The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Stabilizing Perovskite Structures by Tuning Tolerance Factor: Formation of Formamidinium and Cesium Lead Iodide Solid-State Alloys
Abstract
Goldschmidt tolerance factor ( t ) is an empirical index for predicting stable crystal structures of perovskite materials. A t value between 0.8 and 1.0 is favorable for cubic perovskite structure, and larger (>1) or smaller (<0.8) values of tolerance factor usually result in nonperovskite structures. CH(NH 2 ) 2 PbI 3 (FAPbI 3 ) can exist in the perovskite α-phase (black phase) with good photovoltaic properties. However, it has a large tolerance factor and is more stable in the hexagonal δ H -phase (yellow phase), with δ H -to-α phase-transition temperature higher than room temperature. On the other hand, CsPbI 3 is stabilized to an orthorhombic structure (δ O -phase) at room temperature due to its small tolerance factor. We find that, by alloying FAPbI 3 with CsPbI 3, the effective tolerance factor can be tuned, and the stability of the photoactive α-phase of the mixed solid-state perovskite alloys FA 1– x Cs x PbI 3 is enhanced, which is in agreement with our first-principles calculations. Thin films of the FA 0.85 Cs 0.15 PbI 3 perovskite alloy demonstrate much improved stability in a high-humidity environment; this contrasts significantly with the pure FAPbI 3 film for which the α-to-δ H phase transition (associated with yellowing appearance) is accelerated by humidity environment. Due to phase stabilization, the FA 0.85 Cs 0.15 PbI 3 solid-state alloy showed better solar cell performance and device stability than its FAPbI 3 counterparts. Our studies suggest that tuning the tolerance factor through solid-state alloying can be a general strategy to stabilize the desired perovskite structure for solar cell applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Long-Range Balanced Electron- and Hole-Transport Lengths in Organic-Inorganic CH 3 NH 3 PbI 3
Xing, G., Mathews, N., Sun, S., Lim, S. S., Lam, Y. M., Grätzel, M., Mhaisalkar, S., & Sum, T. C. (2013) · Science · doi:10.1126/science.1243167 · Cited by 6,909
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Noh, J. H., Im, S. H., Heo, J. H., Mandal, T. N., & Seok, S. I. (2013) · Nano Letters · doi:10.1021/nl400349b · Cited by 4,829
Die Gesetze der Krystallochemie
Goldschmidt, V. M. (1926) · Die Naturwissenschaften · doi:10.1007/bf01507527 · Cited by 4,012
A hole-conductor–free, fully printable mesoscopic perovskite solar cell with high stability
Mei, A., Li, X., Liu, L., Ku, Z., Liu, T., Rong, Y., Xu, M., Hu, M., Chen, J., Yang, Y., et al. (2014) · Science · doi:10.1126/science.1254763 · Cited by 3,043
Atomistic Origins of High-Performance in Hybrid Halide Perovskite Solar Cells
Frost, J. M., Butler, K. T., Brivio, F., Hendon, C. H., van Schilfgaarde, M., & Walsh, A. (2014) · Nano Letters · doi:10.1021/nl500390f · Cited by 2,425
Cited by
Saliba, M., Matsui, T., Seo, J.-Y., Domanski, K., Correa-Baena, J.-P., Nazeeruddin, M. K., Zakeeruddin, S. M., Tress, W., Abate, A., Hagfeldt, A., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03874j · Cited by 5,440
Surface passivation of perovskite film for efficient solar cells
Jiang, Q., Zhao, Y., Zhang, X., Yang, X., Chen, Y., Chu, Z., Ye, Q., Li, X., Yin, Z., & You, J. (2019) · Nature Photonics · doi:10.1038/s41566-019-0398-2 · Cited by 4,736
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Saliba, M., Matsui, T., Domanski, K., Seo, J.-Y., Ummadisingu, A., Zakeeruddin, S. M., Correa-Baena, J.-P., Tress, W. R., Abate, A., Hagfeldt, A., et al. (2016) · Science · doi:10.1126/science.aah5557 · Cited by 3,706
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Tan, H., Jain, A., Voznyy, O., Lan, X., García de Arquer, F. P., Fan, J. Z., Quintero-Bermudez, R., Yuan, M., Zhang, B., Zhao, Y., et al. (2017) · Science · doi:10.1126/science.aai9081 · Cited by 2,342
