Fabrication Method for Laboratory-Scale High-Performance Membrane Electrode Assemblies for Fuel Cells
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
) fuel cells based on ultrasonic spray deposition of a standard Pt/carbon electrocatalyst directly onto a perfluorosulfonic acid PEM.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“spray coating usually needs a lower catalyst content (the solid concentration is commonly less than 3 wt.%,e.g., ~0.6 wt.% [36], ~1.8 wt.% [104], or 2.5 wt.% [67]) to avoid the blockage of spraying nozzle”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [104]
In the citing paper
“While the thickness and porosity are independent of the ultrasonic nozzle height, the CL surface may crack when the distance between the nozzle and substrate is too short (e.g., 3.5 cm) due to the presence of excess liquid ink on the substrate [104].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [104]
In the citing paper
“To form a fine ink mist with well-defined droplets size, ultrasonic spray and electrospray were developed [104,162,163].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [104]
In the citing paper
“During spray coating, some spraying parameters influence the morphology and structure of the CL and hence the performance of the cell, such as the nozzle height [104], electrospray mode [67], or spraying voltage [163].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [104]
Citations
Cites
Recent Advances in Electrocatalysts for Oxygen Reduction Reaction
Shao, M., Chang, Q., Dodelet, J.-P., & Chenitz, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00462 · Cited by 3,903
Handbook of fuel cells: fundamentals, technology, and applications
(2003) · Focus on Catalysts · doi:10.1016/s1351-4180(03)00850-x · Cited by 3,324
Garsany, Y., Baturina, O. A., Swider-Lyons, K. E., & Kocha, S. S. (2010) · Analytical Chemistry · doi:10.1021/ac100306c · Cited by 703
Self-citationPark, Y.-C., Tokiwa, H., Kakinuma, K., Watanabe, M., & Uchida, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.091 · Cited by 389
Advanced Redox-Flow Batteries: A Perspective
Perry, M. L., & Weber, A. Z. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0101601jes · Cited by 330
Low Pt loading high performance cathodes for PEM fuel cells
Qi, Z., & Kaufman, A. (2003) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00477-9 · Cited by 273
Wright, A. G., Fan, J., Britton, B., Weissbach, T., Lee, H.-F., Kitching, E. A., Peckham, T. J., & Holdcroft, S. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00656f · Cited by 271
Shinozaki, K., Zack, J. W., Pylypenko, S., Pivovar, B. S., & Kocha, S. S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0551512jes · Cited by 254
Dependence of optimum Nafion content in catalyst layer on platinum loading
Sasikumar, G., Ihm, J. W., & Ryu, H. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.060 · Cited by 244
Impact of film drying procedures on RDE characterization of Pt/VC electrocatalysts
Garsany, Y., Singer, I. L., & Swider-Lyons, K. E. (2011) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2011.09.016 · Cited by 224
Self-citation
Research works printed but not linked: 1
- St-Pierre J., 2016, Springer Handbook of Electrochemical Energy, 611
Cited by
Anion-exchange membrane water electrolyzers and fuel cells
Yang, Y., Li, P., Zheng, X., Sun, W., Dou, S. X., Ma, T., & Pan, H. (2022) · Chemical Society Reviews · doi:10.1039/d2cs00038e · Cited by 575
Rabiee, H., Ge, L., Zhang, X., Hu, S., Li, M., & Yuan, Z. (2021) · Energy & Environmental Science · doi:10.1039/d0ee03756g · Cited by 509
A fundamental comprehension and recent progress in advanced Pt‐based ORR nanocatalysts
Wang, Y., Wang, D., & Li, Y. (2021) · SmartMat · doi:10.1002/smm2.1023 · Cited by 308
“To make clear the intrinsic mechanism, the Kongkanand group developed a high‐power density development of the cathode electrocatalysts as a supplement to verify the Gasteiger's conclusion.(129) They found that the O2 transport resistance serious affected the availability of Pt active sites.”
