The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Stabilizing Perovskite Structures by Tuning Tolerance Factor: Formation of Formamidinium and Cesium Lead Iodide Solid-State Alloys
Abstract
Goldschmidt tolerance factor ( t ) is an empirical index for predicting stable crystal structures of perovskite materials. A t value between 0.8 and 1.0 is favorable for cubic perovskite structure, and larger (>1) or smaller (<0.8) values of tolerance factor usually result in nonperovskite structures. CH(NH 2 ) 2 PbI 3 (FAPbI 3 ) can exist in the perovskite α-phase (black phase) with good photovoltaic properties. However, it has a large tolerance factor and is more stable in the hexagonal δ H -phase (yellow phase), with δ H -to-α phase-transition temperature higher than room temperature. On the other hand, CsPbI 3 is stabilized to an orthorhombic structure (δ O -phase) at room temperature due to its small tolerance factor. We find that, by alloying FAPbI 3 with CsPbI 3, the effective tolerance factor can be tuned, and the stability of the photoactive α-phase of the mixed solid-state perovskite alloys FA 1– x Cs x PbI 3 is enhanced, which is in agreement with our first-principles calculations. Thin films of the FA 0.85 Cs 0.15 PbI 3 perovskite alloy demonstrate much improved stability in a high-humidity environment; this contrasts significantly with the pure FAPbI 3 film for which the α-to-δ H phase transition (associated with yellowing appearance) is accelerated by humidity environment. Due to phase stabilization, the FA 0.85 Cs 0.15 PbI 3 solid-state alloy showed better solar cell performance and device stability than its FAPbI 3 counterparts. Our studies suggest that tuning the tolerance factor through solid-state alloying can be a general strategy to stabilize the desired perovskite structure for solar cell applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Die Gesetze der Krystallochemie
Goldschmidt, V. M. (1926) · Die Naturwissenschaften · doi:10.1007/bf01507527 · Cited by 4,012
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance
Yin, W., Shi, T., & Yan, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306281 · Cited by 2,334
Reversible photo-induced trap formation in mixed-halide hybrid perovskites for photovoltaics
Hoke, E. T., Slotcavage, D. J., Dohner, E. R., Bowring, A. R., Karunadasa, H. I., & McGehee, M. D. (2015) · Chemical Science · doi:10.1039/c4sc03141e · Cited by 2,295
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
Formamidinium and Cesium Hybridization for Photo‐ and Moisture‐Stable Perovskite Solar Cell
Lee, J., Kim, D., Kim, H., Seo, S., Cho, S. M., & Park, N. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501310 · Cited by 1,663
Giant switchable photovoltaic effect in organometal trihalide perovskite devices
Xiao, Z., Yuan, Y., Shao, Y., Wang, Q., Dong, Q., Bi, C., Sharma, P., Gruverman, A., & Huang, J. (2015) · Nature Materials · doi:10.1038/nmat4150 · Cited by 1,625
Reversible Hydration of CH3NH3PbI3 in Films, Single Crystals, and Solar Cells
Leguy, A. M. A., Hu, Y., Campoy-Quiles, M., Alonso, M. I., Weber, O. J., Azarhoosh, P., van Schilfgaarde, M., Weller, M. T., Bein, T., Nelson, J., et al. (2015) · Chemistry of Materials · doi:10.1021/acs.chemmater.5b00660 · Cited by 1,366
Yang, J., Siempelkamp, B. D., Liu, D., & Kelly, T. L. (2015) · ACS Nano · doi:10.1021/nn506864k · Cited by 1,351
Mixed‐Organic‐Cation Perovskite Photovoltaics for Enhanced Solar‐Light Harvesting
Pellet, N., Gao, P., Gregori, G., Yang, T., Nazeeruddin, M. K., Maier, J., & Grätzel, M. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201309361 · Cited by 1,306