Promises and challenges of perovskite solar cells
Correa-Baena, J.-P., Saliba, M., Buonassisi, T., Grätzel, M., Abate, A., Tress, W., & Hagfeldt, A. (2017) · Science · doi:10.1126/science.aam6323 · Cited by 2,221
Intriguing Optoelectronic Properties of Metal Halide Perovskites
Manser, J. S., Christians, J. A., & Kamat, P. V. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00136 · Cited by 2,020
Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics
Boyd, C. C., Cheacharoen, R., Leijtens, T., & McGehee, M. D. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00336 · Cited by 1,777
Two-Dimensional Hybrid Halide Perovskites: Principles and Promises
Mao, L., Stoumpos, C. C., & Kanatzidis, M. G. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.8b10851 · Cited by 1,584
Perovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Charge-Carrier Mobilities in Metal Halide Perovskites: Fundamental Mechanisms and Limits
Herz, L. M. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00276 · Cited by 1,402
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide
Min, H., Kim, M., Lee, S.-U., Kim, H., Kim, G., Choi, K., Lee, J. H., & Seok, S. I. (2019) · Science · doi:10.1126/science.aay7044 · Cited by 1,268
Lead Halide Perovskite Nanocrystals in the Research Spotlight: Stability and Defect Tolerance
Huang, H., Bodnarchuk, M. I., Kershaw, S. V., Kovalenko, M. V., & Rogach, A. L. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00547 · Cited by 1,236
Scalable fabrication of perovskite solar cells
Li, Z., Klein, T. R., Kim, D. H., Yang, M., Berry, J. J., van Hest, M. F. A. M., & Zhu, K. (2018) · Nature Reviews Materials · doi:10.1038/natrevmats.2018.17 · Cited by 1,166
Self-citationCesium Lead Halide Perovskites with Improved Stability for Tandem Solar Cells
Beal, R. E., Slotcavage, D. J., Leijtens, T., Bowring, A. R., Belisle, R. A., Nguyen, W. H., Burkhard, G. F., Hoke, E. T., & McGehee, M. D. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00002 · Cited by 1,136
Opportunities and challenges for tandem solar cells using metal halide perovskite semiconductors
Leijtens, T., Bush, K. A., Prasanna, R., & McGehee, M. D. (2018) · Nature Energy · doi:10.1038/s41560-018-0190-4 · Cited by 1,121
Triple-halide wide–band gap perovskites with suppressed phase segregation for efficient tandems
Xu, J., Boyd, C. C., Yu, Z. J., Palmstrom, A. F., Witter, D. J., Larson, B. W., France, R. M., Werner, J., Harvey, S. P., Wolf, E. J., et al. (2020) · Science · doi:10.1126/science.aaz5074 · Cited by 1,080
Self-citationMethylammonium-free, high-performance, and stable perovskite solar cells on a planar architecture
Turren-Cruz, S.-H., Hagfeldt, A., & Saliba, M. (2018) · Science · doi:10.1126/science.aat3583 · Cited by 1,055
Design of Lead-Free Inorganic Halide Perovskites for Solar Cells via Cation-Transmutation
Zhao, X.-G., Yang, J.-H., Fu, Y., Yang, D., Xu, Q., Yu, L., Wei, S.-H., & Zhang, L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b09645 · Cited by 1,003
Self-citationUniversal Approach toward Hysteresis-Free Perovskite Solar Cell via Defect Engineering
Son, D.-Y., Kim, S.-G., Seo, J.-Y., Lee, S.-H., Shin, H., Lee, D., & Park, N.-G. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.7b10430 · Cited by 891
Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability
Christians, J. A., Schulz, P., Tinkham, J. S., Schloemer, T. H., Harvey, S. P., Tremolet de Villers, B. J., Sellinger, A., Berry, J. J., & Luther, J. M. (2018) · Nature Energy · doi:10.1038/s41560-017-0067-y · Cited by 828
Self-citationAdditive Engineering for Efficient and Stable Perovskite Solar Cells
Zhang, F., & Zhu, K. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902579 · Cited by 805
Self-citationHomogenizing out-of-plane cation composition in perovskite solar cells
Liang, Z., Zhang, Y., Xu, H., Chen, W., Liu, B., Zhang, J., Zhang, H., Wang, Z., Kang, D.-H., Zeng, J., et al. (2023) · Nature · doi:10.1038/s41586-023-06784-0 · Cited by 791