MethodKey Components and Design Strategy for a Proton Exchange Membrane Water Electrolyzer
Chen, Y., Liu, C., Xu, J., Xia, C., Wang, P., Xia, B. Y., Yan, Y., & Wang, X. (2023) · Small Structures · doi:10.1002/sstr.202200130 · Cited by 226
Deng, Y., Luo, J., Chi, B., Tang, H., Li, J., Qiao, X., Shen, Y., Yang, Y., Jia, C., Rao, P., et al. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101222 · Cited by 197
Gas diffusion layers for PEM fuel cells: Materials, properties and manufacturing – A review
Athanasaki, G., Jayakumar, A., & Kannan, A. M. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.10.058 · Cited by 180
The Controllable Design of Catalyst Inks to Enhance PEMFC Performance: A Review
Guo, Y., Pan, F., Chen, W., Ding, Z., Yang, D., Li, B., Ming, P., & Zhang, C. (2021) · Electrochemical Energy Reviews · doi:10.1007/s41918-020-00083-2 · Cited by 175
“And although the scalable manufacturing of CLs remains challenging in the commercialization of PEMFCs, significant efforts have been made toward ink deposition methods such as ultrasonic spraying [13], electrospray deposition [14], electrospinning [15], slot dying [16], inkjet printing [17], doctor blade [18], screen…”
BackgroundMethodInfluentialKabir, S., Myers, D. J., Kariuki, N., Park, J., Wang, G., Baker, A., Macauley, N., Mukundan, R., More, K. L., & Neyerlin, K. C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b11365 · Cited by 153
Yang, G., Lee, C., Qiao, X., Babu, S. K., Martinez, U., & Spendelow, J. S. (2024) · Electrochemical Energy Reviews · doi:10.1007/s41918-023-00208-3 · Cited by 156
Highly Stable, Low Gas Crossover, Proton‐Conducting Phenylated Polyphenylenes
Adamski, M., Skalski, T. J. G., Britton, B., Peckham, T. J., Metzler, L., & Holdcroft, S. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201703916 · Cited by 135
Garsany, Y., Atkinson, R. W., Sassin, M. B., Hjelm, R. M. E., Gould, B. D., & Swider-Lyons, K. E. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.1361805jes · Cited by 116
Self-citationSassin, M. B., Garsany, Y., Atkinson, R. W., Hjelm, R. M. E., & Swider-Lyons, K. E. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.04.194 · Cited by 100
Self-citationFouzaï, I., Gentil, S., Bassetto, V. C., Silva, W. O., Maher, R., & Girault, H. H. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta07470e · Cited by 102
Highly Active Nickel-Based Catalyst for Hydrogen Evolution in Anion Exchange Membrane Electrolysis
Faid, A. Y., Barnett, A. O., Seland, F., & Sunde, S. (2018) · Catalysts · doi:10.3390/catal8120614 · Cited by 110
“AEMs with h gh ionic conductivity and stability, as well s catalysts with improved ac ivity and durability in alkaline conditions have been studied in various reports in recent years [3,15,16].”
BackgroundThe Role of Compressive Stress on Gas Diffusion Media Morphology and Fuel Cell Performance
Atkinson, R. W., Garsany, Y., Gould, B. D., Swider‐Lyons, K. E., & Zenyuk, I. V. (2017) · ACS Applied Energy Materials · doi:10.1021/acsaem.7b00077 · Cited by 99
Self-citationLiu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
Gravure coating for roll-to-roll manufacturing of proton-exchange-membrane fuel cell catalyst layers
Mauger, S. A., Neyerlin, K. C., Yang-Neyerlin, A. C., More, K. L., & Ulsh, M. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0091813jes · Cited by 81
Hnát, J., Plevová, M., Tufa, R. A., Žitka, J., Paidar, M., & Bouzek, K. (2019) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.05.054 · Cited by 82
Alink, R., Singh, R., Schneider, P., Christmann, K., Schall, J., Keding, R., & Zamel, N. (2020) · Molecules · doi:10.3390/molecules25071523 · Cited by 77
“The effect of the manufacturing process on catalyst coated membranes produced in the lab was also investigated in [16].”
