The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
From Nano- to Micrometer Scale: The Role of Antisolvent Treatment on High Performance Perovskite Solar Cells
Open accessAbstract
Abstract To date, antisolvent treatment has become one of the most important means to fabricate high efficiency perovskite solar cells (PSCs); however, the few reported antisolvents have not been analyzed on a uniform platform, and there is hitherto no clear reasoning in the choice of antisolvents toward high performance PSCs. Here, we study the role of the antisolvents in the nucleation kinetics of perovskite solutions and their residual influence on perovskite crystal growth, film formation, and device performance. Through X-ray diffraction analysis on the complicated double mixed perovskite, we qualitatively evaluate the impact of thermal annealing and antisolvent treatment (A.S.T.) on the phase composition and microstructure of the films. By using miscible antisolvents with high boiling point instead of immiscible low boiling point solvents, we obtain homogeneous and almost pinhole-free perovskite films. When using trifluorotoluene (TFT) to replace toluene and chlorobenzene as a novel antisolvent, we achieve a power conversion efficiency (PCE) of 20.3% under optimized device fabrication conditions with a composite perovskite as active layer. The conclusions from this study should assist in establishing reproducible fabrication processes and finding better antisolvent candidates for perovskite solar cells.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Powering the planet: Chemical challenges in solar energy utilization
Lewis, N. S., & Nocera, D. G. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0603395103 · Cited by 8,310
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Stoumpos, C. C., Malliakas, C. D., & Kanatzidis, M. G. (2013) · Inorganic Chemistry · doi:10.1021/ic401215x · Cited by 5,416
Baikie, T., Fang, Y., Kadro, J. M., Schreyer, M., Wei, F., Mhaisalkar, S. G., Graetzel, M., & White, T. J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10518k · Cited by 2,534
Efficient luminescent solar cells based on tailored mixed-cation perovskites
Bi, D., Tress, W., Dar, M. I., Gao, P., Luo, J., Renevier, C., Schenk, K., Abate, A., Giordano, F., Correa Baena, J.-P., et al. (2016) · Science Advances · doi:10.1126/sciadv.1501170 · Cited by 1,864
Self-citationXiao, Z., Dong, Q., Bi, C., Shao, Y., Yuan, Y., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201401685 · Cited by 1,703
Xiao, M., Huang, F., Huang, W., Dkhissi, Y., Zhu, Y., Etheridge, J., Gray‐Weale, A., Bach, U., Cheng, Y., & Spiccia, L. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405334 · Cited by 1,630
Organohalide lead perovskites for photovoltaic applications
Gao, P., Grätzel, M., & Nazeeruddin, M. K. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee00942h · Cited by 1,410
Self-citationSelf-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells
Son, D.-Y., Lee, J.-W., Choi, Y. J., Jang, I.-H., Lee, S., Yoo, P. J., Shin, H., Ahn, N., Choi, M., Kim, D., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.81 · Cited by 1,053
Han, Q., Bae, S., Sun, P., Hsieh, Y., Yang, Y. (., Rim, Y. S., Zhao, H., Chen, Q., Shi, W., Li, G., et al. (2016) · Advanced Materials · doi:10.1002/adma.201505002 · Cited by 1,010
Cubic Perovskite Structure of Black Formamidinium Lead Iodide, α-[HC(NH2)2]PbI3, at 298 K
Weller, M. T., Weber, O. J., Frost, J. M., & Walsh, A. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b01432 · Cited by 580
Zhao, Y., & Zhu, K. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp502696w · Cited by 555
Huang, F., Dkhissi, Y., Huang, W., Xiao, M., Benesperi, I., Rubanov, S., Zhu, Y., Lin, X., Jiang, L., Zhou, Y., et al. (2014) · Nano Energy · doi:10.1016/j.nanoen.2014.08.015 · Cited by 547