Chemical stability and instability of inorganic halide perovskites
Zhou, Y., & Zhao, Y. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03559h · Cited by 784
Saidaminov, M. I., Kim, J., Jain, A., Quintero-Bermudez, R., Tan, H., Long, G., Tan, F., Johnston, A., Zhao, Y., Voznyy, O., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0192-2 · Cited by 751
Long-term operating stability in perovskite photovoltaics
Zhu, H., Teale, S., Lintangpradipto, M. N., Mahesh, S., Chen, B., McGehee, M. D., Sargent, E. H., & Bakr, O. M. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00582-w · Cited by 739
Xiao, Z., Meng, W., Wang, J., Mitzi, D. B., & Yan, Y. (2017) · Materials Horizons · doi:10.1039/c6mh00519e · Cited by 735
Li, X., Cao, F., Yu, D., Chen, J., Sun, Z., Shen, Y., Zhu, Y., Wang, L., Wei, Y., Wu, Y., et al. (2017) · Small · doi:10.1002/smll.201603996 · Cited by 704
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
A piperidinium salt stabilizes efficient metal-halide perovskite solar cells
Lin, Y.-H., Sakai, N., Da, P., Wu, J., Sansom, H. C., Ramadan, A. J., Mahesh, S., Liu, J., Oliver, R. D. J., Lim, J., et al. (2020) · Science · doi:10.1126/science.aba1628 · Cited by 666
Thermal unequilibrium of strained black CsPbI 3 thin films
Steele, J. A., Jin, H., Dovgaliuk, I., Berger, R. F., Braeckevelt, T., Yuan, H., Martin, C., Solano, E., Lejaeghere, K., Rogge, S. M. J., et al. (2019) · Science · doi:10.1126/science.aax3878 · Cited by 661
Zhang, T., Dar, M. I., Li, G., Xu, F., Guo, N., Grätzel, M., & Zhao, Y. (2017) · Science Advances · doi:10.1126/sciadv.1700841 · Cited by 647
Wang, P., Zhang, X., Zhou, Y., Jiang, Q., Ye, Q., Chu, Z., Li, X., Yang, X., Yin, Z., & You, J. (2018) · Nature Communications · doi:10.1038/s41467-018-04636-4 · Cited by 637
Towards commercialization: the operational stability of perovskite solar cells
Li, N., Niu, X., Chen, Q., & Zhou, H. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00573h · Cited by 633
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Advances in two-dimensional organic–inorganic hybrid perovskites
Zhang, F., Lu, H., Tong, J., Berry, J. J., Beard, M. C., & Zhu, K. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03757h · Cited by 627
Self-citationRehman, W., McMeekin, D. P., Patel, J. B., Milot, R. L., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03014a · Cited by 612
Fu, Y., Zhu, H., Stoumpos, C. C., Ding, Q., Wang, J., Kanatzidis, M. G., Zhu, X., & Jin, S. (2016) · ACS Nano · doi:10.1021/acsnano.6b03916 · Cited by 610
Trapped charge-driven degradation of perovskite solar cells
Ahn, N., Kwak, K., Jang, M. S., Yoon, H., Lee, B. Y., Lee, J.-K., Pikhitsa, P. V., Byun, J., & Choi, M. (2016) · Nature Communications · doi:10.1038/ncomms13422 · Cited by 606
Stability of Perovskite Solar Cells: A Prospective on the Substitution of the A Cation and X Anion
Wang, Z., Shi, Z., Li, T., Chen, Y., & Huang, W. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201603694 · Cited by 595
Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions
Ono, L. K., Juarez-Perez, E. J., & Qi, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06001 · Cited by 593
Hao, M., Bai, Y., Zeiske, S., Ren, L., Liu, J., Yuan, Y., Zarrabi, N., Cheng, N., Ghasemi, M., Chen, P., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0535-7 · Cited by 587
Detection of gamma photons using solution-grown single crystals of hybrid lead halide perovskites
Yakunin, S., Dirin, D. N., Shynkarenko, Y., Morad, V., Cherniukh, I., Nazarenko, O., Kreil, D., Nauser, T., & Kovalenko, M. V. (2016) · Nature Photonics · doi:10.1038/nphoton.2016.139 · Cited by 570
Progress of Lead‐Free Halide Double Perovskites
Igbari, F., Wang, Z., & Liao, L. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201803150 · Cited by 562
Halide Perovskites: Is It All about the Interfaces?