BackgroundMethodFabrication of high-performance gas-diffusion-electrode based membrane-electrode assemblies
Mauger, S. A., Pfeilsticker, J. R., Wang, M., Medina, S., Yang-Neyerlin, A. C., Neyerlin, K. C., Stetson, C., Pylypenko, S., & Ulsh, M. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227581 · Cited by 67
Riasse, R., Lafforgue, C., Vandenberghe, F., Micoud, F., Morin, A., Arenz, M., Durst, J., & Chatenet, M. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232491 · Cited by 73
Van Cleve, T., Wang, G., Mooney, M., Cetinbas, C. F., Kariuki, N., Park, J., Farghaly, A., Myers, D., & Neyerlin, K. C. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228889 · Cited by 66
Li, H., Zhao, H., Tao, B., Xu, G., Gu, S., Wang, G., & Chang, H. (2022) · Nanomaterials · doi:10.3390/nano12234173 · Cited by 69
Guo, Y., Yang, D., Li, B., Yang, D., Ming, P., & Zhang, C. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c07070 · Cited by 65
Yang, C. N., Han, N., Wang, Y., Yuan, X., Xu, J., Huang, H., Fan, J., Li, H., & Wang, H. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c02386 · Cited by 66
Grandi, M., Rohde, S., Liu, D. J., Gollas, B. R., & Hacker, V. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.232734 · Cited by 66
Huang, Q., Hu, L., Chen, X., Cai, W., Wang, L., & Wang, B. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202302582 · Cited by 65
Pushkareva, I. V., Pushkarev, A. S., Kalinichenko, V. N., Chumakov, R. G., Soloviev, M. A., Liang, Y., Millet, P., & Grigoriev, S. V. (2021) · Catalysts · doi:10.3390/catal11020256 · Cited by 63
“Such mild manufacturing conditions prevented the damage to the porous structure (the GDE and its microporous sublayer), which could be caused by any type of hot-press approach and ensured a high MEA performance at high current densities [78,79].”
BackgroundWang, Y., Liu, T., Sun, H., He, W., Fan, Y., & Wang, S. (2020) · Electrochimica Acta · doi:10.1016/j.electacta.2020.136491 · Cited by 62
Sun, R., Xia, Z., Xu, X., Deng, R., Wang, S., & Sun, G. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104919 · Cited by 68
Molecular branching as a simple approach to improving polymer electrolyte membranes
Adamski, M., Skalski, T. J. G., Schibli, E. M., Killer, M., Wu, Y., Peressin, N., Frisken, B. J., & Holdcroft, S. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.117539 · Cited by 62
Turtayeva, Z., Xu, F., Dillet, J., Mozet, K., Peignier, R., Celzard, A., & Maranzana, G. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.03.043 · Cited by 61
Planar polymer electrolyte membrane fuel cells: powering portable devices from hydrogen
Sapkota, P., Boyer, C. A., Dutta, R., Cazorla, C., & Aguey‐Zinsou, K. (2019) · Sustainable Energy & Fuels · doi:10.1039/c9se00861f · Cited by 63
Multiwall Carbon Nanotube-Based Microporous Layers for Polymer Electrolyte Membrane Fuel Cells
Lee, J. K., Banerjee, R., George, M. G., Muirhead, D., Shrestha, P., Liu, H., Ge, N., Chevalier, S., & Bazylak, A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0861712jes · Cited by 54
Rasaki, S. A., Liu, C., Lao, C., Zhang, H., & Chen, Z. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111369 · Cited by 55
Advancements in printed components for proton exchange membrane fuel cells: A comprehensive review
da Costa, G. P., Garcia, D. M. E., Nguyen, T. H. V., Lacharmoise, P. D., & Simao, C. D. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.05.072 · Cited by 55
Wang, H., Yan, Z., Cheng, F., & Chen, J. (2024) · Advanced Science · doi:10.1002/advs.202401652 · Cited by 61
High power, Low-Pt membrane electrode assemblies for proton exchange membrane fuel cells
Garsany, Y., Atkinson, R. W., Gould, B. D., & Swider-Lyons, K. E. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.10.073 · Cited by 51
