The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Searching for “Defect-Tolerant” Photovoltaic Materials: Combined Theoretical and Experimental Screening
Open accessAbstract
Recently, we and others have proposed screening criteria for “defect-tolerant” photovoltaic (PV) absorbers, identifying several classes of semiconducting compounds with electronic structures similar to those of hybrid lead–halide perovskites. In this work, we reflect on the accuracy and prospects of these new design criteria through a combined experimental and theoretical approach. We construct a model to extract photoluminescence lifetimes of six of these candidate PV absorbers, including four (InI, SbSI, SbSeI, and BiOI) for which time-resolved photoluminescence has not been previously reported. The lifetimes of all six candidate materials exceed 1 ns, a threshold for promising early stage PV device performance. However, there are variations between these materials, and none achieve lifetimes as high as those of the hybrid lead–halide perovskites, suggesting that the heuristics for defect-tolerant semiconductors are incomplete. We explore this through first-principles point defect calculations and Shockley–Read–Hall recombination models to describe the variation between the measured materials. In light of these insights, we discuss the evolution of screening criteria for defect tolerance and high-performance PV materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
The emergence of perovskite solar cells
Green, M. A., Ho-Baillie, A., & Snaith, H. J. (2014) · Nature Photonics · doi:10.1038/nphoton.2014.134 · Cited by 7,432
High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites
Wehrenfennig, C., Eperon, G. E., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2014) · Advanced Materials · doi:10.1002/adma.201305172 · Cited by 3,239
Unusual defect physics in CH3NH3PbI3 perovskite solar cell absorber
Yin, W.-J., Shi, T., & Yan, Y. (2014) · Applied Physics Letters · doi:10.1063/1.4864778 · Cited by 2,707
Ab-initio structure determination of LiSbWO6 by X-ray powder diffraction
Le Bail, A., Duroy, H., & Fourquet, J. L. (1988) · Materials Research Bulletin · doi:10.1016/0025-5408(88)90019-0 · Cited by 2,694
Slavney, A. H., Hu, T., Lindenberg, A. M., & Karunadasa, H. I. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.5b13294 · Cited by 2,204
Unit-cell refinement from powder diffraction scans
Pawley, G. S. (1981) · Journal of Applied Crystallography · doi:10.1107/s0021889881009618 · Cited by 1,965
Defect physics of theCuInSe2chalcopyrite semiconductor
Zhang, S. B., Wei, S.-H., Zunger, A., & Katayama-Yoshida, H. (1998) · Physical Review B · doi:10.1103/physrevb.57.9642 · Cited by 1,407
Materials Availability Expands the Opportunity for Large-Scale Photovoltaics Deployment
Wadia, C., Alivisatos, A. P., & Kammen, D. M. (2009) · Environmental Science & Technology · doi:10.1021/es8019534 · Cited by 1,156
High dislocation densities in high efficiency GaN-based light-emitting diodes
Lester, S. D., Ponce, F. A., Craford, M. G., & Steigerwald, D. A. (1995) · Applied Physics Letters · doi:10.1063/1.113252 · Cited by 966
The Role of Intrinsic Defects in Methylammonium Lead Iodide Perovskite
Kim, J., Lee, S.-H., Lee, J. H., & Hong, K.-H. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500370k · Cited by 906
(2020) · INDIGO (University of Illinois at Chicago) · doi:10.1021/jacs.5b13294.s002 · Cited by 892
Brandt, R. E., Stevanović, V., Ginley, D. S., & Buonassisi, T. (2015) · MRS Communications · doi:10.1557/mrc.2015.26 · Cited by 817
Self-citationXiao, Z., Meng, W., Wang, J., Mitzi, D. B., & Yan, Y. (2017) · Materials Horizons · doi:10.1039/c6mh00519e · Cited by 735
Defect Tolerance in Methylammonium Lead Triiodide Perovskite
Steirer, K. X., Schulz, P., Teeter, G., Stevanovic, V., Yang, M., Zhu, K., & Berry, J. J. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00196 · Cited by 671
Maughan, A. E., Ganose, A. M., Bordelon, M. M., Miller, E. M., Scanlon, D. O., & Neilson, J. R. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b03207 · Cited by 626
Solar cell efficiency tables (version 46)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2015) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2637 · Cited by 528
Hybrid Organic–Inorganic Perovskites (HOIPs): Opportunities and Challenges
Berry, J., Buonassisi, T., Egger, D. A., Hodes, G., Kronik, L., Loo, Y., Lubomirsky, I., Marder, S. R., Mastai, Y., Miller, J. S., et al. (2015) · Advanced Materials · doi:10.1002/adma.201502294 · Cited by 460
Self-citationFerroelectric materials for solar energy conversion: photoferroics revisited