Schulz, P., Cahen, D., & Kahn, A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00558 · Cited by 558
Rethinking the A cation in halide perovskites
Lee, J.-W., Tan, S., Seok, S. I., Yang, Y., & Park, N.-G. (2022) · Science · doi:10.1126/science.abj1186 · Cited by 557
Swarnkar, A., Mir, W. J., & Nag, A. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01197 · Cited by 554
Bismuth Incorporation Stabilized α-CsPbI3 for Fully Inorganic Perovskite Solar Cells
Hu, Y., Bai, F., Liu, X., Ji, Q., Miao, X., Qiu, T., & Zhang, S. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00508 · Cited by 547
Perovskite Solar Cells: From the Atomic Level to Film Quality and Device Performance
Saliba, M., Correa‐Baena, J., Grätzel, M., Hagfeldt, A., & Abate, A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201703226 · Cited by 545
Protesescu, L., Yakunin, S., Kumar, S., Bär, J., Bertolotti, F., Masciocchi, N., Guagliardi, A., Grotevent, M., Shorubalko, I., Bodnarchuk, M. I., et al. (2017) · ACS Nano · doi:10.1021/acsnano.7b00116 · Cited by 534
Recent progress in flexible–wearable solar cells for self-powered electronic devices
Hashemi, S. A., Ramakrishna, S., & Aberle, A. G. (2020) · Energy & Environmental Science · doi:10.1039/c9ee03046h · Cited by 527
Nam, J. K., Chai, S. U., Cha, W., Choi, Y. J., Kim, W., Jung, M. S., Kwon, J., Kim, D., & Park, J. H. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b00050 · Cited by 524
Self-citationDuong, T., Wu, Y., Shen, H., Peng, J., Fu, X., Jacobs, D., Wang, E., Kho, T. C., Fong, K. C., Stocks, M., et al. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201700228 · Cited by 519
Kang, D., & Park, N. (2019) · Advanced Materials · doi:10.1002/adma.201805214 · Cited by 498
Enabling Flexible All-Perovskite Tandem Solar Cells
Palmstrom, A. F., Eperon, G. E., Leijtens, T., Prasanna, R., Habisreutinger, S. N., Nemeth, W., Gaulding, E. A., Dunfield, S. P., Reese, M., Nanayakkara, S., et al. (2019) · Joule · doi:10.1016/j.joule.2019.05.009 · Cited by 493
Self-citationImpact of H2O on organic–inorganic hybrid perovskite solar cells
Huang, J., Tan, S., Lund, P. D., & Zhou, H. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01674c · Cited by 489
Gas chromatography–mass spectrometry analyses of encapsulated stable perovskite solar cells
Shi, L., Bucknall, M. P., Young, T. L., Zhang, M., Hu, L., Bing, J., Lee, D. S., Kim, J., Wu, T., Takamure, N., et al. (2020) · Science · doi:10.1126/science.aba2412 · Cited by 488
Inverted Perovskite Solar Cells: Progresses and Perspectives
Liu, T., Chen, K., Hu, Q., Zhu, R., & Gong, Q. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600457 · Cited by 483
Bush, K. A., Frohna, K., Prasanna, R., Beal, R. E., Leijtens, T., Swifter, S. A., & McGehee, M. D. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01255 · Cited by 480
Recent progress in tin-based perovskite solar cells
Cao, J., & Yan, F. (2021) · Energy & Environmental Science · doi:10.1039/d0ee04007j · Cited by 479
Lai, H., Kan, B., Liu, T., Zheng, N., Xie, Z., Zhou, T., Wan, X., Zhang, X., Liu, Y., & Chen, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04604 · Cited by 477
Ju, M.-G., Chen, M., Zhou, Y., Garces, H. F., Dai, J., Ma, L., Padture, N. P., & Zeng, X. C. (2018) · ACS Energy Letters · doi:10.1021/acsenergylett.7b01167 · Cited by 476
Improved Phase Stability of Formamidinium Lead Triiodide Perovskite by Strain Relaxation
Zheng, X., Wu, C., Jha, S. K., Li, Z., Zhu, K., & Priya, S. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00457 · Cited by 474
Self-citationImproving the Stability of Metal Halide Perovskite Materials and Light‐Emitting Diodes