Self-citationGood practice guide for papers on fuel cells and electrolysis cells for the Journal of Power Sources
Chatenet, M., Benziger, J. B., Inaba, M., Kjelstrup, S., Zawodzinski, T. A., & Raccichini, R. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.227635 · Cited by 51
Msomi, P. F., Nonjola, P., Ndungu, P. G., & Ramontja, J. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.08.012 · Cited by 50
Li, B., Liu, Y., Guo, Y., Yang, D., Yang, D., Ming, P., & Zhang, C. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.06.216 · Cited by 44
Dual-layer catalyst layers for increased proton exchange membrane fuel cell performance
Garsany, Y., Atkinson, R. W., Gould, B. D., Martin, R., Dubau, L., Chatenet, M., & Swider-Lyons, K. E. (2021) · Journal of Power Sources · doi:10.1016/j.jpowsour.2021.230574 · Cited by 43
Self-citationWang, X., Fang, J., Liu, X., Zhang, X., Lv, Q., Xu, Z., Zhang, X., Zhu, W. D., & Zhuang, Z. (2019) · Science China Materials · doi:10.1007/s40843-019-1224-5 · Cited by 42
Yang, D., Guo, Y., Tang, H., Wang, Y., Yang, D., Ming, P., Zhang, C., Li, B., & Zhu, S. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.07.172 · Cited by 44
Wang, M., Medina, S., Ochoa-Lozano, J., Mauger, S. A., Pylypenko, S., Ulsh, M., & Bender, G. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.01.186 · Cited by 42
“Previous studies demonstrated that hot pressing has a large impact on electrochemical surface area [25,29], catalyst layer porosity and structure [30,31], and single cell performance [25,30 e 33].”
Recent Development of Fuel Cell Core Components and Key Materials: A Review
Zhang, Y., Wang, J., & Yao, Z. (2023) · Energies · doi:10.3390/en16052099 · Cited by 42
On the state and stability of fuel cell catalyst inks
Bapat, S., Giehl, C., Kohsakowski, S., Peinecke, V., Schäffler, M., & Segets, D. (2021) · Advanced Powder Technology · doi:10.1016/j.apt.2021.08.030 · Cited by 38
Highly Stable, Low Gas Crossover, Proton‐Conducting Phenylated Polyphenylenes
Adamski, M., Skalski, T. J. G., Britton, B., Peckham, T. J., Metzler, L., & Holdcroft, S. (2017) · Angewandte Chemie · doi:10.1002/ange.201703916 · Cited by 37
Kabir, S., Cleve, T. V., Khandavalli, S., Medina, S., Pylypenko, S., Mauger, S. A., Ulsh, M., & Neyerlin, K. C. (2021) · ACS Applied Energy Materials · doi:10.1021/acsaem.0c03073 · Cited by 34
Arenas, L. F., Hadjigeorgiou, G. M., Jones, S., Dijk, N. V., Hodgson, D., Cruden, A., & de León, C. P. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2020.06.292 · Cited by 32
Wang, Z., Wu, Y., Zhu, B., Chen, Q., Zhang, Y., Xu, Z., Sun, D., Lin, L., & Wu, D. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.2c18814 · Cited by 32
Zhu, Y., Guo, F., Zhang, S., Wang, Z., Chen, R., He, G., Sun, X. A., & Cheng, N. (2025) · Electrochemical Energy Reviews · doi:10.1007/s41918-025-00252-1 · Cited by 39
Yu, R., Guo, H., Chen, H., & Ye, F. (2023) · Energy Conversion and Management · doi:10.1016/j.enconman.2023.116845 · Cited by 29
Park, D., Kim, M., Lee, H., Lee, W., Byeon, J., Kim, J., Jang, J., & Park, K. (2022) · Advanced Materials Interfaces · doi:10.1002/admi.202102063 · Cited by 28
Influence of Cathode Gas Diffusion Media Porosity on Open-Cathode Fuel Cells
Atkinson, R. W., Rodgers, J. A., Hazard, M. W., Stroman, R. O., & Gould, B. D. (2018) · Journal of The Electrochemical Society · doi:10.1149/2.0041813jes · Cited by 27
Self-citationSchmitt, N., Schmidt, M., Hübner, G., & Etzold, B. J. M. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231530 · Cited by 29
Chen, Y., Zhao, J., Jin, C., Ke, Y., Li, D., & Wang, Z. (2022) · Membranes · doi:10.3390/membranes12070645 · Cited by 27
