The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Complete Additively Manufactured (3D-Printed) Electrochemical Sensing Platform
Abstract
Herein, we report a complete additively manufactured (AM) electrochemical sensing platform. In this approach, a fully AM/3D-printed electrochemical system, using a conventional low-cost 3D printer (fused deposition modeling) fabricating both the conductive electrodes and the nonconductive/chemically inert electrochemical cell is reported. The electrodes (working, counter, and pseudo-reference) are AM using a conductive fused-filament comprised of a mixture of carbon black nanoparticles and polylactic acid (CB/PLA). AM components partially coated with silver ink presented a similar behavior to a conventional Ag/AgCl reference electrode. The performance of the AM working electrode was evaluated after a simple and fast polishing procedure on sandpaper and electrochemical activation in a NaOH solution (0.5 mol L –1 ). Following the electrochemical activation step, a considerable improvement in the electrochemical behavior (current intensity and voltammetric profile) was obtained for model analytes, such as dopamine, hexaammineruthenium(III) chloride, ferricyanide/ferrocyanide, uric acid, and ascorbic acid. Excellent repeatability (RSD = 0.4%, N = 10) and limit of detection (0.1 μmol L –1 ) were obtained with the all complete AM electrochemical system for dopamine analysis. The electrochemical performance of the developed system (after simple electrochemical activation of the working electrode) was similar or better than those obtained using commercial glassy carbon and screen-printed carbon electrodes. The results shown here represents a significant advance in AM (3D printing) technology for analytical chemistry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carbon-based materials as supercapacitor electrodes
Zhang, L. L., & Zhao, X. S. (2009) · Chemical Society Reviews · doi:10.1039/b813846j · Cited by 7,459
Carbon materials for the electrochemical storage of energy in capacitors
Frackowiak, E., & Béguin, F. (2001) · Carbon · doi:10.1016/s0008-6223(00)00183-4 · Cited by 4,523
Theory and Application of Cyclic Voltammetry for Measurement of Electrode Reaction Kinetics.
Nicholson, R. S. (1965) · Analytical Chemistry · doi:10.1021/ac60230a016 · Cited by 3,446
3D-printing technologies for electrochemical applications
Ambrosi, A., & Pumera, M. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00714c · Cited by 1,040
Au, A. K., Huynh, W., Horowitz, L. F., & Folch, A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201504382 · Cited by 788
Sheng, Z.-H., Zheng, X.-Q., Xu, J.-Y., Bao, W.-J., Wang, F.-B., & Xia, X.-H. (2012) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2012.01.030 · Cited by 748
3D Printed Graphene Based Energy Storage Devices
Foster, C. W., Down, M. P., Zhang, Y., Ji, X., Rowley-Neale, S. J., Smith, G. C., Kelly, P. J., & Banks, C. E. (2017) · Scientific Reports · doi:10.1038/srep42233 · Cited by 471
Self-citationRecent applications of carbon-based nanomaterials in analytical chemistry: Critical review
Scida, K., Stege, P. W., Haby, G., Messina, G. A., & García, C. D. (2011) · Analytica Chimica Acta · doi:10.1016/j.aca.2011.02.025 · Cited by 432
Recent Advances in Analytical Chemistry by 3D Printing
Gross, B., Lockwood, S. Y., & Spence, D. M. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.6b04344 · Cited by 359
3D printing for chemical, pharmaceutical and biological applications
Capel, A. J., Rimington, R. P., Lewis, M. P., & Christie, S. D. R. (2018) · Nature Reviews Chemistry · doi:10.1038/s41570-018-0058-y · Cited by 312
3D printing for electroanalysis: From multiuse electrochemical cells to sensors
Cardoso, R. M., Mendonça, D. M. H., Silva, W. P., Silva, M. N. T., Nossol, E., da Silva, R. A. B., Richter, E. M., & Muñoz, R. A. A. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.06.021 · Cited by 294
Self-citation3D-Printed Graphene/Polylactic Acid Electrodes Promise High Sensitivity in Electroanalysis
