The DOI matches its Crossref record; 247 of the 247 references it cites were found in a registry or an index.
Synchrotron X-ray Analytical Techniques for Studying Materials Electrochemistry in Rechargeable Batteries
Abstract
Rechargeable battery technologies have ignited major breakthroughs in contemporary society, including but not limited to revolutions in transportation, electronics, and grid energy storage. The remarkable development of rechargeable batteries is largely attributed to in-depth efforts to improve battery electrode and electrolyte materials. There are, however, still intimidating challenges of lower cost, longer cycle and calendar life, higher energy density, and better safety for large scale energy storage and vehicular applications. Further progress with rechargeable batteries may require new chemistries (lithium ion batteries and beyond) and better understanding of materials electrochemistry in the various battery technologies. In the past decade, advancement of battery materials has been complemented by new analytical techniques that are capable of probing battery chemistries at various length and time scales. Synchrotron X-ray techniques stand out as one of the most effective methods that allow for nearly nondestructive probing of materials characteristics such as electronic and geometric structures with various depth sensitivities through spectroscopy, scattering, and imaging capabilities. This article begins with the discussion of various rechargeable batteries and associated important scientific questions in the field, followed by a review of synchrotron X-ray based analytical tools (scattering, spectroscopy, and imaging) and their successful applications (ex situ, in situ, and in operando) in gaining fundamental insights into these scientific questions. Furthermore, electron microscopy and spectroscopy complement the detection length scales of synchrotron X-ray tools and are also discussed toward the end. We highlight the importance of studying battery materials by combining analytical techniques with complementary length sensitivities, such as the combination of X-ray absorption spectroscopy and electron spectroscopy with spatial resolution, because a sole technique may lead to biased and inaccurate conclusions. We then discuss the current progress of experimental design for synchrotron experiments and methods to mitigate beam effects. Finally, a perspective is provided to elaborate how synchrotron techniques can impact the development of next-generation battery chemistries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kinetics of Phase Change. I General Theory
Avrami, M. (1939) · The Journal of Chemical Physics · doi:10.1063/1.1750380 · Cited by 11,399
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
Phase retrieval algorithms: a comparison
Fienup, J. R. (1982) · Applied Optics · doi:10.1364/ao.21.002758 · Cited by 5,596
Slater, M. D., Kim, D., Lee, E., & Johnson, C. S. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201200691 · Cited by 4,518
Maximum Likelihood Reconstruction for Emission Tomography
Shepp, L. A., & Vardi, Y. (1982) · IEEE Transactions on Medical Imaging · doi:10.1109/tmi.1982.4307558 · Cited by 4,429
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Theoretical approaches to x-ray absorption fine structure
Rehr, J. J., & Albers, R. C. (2000) · Reviews of Modern Physics · doi:10.1103/revmodphys.72.621 · Cited by 3,301
Fast Lithium Ion Conduction in Garnet‐Type Li7La3Zr2O12
Murugan, R., Thangadurai, V., & Weppner, W. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701144 · Cited by 3,250
Band gaps and electronic structure of transition-metal compounds
Zaanen, J., Sawatzky, G. A., & Allen, J. W. (1985) · Physical Review Letters · doi:10.1103/physrevlett.55.418 · Cited by 3,064
Cited by
Winter, M., Barnett, B., & Xu, K. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00422 · Cited by 2,193
Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries
Assat, G., & Tarascon, J.-M. (2018) · Nature Energy · doi:10.1038/s41560-018-0097-0 · Cited by 1,588
Gao, L., Cui, X., Sewell, C. D., Li, J., & Lin, Z. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00962h · Cited by 1,038
Electrocatalysis in Alkaline Media and Alkaline Membrane-Based Energy Technologies
Yang, Y., Peltier, C. R., Zeng, R., Schimmenti, R., Li, Q., Huang, X., Yan, Z., Potsi, G., Selhorst, R., Lu, X., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00331 · Cited by 544
Self-citationOxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
Superiority of Dual‐Atom Catalysts in Electrocatalysis: One Step Further Than Single‐Atom Catalysts
Li, R., & Wang, D. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103564 · Cited by 510