Impacts of cathode catalyst layer defects on performance and durability in PEM fuel cells
Stoll, J., Zhao, N., Yuan, X., Girard, F., Kjeang, E., & Shi, Z. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.233565 · Cited by 24
Impact of the Anode Catalyst Layer Design on the Performance of H2O2-Direct Borohydride Fuel Cells
Hjelm, R. M. E., Lafforgue, C., Atkinson, R. W., Garsany, Y., Stroman, R. O., Chatenet, M., & Swider‐Lyons, K. E. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0681914jes · Cited by 23
Self-citationMicrowave-assisted Diels–Alder polycondensation of proton conducting poly(phenylene)s
Adamski, M., Skalski, T. J. G., Xu, S., Killer, M., Schibli, E. M., Frisken, B. J., & Holdcroft, S. (2019) · Polymer Chemistry · doi:10.1039/c8py01804a · Cited by 22
Impacts of bubble defects in proton exchange membranes on fuel cell performance and durability
Stoll, J., Zhao, N., Yuan, X., Girard, F., Kjeang, E., & Shi, Z. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.234072 · Cited by 23
The Impact of Hot-Press Conditions on the Durability of Polymer Electrolyte Membrane Fuel Cells
Wang, M., Taylor, A. K., Ochoa-Lozano, J., Medina, S., Pfeilsticker, J., Mauger, S. A., Pylypenko, S., Ulsh, M., & Bender, G. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.12.098 · Cited by 22
Effect of ionomer volume fraction within cathode catalyst layer on performance of a PEMFC
Yu, R., Guo, H., Chen, H., & Ye, F. (2023) · Energy · doi:10.1016/j.energy.2023.127631 · Cited by 21
Saeidfar, A., Kırlıoğlu, A. C., Gürsel, S. A., & Yeşilyurt, S. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235676 · Cited by 20
Advances in membranes and electrocatalysts to optimize proton-exchange membrane fuel cells
Mojarrad, N. R., Kırlıoğlu, A. C., Ölmez, B., Hamedani, A. A., Buldu-Aktürk, M., Zabara, M. A., Yürüm, A., Ozkan, C. S., Gürsel, S. A., Kaplan, B. Y., et al. (2025) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2025.102728 · Cited by 32
Advances in Low Pt Loading Membrane Electrode Assembly for Proton Exchange Membrane Fuel Cells
Cao, F., Ding, R. F., Rui, Z., Wang, X., Meng, Z., Zhang, B., Dong, W., Li, J., Liu, J., & Jiang, X. (2023) · Molecules · doi:10.3390/molecules28020773 · Cited by 20
“The latter has now become more commonly adopted because CLs with much lower interfacial impedance than those prepared using GDE can be obtained [105].”
BackgroundKoorata, P. K., & Bhat, S. D. (2021) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2021.10.073 · Cited by 18
Xuan, L., Wang, Y., Lan, J., Tao, K., Zhou, C., & Mei, D. (2022) · Energy · doi:10.1016/j.energy.2022.126243 · Cited by 18
Tempelaere, M., Zimmermann, M., & Chatenet, M. (2023) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2023.101353 · Cited by 22
Gong, Z., Wang, H., Li, C., Sang, Q., Xie, Y. H., Zhang, X.-S., & Liu, Y. (2024) · Green Chemical Engineering · doi:10.1016/j.gce.2024.06.001 · Cited by 19
The interplay between impedance parameters, structure, and performance of fuel cell catalyst layers
Moghaddam, R. B., & Easton, E. B. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115792 · Cited by 17
Cooperative proton conduction in sulfonated and phosphonated hybrid random copolymers
Kumar, A. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta07732a · Cited by 17
Kongara, A., Samuel, A. K., Kapadia, G., & Chandiran, A. K. (2024) · Communications Materials · doi:10.1038/s43246-024-00662-6 · Cited by 16
“ECSA of catalyst fi lm coated on a substrate is dependent on the catalyst surface area, pore volume, pore diameter, and diffusion path lengths of the reactants involved 115 – 117 , which in turn depends on the catalyst ink composition and coating procedure 118 .”