Manzanares Palenzuela, C. L., Novotný, F., Krupička, P., Sofer, Z., & Pumera, M. (2018) · Analytical Chemistry · doi:10.1021/acs.analchem.8b00083 · Cited by 275
(Bio)Analytical chemistry enabled by 3D printing: Sensors and biosensors
Manzanares Palenzuela, C. L., & Pumera, M. (2018) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2018.03.016 · Cited by 218
Three-Dimensional Printed Electrode and Its Novel Applications in Electronic Devices
Foo, C. Y., Lim, H. N., Mahdi, M. A., Wahid, M. H., & Huang, N. M. (2018) · Scientific Reports · doi:10.1038/s41598-018-25861-3 · Cited by 213
Rymansaib, Z., Iravani, P., Emslie, E., Medvidović‐Kosanović, M., Sak‐Bosnar, M., Verdejo, R., & Marken, F. (2016) · Electroanalysis · doi:10.1002/elan.201600017 · Cited by 176
dos Santos, P. L., Katic, V., Loureiro, H. C., dos Santos, M. F., dos Santos, D. P., Formiga, A. L. B., & Bonacin, J. A. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2018.11.013 · Cited by 163
Wirth, D. M., Sheaff, M. J., Waldman, J. V., Symcox, M. P., Whitehead, H. D., Sharp, J. D., Doerfler, J. R., Lamar, A. A., & LeBlanc, G. (2019) · Analytical Chemistry · doi:10.1021/acs.analchem.9b01331 · Cited by 142
Self‐Contained Polymer/Metal 3D Printed Electrochemical Platform for Tailored Water Splitting
Ambrosi, A., & Pumera, M. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700655 · Cited by 141
Single-step fabrication of electrochemical flow cells utilizing multi-material 3D printing
O’Neil, G. D., Ahmed, S. S., Halloran, K., Janusz, J. N., Rodríguez, A., & Rodríguez, I. M. T. (2018) · Electrochemistry Communications · doi:10.1016/j.elecom.2018.12.006 · Cited by 141
Simultaneous electrochemical determination of dopamine, melatonin, methionine and caffeine
Molaakbari, E., Mostafavi, A., & Beitollahi, H. (2014) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2014.10.130 · Cited by 131
Multimaterial 3D-Printed Water Electrolyzer with Earth-Abundant Electrodeposited Catalysts
Ambrosi, A., & Pumera, M. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b04327 · Cited by 93
Honeychurch, K. C., Rymansaib, Z., & Iravani, P. (2018) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2018.04.054 · Cited by 91
Caetano, F. R., Felippe, L. B., Zarbin, A. J. G., Bergamini, M. F., & Junior, L. H. M. (2016) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2016.11.096 · Cited by 90
3D‐printed Electrodes for Sensing of Biologically Active Molecules
Liyarita, B. R., Ambrosi, A., & Pumera, M. (2018) · Electroanalysis · doi:10.1002/elan.201700828 · Cited by 62
Kim, S., & Park, S. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2006.09.060 · Cited by 58
Cited by
Fundamentals, Applications, and Future Directions of Bioelectrocatalysis
Chen, H., Simoska, O., Lim, K., Grattieri, M., Yuan, M., Dong, F., Lee, Y. S., Beaver, K., Weliwatte, S., Gaffney, E. M., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00472 · Cited by 492
Additive-manufactured (3D-printed) electrochemical sensors: A critical review
Cardoso, R. M., Kalinke, C., Rocha, R. G., dos Santos, P. L., Rocha, D. P., Oliveira, P. R., Janegitz, B. C., Bonacin, J. A., Richter, E. M., & Munoz, R. A. A. (2020) · Analytica Chimica Acta · doi:10.1016/j.aca.2020.03.028 · Cited by 460
Self-citationExtrusion-Based 3D Printing Applications of PLA Composites: A Review
Tümer, E. H., & Erbil, H. Y. (2021) · Coatings · doi:10.3390/coatings11040390 · Cited by 454
Carbon black as an outstanding and affordable nanomaterial for electrochemical (bio)sensor design
Arduini, F., Cinti, S., Mazzaracchio, V., Scognamiglio, V., Amine, A., & Moscone, D. (2020) · Biosensors and Bioelectronics · doi:10.1016/j.bios.2020.112033 · Cited by 298
Metadata
- Authors
- Richter, E. M., Rocha, D. P., Cardoso, R. M., Keefe, E. M., Foster, C. W., Munoz, R. A. A., & Banks, C. E.
- Venue
- Analytical Chemistry
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-09-19
- Volume
- 91
- Issue
- 20
- Pages
- 12844-12851
- ISSN
- 0003-2700 (ISSN-L)
- 1520-6882
- OpenAlex
- W2974908736
- Cited by
- 338
- References
- 25
- FWCI
- 10.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.