., & Gao, P. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.08.320 · Cited by 1
Strategies for impure hydrogen use in polymer electrolyte fuel cell systems
Sarma, P. J. (2020) · Summit (Simon Fraser University) · Cited by 1
Elferjani, I. (2021) · theses.fr (ABES) · doi:10.70675/5d676794z6782z4392za9c5zf5c2fde62364 · Cited by 1
Efficient PEM fuel cells for portable applications
Chen, Z. (2019) · White Rose eTheses Online (University of Leeds, The University of Sheffield, University of York) · Cited by 1
Activity and degradation mechanisms of anodic electrocatalysts for the direct borohydride fuel cell
Lafforgue, C. (2019) · theses.fr (ABES) · doi:10.70675/5fd6962fz9cd6z4027zab9bz3018052bbd5f · Cited by 3
Talukdar, K. (2020) · elib (German Aerospace Center) · doi:10.18419/opus-11272 · Cited by 3
Rachman, B. A., Noerochim, L., & Purniawan, A. (2021) · Jurnal Teknik ITS · doi:10.12962/j23373539.v10i2.63983
Durability of Fuel Cell Electrocatalysts and Methods for Performance Assessment
Ceballos, B. M., & Zelenay, P. (2023) · Wiley eBooks · doi:10.1002/9783527830572.ch13 · Cited by 1
Fuel Cells – Polymer-Electrolyte Membrane Fuel Cell | Cathodes
Merzdorf, T., Hornberger, E., Ott, S., & Strasser, P. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-96022-9.00158-4
Environmental impact of manufacturing processes within the PEMFC manufacturing phase
Gramc, J., Pušavec, F., & Mori, M. (2024) · International Youth Conference on Energy · doi:10.1109/iyce60333.2024.10634943
“…diffusion electrodes or onto the PEM. i e w 2 0 Electrode manufacturing methods include slot die coating [25, 26], blade coating [27], ultrasonic spray coating [25, 28], reactive spray deposition [25, 29], electrospinning [25, 30], additive manufacturing [29], and direct membrane deposition [31].”
MethodChen, F., Chen, S., & Wei, Z. (2025) · Scientia Sinica Chimica · doi:10.1360/ssc-2025-0014
A review of hybrid membrane electrode assemblies for fuel cells and electrolyzers
Niu, Z., Qiao, K., Huang, S., Xu, L., Wang, S., Yun, J., & Cao, D. (2025) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2025.151832 · Cited by 1
Reshetenko, T. V., & Kulikovsky, A. A. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5392188
Tan, H. (2025) · eCommons (Cornell University) · doi:10.7298/rjg4-tg15
Yu, X., 龙清, Gao, Y., Li, W., Li, T., Dong, A., & Sheng, H. (2026) · ChemCatChem · doi:10.1002/cctc.70813
Prootonivahetusmembraaniga kütuseelemendi elektroodi valmistamistingimuste uurimine
Telpt, R. (2023) · DSpace repository (University of Tartu)
Pathania, A., Song, H., Ali, M. F., Phan, T. T., Kwon, H., Lee, H., Kim, H., Shin, D., & Bae, B. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.240665
Jeong, E., Oh, K., So, S., Kim, I., Lee, K. S., Lee, K. J., & Park, C. W. (2026) · Journal of Power Sources · doi:10.1016/j.jpowsour.2026.240887
Wang, R.-X., Yu, N., Chen, S.-P., Xu, Y.-M., Dong, B., & Chai, Y. (2026) · Fuel · doi:10.1016/j.fuel.2026.140572
Thiyagarajan, P. K., Kumar, P. M., Pullithadathil, B., & Vivek, V. G. (2026) · Journal of Thermal Engineering · doi:10.47481/jten.0088
Dumont, J. H., Hernandez, M. M., Crum, S. L. A., Spears, A. J., & Lee, K. (2026) · Electrochem · doi:10.3390/electrochem7030023
“To improve the tunability and reduce the waste of expensive materials during fabrication, researchers have moved towards AM for the fabrication of electrochemical devices [16].”
Kim, K.-D., KIM, J., Kang, B., LEE, S., PARK, J., BAEK, C.-M., & Kim, T. (2026) · Journal of Hydrogen and New Energy · doi:10.7316/jhne.2026.37.4.359
From half-cell to heavy-duty: a critical review of MXene catalysts for PEMFC cathodes
Kule, T. D., Bahru, T. B., Getachew, N. A., Kassa, T. S., Yessuf, A. M., Mohideen, M. M., Shibeshi, P. T., & Liu, Y. (2026) · Fuel · doi:10.1016/j.fuel.2026.141216
Mai, T. T., Cho, S., Kim, S., & Jang, S. (2026) · Small · doi:10.1002/smll.75759
Brown, A., Garsany, Y., & Stroman, R. O. (2026) · SSRN Electronic Journal · doi:10.2139/ssrn.7635734
Self-citation
Metadata
- Authors
- Sassin, M. B., Garsany, Y., Gould, B. D., & Swider-Lyons, K. E.
- Affiliations
- United States Naval Research Laboratory (US)
- Excet (United States) (US)
- U.S Naval Research Laboratory, Washington, District of Columbia 20375, United States
- Corresponding author
- Sassin, Megan B.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-12-08
- Volume
- 89
- Issue
- 1
- Pages
- 511-518
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2560462657
- Cited by
- 143
- References
- 30
- Citations by year
- 2026: 13 · 2025: 17 · 2024: 22 · 2023: 18 · 2022: 17 · 2021: 18 · 2020: 17 · 2019: 10 · 2018: 5 · 2017: 6
- FWCI
- 3.23
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Analytical Chemistry (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- membrane electrode assembly, fuel cells, ultrasonic spray deposition, perfluorosulfonic acid membranes, proton exchange membrane fuel cells
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.