The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Role of the Dopants on the Morphological and Transport Properties of Spiro-MeOTAD Hole Transport Layer
Open accessAbstract
The use of a solid hole transport layer (HTL) was transformational for the recent perovskite solar cell (PSC) revolution in solar energy technology. Often high efficiency PSC devices employ heavily doped hole transport materials such as spiro-MeOTAD. Independent of HTL chemistry, lithium-bis-trifluoromethanesulfonyl-imide (LiTFSI) and tert-butylpyridine (TBP) are commonly used as additives in HTL formulations for PSCs. LiTFSI and TBP were originally optimized for dye-sensitized solar cells, where their roles have been extensively studied. However, in the case of PSCs, the function of TBP is not clearly understood. In this study, properties of the HTL composite deposited on flat silicon substrates were systematically measured at several length scales, e.g., macroscopically (profilometry, 4-point probe conductivity, and thermogravimetry-differential thermal analysis), microscopically, and at the nanoscale to investigate film morphology, conductivity, and dopant distribution. Microscopic distributions of spiro-MeOTAD, LiTFSI, and TBP were determined using 2D Fourier transform infrared (FTIR) microscopy and electrostatic atomic force microscopy (EFM). Our findings reveal that the main role of TBP is to prevent phase segregation of LiTFSI and spiro-MeOTAD, resulting in a homogeneous hole transport layer. These properties are critical for charge transport in the HTL bulk film as well as at the perovskite/HTL and HTL/electrode interfaces and for efficient solar cell performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Grimme, S., Antony, J., Ehrlich, S., & Krieg, H. (2010) · The Journal of Chemical Physics · doi:10.1063/1.3382344 · Cited by 59,686
Weigend, F., & Ahlrichs, R. (2005) · Physical Chemistry Chemical Physics · doi:10.1039/b508541a · Cited by 30,598
Effect of the damping function in dispersion corrected density functional theory
Grimme, S., Ehrlich, S., & Goerigk, L. (2011) · Journal of Computational Chemistry · doi:10.1002/jcc.21759 · Cited by 28,221
Neese, F. (2012) · WIREs Computational Molecular Science · doi:10.1002/wcms.81 · Cited by 13,466
Fully optimized contracted Gaussian basis sets for atoms Li to Kr
Schäfer, A., Horn, H., & Ahlrichs, R. (1992) · The Journal of Chemical Physics · doi:10.1063/1.463096 · Cited by 9,610
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Burschka, J., Pellet, N., Moon, S.-J., Humphry-Baker, R., Gao, P., Nazeeruddin, M. K., & Grätzel, M. (2013) · Nature · doi:10.1038/nature12340 · Cited by 9,547
Kim, H.-S., Lee, C.-R., Im, J.-H., Lee, K.-B., Moehl, T., Marchioro, A., Moon, S.-J., Humphry-Baker, R., Yum, J.-H., Moser, J. E., et al. (2012) · Scientific Reports · doi:10.1038/srep00591 · Cited by 8,092
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Nazeeruddin, M. K., Kay, A., Rodicio, I., Humphry-Baker, R., Mueller, E., Liska, P., Vlachopoulos, N., & Graetzel, M. (1993) · Journal of the American Chemical Society · doi:10.1021/ja00067a063 · Cited by 6,020
Gwyddion: an open-source software for SPM data analysis
Nečas, D., & Klapetek, P. (2012) · Open Physics · doi:10.2478/s11534-011-0096-2 · Cited by 4,454
Bach, U., Lupo, D., Comte, P., Moser, J. E., Weissörtel, F., Salbeck, J., Spreitzer, H., & Grätzel, M. (1998) · Nature · doi:10.1038/26936 · Cited by 3,528
6.5% efficient perovskite quantum-dot-sensitized solar cell
Im, J.-H., Lee, C.-R., Lee, J.-W., Park, S.-W., & Park, N.-G. (2011) · Nanoscale · doi:10.1039/c1nr10867k · Cited by 3,173
Gabedit—A graphical user interface for computational chemistry softwares
Allouche, A. (2011) · Journal of Computational Chemistry · doi:10.1002/jcc.21600 · Cited by 2,460
Noel, N. K., Abate, A., Stranks, S. D., Parrott, E. S., Burlakov, V. M., Goriely, A., & Snaith, H. J. (2014) · ACS Nano · doi:10.1021/nn5036476 · Cited by 1,709
Yip, H.-L., & Jen, A. K.-Y. (2012) · Energy & Environmental Science · doi:10.1039/c2ee02806a · Cited by 1,117
Burschka, J., Dualeh, A., Kessler, F., Baranoff, E., Cevey-Ha, N.-L., Yi, C., Nazeeruddin, M. K., & Grätzel, M. (2011) · Journal of the American Chemical Society · doi:10.1021/ja207367t · Cited by 761
Abate, A., Leijtens, T., Pathak, S., Teuscher, J., Avolio, R., Errico, M. E., Kirkpatrik, J., Ball, J. M., Docampo, P., McPherson, I., et al. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp44397j · Cited by 674
Haque, S. A., Tachibana, Y., Willis, R. L., Moser, J. E., Grätzel, M., Klug, D. R., & Durrant, J. R. (2000) · The Journal of Physical Chemistry B · doi:10.1021/jp991085x · Cited by 634
High efficiency solid-state photovoltaic device due to inhibition of interface charge recombination
Krüger, J., Plass, R., Cevey, L., Piccirelli, M., Grätzel, M., & Bach, U. (2001) · Applied Physics Letters · doi:10.1063/1.1406148 · Cited by 522
Air-Exposure Induced Dopant Redistribution and Energy Level Shifts in Spin-Coated Spiro-MeOTAD Films
Hawash, Z., Ono, L. K., Raga, S. R., Lee, M. V., & Qi, Y. (2015) · Chemistry of Materials · doi:10.1021/cm504022q · Cited by 430
Self-citationA simple spiro-type hole transporting material for efficient perovskite solar cells
Ganesan, P., Fu, K., Gao, P., Raabe, I., Schenk, K., Scopelliti, R., Luo, J., Wong, L. H., Grätzel, M., & Nazeeruddin, M. K. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03773a · Cited by 233
Spiro-OMeTAD single crystals: Remarkably enhanced charge-carrier transport via mesoscale ordering
Shi, D., Qin, X., Li, Y., He, Y., Zhong, C., Pan, J., Dong, H., Xu, W., Li, T., Hu, W., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501491 · Cited by 167
Cited by
Lessons learned from spiro-OMeTAD and PTAA in perovskite solar cells
Rombach, F. M., Haque, S. A., & Macdonald, T. J. (2021) · Energy & Environmental Science · doi:10.1039/d1ee02095a · Cited by 730
Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions
Ono, L. K., Juarez-Perez, E. J., & Qi, Y. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b06001 · Cited by 593
Self-citationHawash, Z., Ono, L. K., & Qi, Y. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201700623 · Cited by 455
Self-citationHole transporting materials for perovskite solar cells: a chemical approach
Urieta-Mora, J., García-Benito, I., Molina-Ontoria, A., & Martín, N. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00262b · Cited by 433
Schloemer, T. H., Christians, J. A., Luther, J. M., & Sellinger, A. (2019) · Chemical Science · doi:10.1039/c8sc05284k · Cited by 384
Metadata
- Authors
- Juarez-Perez, E. J., Leyden, M. R., Wang, S., Ono, L. K., Hawash, Z., & Qi, Y.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-08-04
- Volume
- 28
- Issue
- 16
- Pages
- 5702-5709
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2491525735
- Cited by
- 270
- References
- 24
- FWCI
- 10.98
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.