The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Removal of Residual Diiodooctane Improves Photostability of High-Performance Organic Solar Cell Polymers
Abstract
Solvent additives such as diiodooctane (DIO) are becoming ubiquitous in processing high performance organic photovoltaic (OPV) active layers. Here, we investigate the effects of DIO on the long-term stability of the active layer by studying the photodegradation under ambient white light illumination of the polymer PTB7-Th in pure polymer thin films and in blend films with PC 71 BM. Using X-ray fluorescence, we directly detect iodine in the active layer films, indicating the presence of residual DIO after casting from solution. Additionally, we show that this residual DIO dramatically decreases the photostability of the active layer. Structural changes in the films upon illumination are probed with grazing-incidence wide-angle X-ray scattering (GIWAXS). FTIR spectroscopy is used to monitor chemical changes in the polymer structure during irradiation in the presence of DIO. Furthermore, we demonstrate that film treatment either with high vacuum (10 –8 Torr) for 60 min or with a high-temperature thermal anneal at 175 °C for 30 min removes residual DIO from the film and delays photodegradation. Therefore, when processing polymer solar cells with DIO-containing solutions, it is imperative to remove any trace amounts of DIO from deposited films.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yu, G., Gao, J., Hummelen, J. C., Wudl, F., & Heeger, A. J. (1995) · Science · doi:10.1126/science.270.5243.1789 · Cited by 10,348
Liang, Y., Xu, Z., Xia, J., Tsai, S., Wu, Y., Li, G., Ray, C., & Yu, L. (2010) · Advanced Materials · doi:10.1002/adma.200903528 · Cited by 3,649
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
A general relationship between disorder, aggregation and charge transport in conjugated polymers
Noriega, R., Rivnay, J., Vandewal, K., Koch, F. P. V., Stingelin, N., Smith, P., Toney, M. F., & Salleo, A. (2013) · Nature Materials · doi:10.1038/nmat3722 · Cited by 2,206
Rivnay, J., Mannsfeld, S. C. B., Miller, C. E., Salleo, A., & Toney, M. F. (2012) · Chemical Reviews · doi:10.1021/cr3001109 · Cited by 1,419
Stability of Polymer Solar Cells
Jørgensen, M., Norrman, K., Gevorgyan, S. A., Tromholt, T., Andreasen, B., & Krebs, F. C. (2012) · Advanced Materials · doi:10.1002/adma.201104187 · Cited by 1,366
Liao, S., Jhuo, H., Cheng, Y., & Chen, S. (2013) · Advanced Materials · doi:10.1002/adma.201301476 · Cited by 1,259
Organic photovoltaics: technology and market
Brabec, C. J. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.02.030 · Cited by 1,152
Consensus stability testing protocols for organic photovoltaic materials and devices
Reese, M. O., Gevorgyan, S. A., Jørgensen, M., Bundgaard, E., Kurtz, S. R., Ginley, D. S., Olson, D. C., Lloyd, M. T., Morvillo, P., Katz, E. A., et al. (2011) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2011.01.036 · Cited by 989
Self-citationInterdiffusion of PCBM and P3HT Reveals Miscibility in a Photovoltaically Active Blend
Treat, N. D., Brady, M. A., Smith, G., Toney, M. F., Kramer, E. J., Hawker, C. J., & Chabinyc, M. L. (2011) · Advanced Energy Materials · doi:10.1002/aenm.201000023 · Cited by 612
Self-citationLou, S. J., Szarko, J. M., Xu, T., Yu, L., Marks, T. J., & Chen, L. X. (2011) · Journal of the American Chemical Society · doi:10.1021/ja2085564 · Cited by 539
Additives for morphology control in high-efficiency organic solar cells
Liao, H.-C., Ho, C.-C., Chang, C.-Y., Jao, M.-H., Darling, S. B., & Su, W.-F. (2013) · Materials Today · doi:10.1016/j.mattod.2013.08.013 · Cited by 535
Solar cell efficiency tables (version 46)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2637 · Cited by 528
High‐Efficiency Polymer Solar Cells Enhanced by Solvent Treatment
Zhou, H., Zhang, Y., Seifter, J., Collins, S. D., Luo, C., Bazan, G. C., Nguyen, T., & Heeger, A. J. (2013) · Advanced Materials · doi:10.1002/adma.201204306 · Cited by 492
Bartelt, J. A., Beiley, Z. M., Hoke, E. T., Mateker, W. R., Douglas, J. D., Collins, B. A., Tumbleston, J. R., Graham, K. R., Amassian, A., Ade, H., et al. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201200637 · Cited by 445
Chen, W., Xu, T., He, F., Wang, W., Wang, C., Strzalka, J., Liu, Y., Wen, J., Miller, D. J., Chen, J., et al. (2011) · Nano Letters · doi:10.1021/nl201715q · Cited by 424
Yin, W., & Dadmun, M. (2011) · ACS Nano · doi:10.1021/nn200744q · Cited by 314
Photoinduced Degradation of Polymer and Polymer–Fullerene Active Layers: Experiment and Theory
Reese, M. O., Nardes, A. M., Rupert, B. L., Larsen, R. E., Olson, D. C., Lloyd, M. T., Shaheen, S. E., Ginley, D. S., Rumbles, G., & Kopidakis, N. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001079 · Cited by 276