Cho, H., Kim, Y., Wolf, C., Lee, H., & Lee, T. (2018) · Advanced Materials · doi:10.1002/adma.201704587 · Cited by 470
Improving the Stability of Metal Halide Perovskite Quantum Dots by Encapsulation
Lv, W., Li, L., Xu, M., Hong, J., Tang, X., Xu, L., Wu, Y., Zhu, R., Chen, R., & Huang, W. (2019) · Advanced Materials · doi:10.1002/adma.201900682 · Cited by 462
Roadmap and roadblocks for the band gap tunability of metal halide perovskites
Unger, E. L., Kegelmann, L., Suchan, K., Sörell, D., Korte, L., & Albrecht, S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta00404d · Cited by 452
A roadmap for the commercialization of perovskite light emitters
Han, T.-H., Jang, K. Y., Dong, Y., Friend, R. H., Sargent, E. H., & Lee, T.-W. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00459-4 · Cited by 449
Dunfield, S. P., Bliss, L., Zhang, F., Luther, J. M., Zhu, K., van Hest, M. F. A. M., Reese, M. O., & Berry, J. J. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201904054 · Cited by 435
Self-citationPerovskite/Silicon Tandem Solar Cells: Marriage of Convenience or True Love Story? – An Overview
Werner, J., Niesen, B., & Ballif, C. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201700731 · Cited by 431
Cu–In Halide Perovskite Solar Absorbers
Zhao, X.-G., Yang, D., Sun, Y., Li, T., Zhang, L., Yu, L., & Zunger, A. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b02120 · Cited by 428
Metal Halide Perovskite Light‐Emitting Devices: Promising Technology for Next‐Generation Displays
Lu, M., Zhang, Y., Wang, S., Guo, J., Yu, W. W., & Rogach, A. L. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201902008 · Cited by 425
A Review on Additives for Halide Perovskite Solar Cells
Liu, S., Guan, Y., Sheng, Y., Hu, Y., Rong, Y., Mei, A., & Han, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.201902492 · Cited by 425
The Potential of Multijunction Perovskite Solar Cells
Hörantner, M. T., Leijtens, T., Ziffer, M. E., Eperon, G. E., Christoforo, M. G., McGehee, M. D., & Snaith, H. J. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00647 · Cited by 412
Wheeler, L. M., Sanehira, E. M., Marshall, A. R., Schulz, P., Suri, M., Anderson, N. C., Christians, J. A., Nordlund, D., Sokaras, D., Kroll, T., et al. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b04984 · Cited by 412
Self-citationChen, W., Zhou, Y., Wang, L., Wu, Y., Tu, B., Yu, B., Liu, F., Tam, H., Wang, G., Djurišić, A. B., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800515 · Cited by 411
Jiang, J., Xiong, M., Fan, K., Bao, C., Xin, D., Pan, Z., Fei, L., Huang, H., Zhou, L., Yao, K., et al. (2022) · Nature Photonics · doi:10.1038/s41566-022-01024-9 · Cited by 411
Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability
Tian, J., Xue, Q., Tang, X., Chen, Y., Li, N., Hu, Z., Shi, T., Wang, X., Huang, F., Brabec, C. J., et al. (2019) · Advanced Materials · doi:10.1002/adma.201901152 · Cited by 398
Development of encapsulation strategies towards the commercialization of perovskite solar cells
Ma, S., Yuan, G., Zhang, Y., Yang, N., Li, Y., & Chen, Q. (2022) · Energy & Environmental Science · doi:10.1039/d1ee02882k · Cited by 395
Achievements, challenges, and future prospects for industrialization of perovskite solar cells
Yang, C., Hu, W., Liu, J., Han, C., Gao, Q., Mei, A., Zhou, Y., Guo, F., & Han, H. (2024) · Light: Science & Applications · doi:10.1038/s41377-024-01461-x · Cited by 388
Kubicki, D. J., Prochowicz, D., Hofstetter, A., Zakeeruddin, S. M., Grätzel, M., & Emsley, L. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07223 · Cited by 387
Xiang, W., Liu, S. (., & Tress, W. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00157d · Cited by 386