Lewis, J. A., Cortes, F. J. Q., Liu, Y., Miers, J. C., Verma, A., Vishnugopi, B. S., Tippens, J., Prakash, D., Marchese, T. S., Han, S. Y., et al. (2021) · Nature Materials · doi:10.1038/s41563-020-00903-2 · Cited by 444
Self-citationZuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
Self-citationIn situ/operando synchrotron-based X-ray techniques for lithium-ion battery research
Bak, S.-M., Shadike, Z., Lin, R., Yu, X., & Yang, X.-Q. (2018) · NPG Asia Materials · doi:10.1038/s41427-018-0056-z · Cited by 403
Self-citationQuilty, C. D., Wu, D., Li, W., Bock, D. C., Wang, L., Housel, L. M., Abraham, A., Takeuchi, K. J., Marschilok, A. C., & Takeuchi, E. S. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00214 · Cited by 388
Recent progress on solid-state hybrid electrolytes for solid-state lithium batteries
Liang, J., Luo, J., Sun, Q., Yang, X., Li, R., & Sun, X. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.06.021 · Cited by 365
Self-citationHeterogeneous damage in Li-ion batteries: Experimental analysis and theoretical modeling
Xu, R., Yang, Y., Yin, F., Liu, P., Cloetens, P., Liu, Y., Lin, F., & Zhao, K. (2019) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2019.05.003 · Cited by 345
Self-citationOxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation
Zhang, H., Liu, H., Piper, L. F. J., Whittingham, M. S., & Zhou, G. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00327 · Cited by 338
Advanced Liquid Electrolytes for Rechargeable Li Metal Batteries
Jie, Y., Ren, X., Cao, R., Cai, W., & Jiao, S. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201910777 · Cited by 330
Yan, P., Zheng, J., Chen, T., Luo, L., Jiang, Y., Wang, K., Sui, M., Zhang, J.-G., Zhang, S., & Wang, C. (2018) · Nature Communications · doi:10.1038/s41467-018-04862-w · Cited by 310
Zhao, Y., Zheng, K., & Sun, X. (2018) · Joule · doi:10.1016/j.joule.2018.11.012 · Cited by 288
Antiperovskite Electrolytes for Solid-State Batteries
Xia, W., Zhao, Y., Zhao, F., Adair, K., Zhao, R., Li, S., Zou, R., Zhao, Y., & Sun, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00594 · Cited by 288
Nie, K., Hong, Y., Qiu, J., Li, Q., Yu, X., Li, H., & Chen, L. (2018) · Frontiers in Chemistry · doi:10.3389/fchem.2018.00616 · Cited by 278
Self-citationAnode‐Free Solid‐State Lithium Batteries: A Review
Huang, W., Zhao, C., Wu, P., Yuan, H., Feng, W., Liu, Z., Lu, Y., Sun, S., Fu, Z., Hu, J., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202201044 · Cited by 278
Supported dual-atom catalysts: Preparation, characterization, and potential applications
Zhang, J., Huang, Q.-A., Wang, J., Wang, J., Zhang, J., & Zhao, Y. (2020) · Chinese Journal of Catalysis · doi:10.1016/s1872-2067(20)63536-7 · Cited by 271
Yang, W., & Devereaux, T. P. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.04.018 · Cited by 266
Self-citationLi, X., Ren, Z., Norouzi Banis, M., Deng, S., Zhao, Y., Sun, Q., Wang, C., Yang, X., Li, W., Liang, J., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.9b01676 · Cited by 263
Self-citationStalling oxygen evolution in high-voltage cathodes by lanthurization
Cai, M., Dong, Y., Xie, M., Dong, W., Dong, C., Dai, P., Zhang, H., Wang, X., Sun, X., Zhang, S., et al. (2023) · Nature Energy · doi:10.1038/s41560-022-01179-3 · Cited by 263
Chemomechanical interplay of layered cathode materials undergoing fast charging in lithium batteries
Xia, S., Mu, L., Xu, Z., Wang, J., Wei, C., Liu, L., Pianetta, P., Zhao, K., Yu, X., Lin, F., et al. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.051 · Cited by 262
Self-citationJiang, Z., Li, J., Yang, Y., Mu, L., Wei, C., Yu, X., Pianetta, P., Zhao, K., Cloetens, P., Lin, F., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-16233-5 · Cited by 261
Self-citationNanoscale Phenomena in Lithium-Ion Batteries
Jung, S.-K., Hwang, I., Chang, D., Park, K.-Y., Kim, S. J., Seong, W. M., Eum, D., Park, J., Kim, B., Kim, J., et al. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00405 · Cited by 253
Guan, D., Zhou, J., Huang, Y.-C., Dong, C.-L., Wang, J.-Q., Zhou, W., & Shao, Z. (2019) · Nature Communications · doi:10.1038/s41467-019-11847-w · Cited by 206
Ebner, K., Clark, A. H., Saveleva, V. A., Smolentsev, G., Chen, J., Ni, L., Li, J., Zitolo, A., Jaouen, F., Kramm, U. I., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202103699 · Cited by 61
Metadata
- Authors
- Lin, F., Liu, Y., Yu, X., Cheng, L., Singer, A., Shpyrko, O. G., Xin, H. L., Tamura, N., Tian, C., Weng, T.-C., Yang, X.-Q., Meng, Y. S., Nordlund, D., Yang, W., & Doeff, M. M.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-09-29
- Volume
- 117
- Issue
- 21
- Pages
- 13123-13186
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W2757891104
- Cited by
- 582
- References
- 247
- FWCI
- 2.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.