Butler, K. T., Frost, J. M., & Walsh, A. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03523b · Cited by 445
CdTe solar cells with open-circuit voltage breaking the 1 V barrier
Burst, J. M., Duenow, J. N., Albin, D. S., Colegrove, E., Reese, M. O., Aguiar, J. A., Jiang, C.-S., Patel, M. K., Al-Jassim, M. M., Kuciauskas, D., et al. (2016) · Nature Energy · doi:10.1038/nenergy.2016.15 · Cited by 435
Beyond methylammonium lead iodide: prospects for the emergent field of ns2containing solar absorbers
Ganose, A. M., Savory, C. N., & Scanlon, D. O. (2017) · Chemical Communications · doi:10.1039/c6cc06475b · Cited by 433
Accurate prediction of defect properties in density functional supercell calculations
Lany, S., & Zunger, A. (2009) · Modelling and Simulation in Materials Science and Engineering · doi:10.1088/0965-0393/17/8/084002 · Cited by 401
Defect Tolerant Semiconductors for Solar Energy Conversion
Zakutayev, A., Caskey, C. M., Fioretti, A. N., Ginley, D. S., Vidal, J., Stevanovic, V., Tea, E., & Lany, S. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz5001787 · Cited by 388
Methylammonium Bismuth Iodide as a Lead‐Free, Stable Hybrid Organic–Inorganic Solar Absorber
Hoye, R. L. Z., Brandt, R. E., Osherov, A., Stevanović, V., Stranks, S. D., Wilson, M. W. B., Kim, H., Akey, A. J., Perkins, J. D., Kurchin, R. C., et al. (2016) · Chemistry – A European Journal · doi:10.1002/chem.201505055 · Cited by 368
Self-citationAzarhoosh, P., McKechnie, S., Frost, J. M., Walsh, A., & van Schilfgaarde, M. (2016) · APL Materials · doi:10.1063/1.4955028 · Cited by 212
A computational framework for automation of point defect calculations
Goyal, A., Gorai, P., Peng, H., Lany, S., & Stevanović, V. (2017) · Computational Materials Science · doi:10.1016/j.commatsci.2016.12.040 · Cited by 210
Self-citationPowell, D. M., Fu, R., Horowitz, K., Basore, P. A., Woodhouse, M., & Buonassisi, T. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01509j · Cited by 166
Self-citationShallow halogen vacancies in halide optoelectronic materials
Shi, H., & Du, M. (2014) · Physical Review B · doi:10.1103/physrevb.90.174103 · Cited by 145
Single-crystal II-VI on Si single-junction and tandem solar cells
Carmody, M., Mallick, S., Margetis, J., Kodama, R. H., Biegala, T., Xu, D., Bechmann, P., Garland, J. W., & Sivananthan, S. (2010) · Applied Physics Letters · doi:10.1063/1.3386529 · Cited by 103
Sustainability metrics for extending thin-film photovoltaics to terawatt levels
Fthenakis, V. M. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.50 · Cited by 80
Jaramillo, R., Sher, M., Ofori-Okai, B. K., Steinmann, V., Yang, C., Hartman, K., Nelson, K. A., Lindenberg, A. M., Gordon, R. G., & Buonassisi, T. (2016) · Journal of Applied Physics · doi:10.1063/1.4940157 · Cited by 62
Self-citationFabini, D. H., Labram, J. G., Lehner, A. J., Bechtel, J. S., Evans, H. A., der Ven, A. V., Wudl, F., Chabinyc, M. L., & Seshadri, R. (2016) · Inorganic Chemistry · doi:10.1021/acs.inorgchem.6b01539 · Cited by 56
Sfaelou, S., Raptis, D., Dracopoulos, V., & Lianos, P. (2015) · RSC Advances · doi:10.1039/c5ra19835f · Cited by 52
Cited by
Properties and potential optoelectronic applications of lead halide perovskite nanocrystals
Kovalenko, M. V., Protesescu, L., & Bodnarchuk, M. I. (2017) · Science · doi:10.1126/science.aam7093 · Cited by 2,652
State of the Art and Prospects for Halide Perovskite Nanocrystals
Dey, A., Ye, J., De, A., Debroye, E., Ha, S. K., Bladt, E., Kshirsagar, A. S., Wang, Z., Yin, J., Wang, Y., et al. (2021) · ACS Nano · doi:10.1021/acsnano.0c08903 · Cited by 1,478
Self-citationRare-Earth Doping in Nanostructured Inorganic Materials
Zheng, B., Fan, J., Chen, B., Qin, X., Wang, J., Wang, F., Deng, R., & Liu, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00644 · Cited by 1,204
Fu, Y., Zhu, H., Chen, J., Hautzinger, M. P., Zhu, X.-Y., & Jin, S. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0080-9 · Cited by 934
Present status and future prospects of perovskite photovoltaics
Snaith, H. J. (2018) · Nature Materials · doi:10.1038/s41563-018-0071-z · Cited by 803
Metadata
- Authors
- Brandt, R. E., Poindexter, J. R., Gorai, P., Kurchin, R. C., Hoye, R. L. Z., Nienhaus, L., Wilson, M. W. B., Polizzotti, J. A., Sereika, R., Žaltauskas, R., Lee, L. C., MacManus-Driscoll, J. L., Bawendi, M., Stevanović, V., & Buonassisi, T.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-05-17
- Volume
- 29
- Issue
- 11
- Pages
- 4667-4674
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2612298501
- Cited by
- 397
- References
- 33
- FWCI
- 13.65
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.