Liu, F., Ding, C., Zhang, Y., Ripolles, T. S., Kamisaka, T., Toyoda, T., Hayase, S., Minemoto, T., Yoshino, K., Dai, S., et al. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b08628 · Cited by 385
Humidity‐Induced Degradation via Grain Boundaries of HC(NH2)2PbI3 Planar Perovskite Solar Cells
Yun, J. S., Kim, J., Young, T., Patterson, R. J., Kim, D., Seidel, J., Lim, S., Green, M. A., Huang, S., & Ho‐Baillie, A. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705363 · Cited by 382
Thermodynamic Stability Trend of Cubic Perovskites
Sun, Q., & Yin, W.-J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b09379 · Cited by 377
Inorganic Halide Perovskite Solar Cells: Progress and Challenges
Tian, J., Xue, Q., Yao, Q., Li, N., Brabec, C. J., & Yip, H. (2020) · Advanced Energy Materials · doi:10.1002/aenm.202000183 · Cited by 372
Hoffman, J. B., Schleper, A. L., & Kamat, P. V. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04661 · Cited by 371
Passarelli, J. V., Fairfield, D. J., Sather, N. A., Hendricks, M. P., Sai, H., Stern, C. L., & Stupp, S. I. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03659 · Cited by 365
Homogenized halides and alkali cation segregation in alloyed organic-inorganic perovskites
Correa-Baena, J.-P., Luo, Y., Brenner, T. M., Snaider, J., Sun, S., Li, X., Jensen, M. A., Hartono, N. T. P., Nienhaus, L., Wieghold, S., et al. (2019) · Science · doi:10.1126/science.aah5065 · Cited by 364
From scalable solution fabrication of perovskite films towards commercialization of solar cells
Huang, F., Li, M., Siffalovic, P., Cao, G., & Tian, J. (2019) · Energy & Environmental Science · doi:10.1039/c8ee03025a · Cited by 351
Inorganic CsPbI3 Perovskite‐Based Solar Cells: A Choice for a Tandem Device
Ahmad, W., Khan, J., Niu, G., & Tang, J. (2017) · Solar RRL · doi:10.1002/solr.201700048 · Cited by 350
Stabilization of Black Perovskite Phase in FAPbI3 and CsPbI3
Masi, S., Gualdrón-Reyes, A. F., & Mora-Seró, I. (2020) · ACS Energy Letters · doi:10.1021/acsenergylett.0c00801 · Cited by 347
Qin, M., Chan, P. F., & Lu, X. (2021) · Advanced Materials · doi:10.1002/adma.202105290 · Cited by 337
Deng, Y., Xu, S., Chen, S., Xiao, X., Zhao, J., & Huang, J. (2021) · Nature Energy · doi:10.1038/s41560-021-00831-8 · Cited by 331
Mohd Yusoff, A. R. B., Vasilopoulou, M., Georgiadou, D. G., Palilis, L. C., Abate, A., & Nazeeruddin, M. K. (2021) · Energy & Environmental Science · doi:10.1039/d1ee00062d · Cited by 327
Niu, T., Zhu, W., Zhang, Y., Xue, Q., Jiao, X., Wang, Z., Xie, Y.-M., Li, P., Chen, R., Huang, F., et al. (2021) · Joule · doi:10.1016/j.joule.2020.12.003 · Cited by 320
Over 21% Efficiency Stable 2D Perovskite Solar Cells
Shao, M., Bie, T., Yang, L., Gao, Y., Jin, X., He, F., Zheng, N., Yu, Y., & Zhang, X. (2022) · Advanced Materials · doi:10.1002/adma.202107211 · Cited by 316
Lead-Free Mixed Tin and Germanium Perovskites for Photovoltaic Application
Ju, M.-G., Dai, J., Ma, L., & Zeng, X. C. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b04219 · Cited by 314
Turren-Cruz, S.-H., Saliba, M., Mayer, M. T., Juárez-Santiesteban, H., Mathew, X., Nienhaus, L., Tress, W., Erodici, M. P., Sher, M.-J., Bawendi, M. G., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02901b · Cited by 311
Metadata
- Authors
- Li, Z., Yang, M., Park, J.-S., Wei, S.-H., Berry, J. J., & Zhu, K.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-30
- Volume
- 28
- Issue
- 1
- Pages
- 284-292
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2216495470
- Cited by
- 2,269
- References
- 34
- FWCI
- 61.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.