Self-citationMethod for increasing the photoconductive response in conjugated polymer/fullerene composites
Peet, J., Soci, C., Coffin, R. C., Nguyen, T., Mikhailovsky, A. A., Moses, D. J., & Bazan, G. C. (2006) · Applied Physics Letters · doi:10.1063/1.2408661 · Cited by 260
Photochemical stability of π-conjugated polymers for polymer solar cells: a rule of thumb
Manceau, M., Bundgaard, E., Carlé, J. E., Hagemann, O., Helgesen, M., Søndergaard, R., Jørgensen, M., & Krebs, F. C. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03105d · Cited by 253
Ye, L., Jing, Y., Guo, X., Sun, H., Zhang, S., Zhang, M., Huo, L., & Hou, J. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp404395q · Cited by 232
Understanding the Morphology of PTB7:PCBM Blends in Organic Photovoltaics
Liu, F., Zhao, W., Tumbleston, J. R., Wang, C., Gu, Y., Wang, D., Briseno, A. L., Ade, H., & Russell, T. P. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201301377 · Cited by 224
Detection and role of trace impurities in high-performance organic solar cells
Nikiforov, M. P., Lai, B., Chen, W., Chen, S., Schaller, R. D., Strzalka, J., Maser, J., & Darling, S. B. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40556g · Cited by 181
On the role of intermixed phases in organic photovoltaic blends
Westacott, P., Tumbleston, J. R., Shoaee, S., Fearn, S., Bannock, J. H., Gilchrist, J. B., Heutz, S., deMello, J., Heeney, M., Ade, H., et al. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41821a · Cited by 169
Photochemical stability of high efficiency PTB7:PC 70 BM solar cell blends
Hollis, J. R., Wade, J., Tsoi, W. C., Soon, Y. W., Durrant, J. R., & Kim, J. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05641h · Cited by 157
Degradation and stability of polymer-based solar cells
Lee, J. U., Jung, J. W., Jo, J. W., & Jo, W. H. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm33645f · Cited by 143
Top‐Down Approach for Nanophase Reconstruction in Bulk Heterojunction Solar Cells
Kong, J., Hwang, I., & Lee, K. (2014) · Advanced Materials · doi:10.1002/adma.201402182 · Cited by 126
Photostability of organic materials used in polymer solar cells
Rivaton, A., Tournebize, A., Gaume, J., Bussière, P., Gardette, J., & Thérias, S. (2013) · Polymer International · doi:10.1002/pi.4656 · Cited by 117
Richter, L. J., DeLongchamp, D. M., Bokel, F. A., Engmann, S., Chou, K. W., Amassian, A., Schaible, E. G., & Hexemer, A. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201400975 · Cited by 110
X‐ray Scattering from Films of Semiconducting Polymers
Chabinyc, M. L. (2008) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583720802231734 · Cited by 107
Self-citationLight-induced degradation of the P3HT-based solar cells active layer
Manceau, M., Rivaton, A., Gardette, J., Guillerez, S., & Lemaître, N. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2010.09.021 · Cited by 107
Involvement of Singlet Oxygen in the Solid‐State Photochemistry of P3HT
Manceau, M., Rivaton, A., & Gardette, J. (2008) · Macromolecular Rapid Communications · doi:10.1002/marc.200800421 · Cited by 99
Nam, S., Jang, J., Cha, H., Hwang, J., An, T. K., Park, S., & Park, C. E. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15260f · Cited by 82
Correlating dilute solvent interactions to morphology and OPV device performance
Chang, L., Jacobs, I. E., Augustine, M. P., & Moulé, A. J. (2013) · Organic Electronics · doi:10.1016/j.orgel.2013.06.016 · Cited by 35
Cited by
Baran, D., Ashraf, R. S., Hanifi, D. A., Abdelsamie, M., Gasparini, N., Röhr, J. A., Holliday, S., Wadsworth, A., Lockett, S., Neophytou, M., et al. (2017) · Nature Materials · doi:10.1038/nmat4797 · Cited by 1,027
Wadsworth, A., Moser, M., Marks, A., Little, M. S., Gasparini, N., Brabec, C. J., Baran, D., & McCulloch, I. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00892a · Cited by 986
Solvent Additives: Key Morphology‐Directing Agents for Solution‐Processed Organic Solar Cells
McDowell, C., Abdelsamie, M., Toney, M. F., & Bazan, G. C. (2018) · Advanced Materials · doi:10.1002/adma.201707114 · Cited by 513
Bulk‐Heterojunction Organic Solar Cells: Five Core Technologies for Their Commercialization
Kang, H., Kim, G., Kim, J., Kwon, S., Kim, H., & Lee, K. (2016) · Advanced Materials · doi:10.1002/adma.201601197 · Cited by 489
Jinno, H., Fukuda, K., Xu, X., Park, S., Suzuki, Y., Koizumi, M., Yokota, T., Osaka, I., Takimiya, K., & Someya, T. (2017) · Nature Energy · doi:10.1038/s41560-017-0001-3 · Cited by 471
Metadata
- Authors
- Tremolet de Villers, B. J., O’Hara, K. A., Ostrowski, D. P., Biddle, P. H., Shaheen, S. E., Chabinyc, M. L., Olson, D. C., & Kopidakis, N.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-01-19
- Volume
- 28
- Issue
- 3
- Pages
- 876-884
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2341477036
- Cited by
- 277
- References
- 34
- FWCI
- 20.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.