Kang, J., Zheng, W., Chen, S., Yang, D., Li, B., Zhang, C., & Ming, P. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235269 · Cited by 16
Lauf, P., Lloret, V., Geuß, M., Collados, C. C., Thommes, M., Mayrhofer, K. J. J., Ehelebe, K., & Cherevko, S. (2023) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/acdafb · Cited by 18
Exploring critical parameters of electrode fabrication in polymer electrolyte membrane fuel cells
Talukdar, K., Morawietz, T., Sarkezi-Selsky, P., Yezerska, K., Sergeev, O., Heger, J., Jahnke, T., Gazdzicki, P., & Friedrich, K. A. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.231638 · Cited by 15
Yang, M., Yan, S., Du, A., Liu, J., & Xu, S. (2022) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2022.09.142 · Cited by 15
Arcot, M. P., Cronin, M., Fowler, M. W., & Pritzker, M. D. (2023) · Electrochem · doi:10.3390/electrochem4010001 · Cited by 19
“Specific commercial CCMs with an active area of 48 cm 2 and catalyst layer defects developed during fabrication in a commercial production line were obtained from an industrial fuel cell manufacturing partner [15,26].”
Highly active and durable core–shell electrocatalysts for proton exchange membrane fuel cells
Wu, H., Xiao, F., Wang, J., Gu, M. D., & Shao, M. (2023) · Nano Research · doi:10.1007/s12274-023-6297-3 · Cited by 13
Liu, H., Qin, J., Zhang, W., Xu, Q., Bhuvanendran, N., Ren, J., & Su, H. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.163196 · Cited by 15
Kim, M.-H., Park, D., Byeon, J., Lim, D.-M., Gu, Y.-H., Park, K., & Park, K. (2023) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2023.03.062 · Cited by 12
Yang, Y., Yuan, S., Liu, J., Zhang, Z., & Lu, T. (2024) · Energy · doi:10.1016/j.energy.2024.130605 · Cited by 12
Cho, J., Ko, J., & Park, S. (2020) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ab8d71 · Cited by 12
Influence of Gas Diffusion Media Compression on Open-Cathode Fuel Cells
Atkinson, R. W., Hazard, M. W., Rodgers, J. A., Stroman, R. O., & Gould, B. D. (2019) · Journal of The Electrochemical Society · doi:10.1149/2.0021913jes · Cited by 12
Self-citationMitra, D., Heinrich, K., Gierse, S., Zeiner, C., Siegel, F., Willert, A., & Zichner, R. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236503 · Cited by 12
Xian, L., Li, Z., Wang, Q., Ding, X., Kong, J., Zuo, B., Chen, L., & Tao, W. (2025) · Renewable Energy · doi:10.1016/j.renene.2025.122795 · Cited by 12
Long, H., Sit, C. Y., Paliwal, A., Cheng, T., Gupta, J. K., Reynolds, M. A., Son, Y. J., Zhang, K., Gewirth, A. A., & Kenis, P. J. A. (2025) · EES Catalysis · doi:10.1039/d5ey00324e · Cited by 12
Lauf, P., Morales, A. L., Nozadze, A., Ayoub, M., Bierling, M., Ehelebe, K., Thiele, S., Mayrhofer, K. J. J., Lloret, V., & Cherevko, S. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235352 · Cited by 11
Longitudinal strand ordering leads to shear thinning in Nafion
Michelarakis, N., Franz, F., Gkagkas, K., & Gräter, F. (2021) · Physical Chemistry Chemical Physics · doi:10.1039/d1cp02024b · Cited by 11
Empirical Modeling of Fuel Cell Durability: Cathode Catalyst Layer Degradation