Heo, J. H., Han, H. J., Kim, D., Ahn, T. K., & Im, S. H. (2015) · Energy & Environmental Science · doi:10.1039/c5ee00120j · Cited by 1,187
Kulbak, M., Cahen, D., & Hodes, G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00968 · Cited by 1,103
Steric engineering of metal-halide perovskites with tunable optical band gaps
Filip, M. R., Eperon, G. E., Snaith, H. J., & Giustino, F. (2014) · Nature Communications · doi:10.1038/ncomms6757 · Cited by 1,081
Solid-state principles applied to organic–inorganic perovskites: new tricks for an old dog
Kieslich, G., Sun, S., & Cheetham, A. K. (2014) · Chem. Sci. · doi:10.1039/c4sc02211d · Cited by 1,030
CH3NH3SnxPb(1–x)I3 Perovskite Solar Cells Covering up to 1060 nm
Ogomi, Y., Morita, A., Tsukamoto, S., Saitho, T., Fujikawa, N., Shen, Q., Toyoda, T., Yoshino, K., Pandey, S. S., Ma, T., et al. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5002117 · Cited by 978
High‐Efficiency Perovskite Solar Cells Based on the Black Polymorph of HC(NH2)2PbI3
Lee, J., Seol, D., Cho, A., & Park, N. (2014) · Advanced Materials · doi:10.1002/adma.201401137 · Cited by 951
Templating and structural engineering in organic–inorganic perovskites
Mitzi, D. B. (2001) · Journal of the Chemical Society, Dalton Transactions · doi:10.1039/b007070j · Cited by 945
The Renaissance of Halide Perovskites and Their Evolution as Emerging Semiconductors
Stoumpos, C. C., & Kanatzidis, M. G. (2015) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00229 · Cited by 820
Stabilization of the Trigonal High-Temperature Phase of Formamidinium Lead Iodide
Binek, A., Hanusch, F. C., Docampo, P., & Bein, T. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00380 · Cited by 572
Misra, R. K., Aharon, S., Li, B., Mogilyansky, D., Visoly-Fisher, I., Etgar, L., & Katz, E. A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502642b · Cited by 552
Cesium-doped methylammonium lead iodide perovskite light absorber for hybrid solar cells
Choi, H., Jeong, J., Kim, H.-B., Kim, S., Walker, B., Kim, G.-H., & Kim, J. Y. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.04.017 · Cited by 544
Hailegnaw, B., Kirmayer, S., Edri, E., Hodes, G., & Cahen, D. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00504 · Cited by 523
Efficient hole-blocking layer-free planar halide perovskite thin-film solar cells
Ke, W., Fang, G., Wan, J., Tao, H., Liu, Q., Xiong, L., Qin, P., Wang, J., Lei, H., Yang, G., et al. (2015) · Nature Communications · doi:10.1038/ncomms7700 · Cited by 420
Real-Time Observation of Organic Cation Reorientation in Methylammonium Lead Iodide Perovskites
Bakulin, A. A., Selig, O., Bakker, H. J., Rezus, Y. L. A., Müller, C., Glaser, T., Lovrincic, R., Sun, Z., Chen, Z., Walsh, A., et al. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01555 · Cited by 372
Solution Chemistry Engineering toward High-Efficiency Perovskite Solar Cells
Zhao, Y., & Zhu, K. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz501983v · Cited by 257
Self-citationTemperature dependent energy levels of methylammonium lead iodide perovskite
Foley, B. J., Marlowe, D. L., Sun, K., Saidi, W. A., Scudiero, L., Gupta, M. C., & Choi, J. J. (2015) · Applied Physics Letters · doi:10.1063/1.4922804 · Cited by 195
Cited by
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Metadata
- Authors
- Li, Z., Yang, M., Park, J.-S., Wei, S.-H., Berry, J. J., & Zhu, K.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-30
- Volume
- 28
- Issue
- 1
- Pages
- 284-292
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2216495470
- Cited by
- 2,269
- References
- 34
- FWCI
- 61.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.