Beneficial Effects of PbI2 Incorporated in Organo‐Lead Halide Perovskite Solar Cells
Kim, Y. C., Jeon, N. J., Noh, J. H., Yang, W. S., Seo, J., Yun, J. S., Ho‐Baillie, A., Huang, S., Green, M. A., Seidel, J., et al. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502104 · Cited by 462
An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive
Zuo, C., & Ding, L. (2014) · Nanoscale · doi:10.1039/c4nr02425g · Cited by 385
Xie, F. X., Zhang, D., Su, H., Ren, X., Wong, K. S., Grätzel, M., & Choy, W. C. H. (2015) · ACS Nano · doi:10.1021/nn505978r · Cited by 351
Solvent engineering towards controlled grain growth in perovskite planar heterojunction solar cells
Rong, Y., Tang, Z., Zhao, Y., Zhong, X., Venkatesan, S., Graham, H., Patton, M., Jing, Y., Guloy, A. M., & Yao, Y. (2015) · Nanoscale · doi:10.1039/c5nr02866c · Cited by 343
Cao, J., Jing, X., Yan, J., Hu, C., Chen, R., Yin, J., Li, J., & Zheng, N. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04924 · Cited by 320
Bi, D., Gao, P., Scopelliti, R., Oveisi, E., Luo, J., Grätzel, M., Hagfeldt, A., & Nazeeruddin, M. K. (2016) · Advanced Materials · doi:10.1002/adma.201505255 · Cited by 285
Self-citationBi, D., Xu, B., Gao, P., Sun, L., Grätzel, M., & Hagfeldt, A. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.03.020 · Cited by 279
Self-citationXie, L.-Q., Chen, L., Nan, Z.-A., Lin, H.-X., Wang, T., Zhan, D.-P., Yan, J.-W., Mao, B.-W., & Tian, Z.-Q. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.6b12432 · Cited by 232
Wang, L., Wang, K., & Zou, B. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00999 · Cited by 227
Weber, O. J., Charles, B., & Weller, M. T. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06607k · Cited by 181
Zheng, X., Chen, B., Wu, C., & Priya, S. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.08.023 · Cited by 174
Xiao, Z., Yuan, Y., Yang, B., VanDerslice, J., Chen, J., Dyck, O., Duscher, G. J., & Huang, J. (2014) · Advanced Materials · doi:10.1002/adma.201305196 · Cited by 150
Unraveling the Reasons for Efficiency Loss in Perovskite Solar Cells
Lee, Y. H., Luo, J., Humphry‐Baker, R., Gao, P., Grätzel, M., & Nazeeruddin, M. K. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201501024 · Cited by 145
Self-citationAdvanced Concepts in Photovoltaics
Nozik, A. J., Conibeer, G., Beard, M. C., Ballif, C., Boccard, M., Söderström, K., Bugnon, G., Meillaud, F., & Wyrsch, N. (2014) · Royal Society of Chemistry eBooks · doi:10.1039/9781849739955 · Cited by 68
Cited by
High-Efficiency Perovskite Solar Cells
Kim, J. Y., Lee, J.-W., Jung, H. S., Shin, H., & Park, N.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00107 · Cited by 2,800
Scalable fabrication and coating methods for perovskite solar cells and solar modules
Park, N.-G., & Zhu, K. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0176-2 · Cited by 908
Perovskite precursor solution chemistry: from fundamentals to photovoltaic applications
Jung, M., Ji, S.-G., Kim, G., & Seok, S. I. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00656c · Cited by 816
Understanding of perovskite crystal growth and film formation in scalable deposition processes
Liu, C., Cheng, Y.-B., & Ge, Z. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00711c · Cited by 675
Synthetic Approaches for Halide Perovskite Thin Films
Dunlap-Shohl, W. A., Zhou, Y., Padture, N. P., & Mitzi, D. B. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00318 · Cited by 631
Metadata
- Authors
- Paek, S., Schouwink, P., Athanasopoulou, E. N., Cho, K. T., Grancini, G., Lee, Y., Zhang, Y., Stellacci, F., Nazeeruddin, M. K., & Gao, P.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-04-03
- Volume
- 29
- Issue
- 8
- Pages
- 3490-3498
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2602866473
- Cited by
- 299
- References
- 29
- FWCI
- 15.89
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.