Messing, M. (2017) · Summit (Simon Fraser University) · Cited by 11
Lafforgue, C., Toudret, P., Micoud, F., Heitzmann, M., Blachot, J.-F., & Chatenet, M. (2024) · Journal of Power Sources · doi:10.1016/j.jpowsour.2024.235851 · Cited by 11
Kariuki, N. N., Haug, A. T., Park, J. W., Lindell, M. J., & Myers, D. J. (2022) · Journal of The Electrochemical Society · doi:10.1149/1945-7111/ac94a4 · Cited by 11
Effect of GDM Pairing on PEMFC Performance in Flow-Through and Dead-Ended Anode Mode
Garsany, Y., Bancroft, C. H., Atkinson, R. W., Bethune, K. P., Gould, B. D., & Swider‐Lyons, K. E. (2020) · Molecules · doi:10.3390/molecules25061469 · Cited by 10
“PTFE Skived Tape (Enflo) were placed on the anode and cathode side of the membrane to enable the desired GDM compression [16,26,27].”
BackgroundMethodSelf-citationPei, Y., Zhu, W., Yue, R., Yao, J., Liu, X., Wang, L., Zhang, J., Yin, Y. S., & Guiver, M. D. (2023) · Journal of Power Sources · doi:10.1016/j.jpowsour.2023.232904 · Cited by 10
Grebener, L., Odungat, A. S., Zhu, Y., Pasdag, O., Radev, I., Nürenberg, E., Kubina, A., Peinecke, V., Kohsakowski, S., Segets, D., et al. (2025) · Journal of Power Sources · doi:10.1016/j.jpowsour.2025.236457 · Cited by 12
Berber, M. R., Althubiti, N., Alrowaili, Z. A., Rosa, F., & Iranzo, A. (2021) · Fuel · doi:10.1016/j.fuel.2021.121681 · Cited by 9
Jiang, S., Pan, J., Deng, M., Li, M., Yang, N., Li, L., & Wei, Z. (2023) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.3c04754 · Cited by 9
Xie, M., Chen, J., & Li, B. (2024) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2024.02.052 · Cited by 9
Choi, W.-J., Kang, I., Yu, D. M., Yoon, S. J., So, S., & Oh, K. (2024) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-024-00221-2 · Cited by 10
Zhao, Q., Morawietz, T., Gazdzicki, P., & Friedrich, K. A. (2024) · Electrochimica Acta · doi:10.1016/j.electacta.2024.145273 · Cited by 8
Metadata
- Authors
- Sassin, M. B., Garsany, Y., Gould, B. D., & Swider-Lyons, K. E.
- Affiliations
- United States Naval Research Laboratory (US)
- Excet (United States) (US)
- U.S Naval Research Laboratory, Washington, District of Columbia 20375, United States
- Corresponding author
- Sassin, Megan B.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-12-08
- Volume
- 89
- Issue
- 1
- Pages
- 511-518
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2560462657
- Cited by
- 143
- References
- 30
- Citations by year
- 2026: 13 · 2025: 17 · 2024: 22 · 2023: 18 · 2022: 17 · 2021: 18 · 2020: 17 · 2019: 10 · 2018: 5 · 2017: 6
- FWCI
- 3.23
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Analytical Chemistry (publishedVersion)
- PubMed (publishedVersion)
- Funders
- Office of Naval Research
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Energy › Renewable Energy, Sustainability and the Environment › Electrocatalysts for Energy Conversion
- Physical Sciences › Materials Science › Materials Chemistry › Advancements in Solid Oxide Fuel Cells
- Keywords
- membrane electrode assembly, fuel cells, ultrasonic spray deposition, perfluorosulfonic acid membranes, proton exchange membrane fuel cells
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.