The DOI matches its Crossref record; 246 of the 246 references it cites were found in a registry or an index.
Exploring Chemical, Mechanical, and Electrical Functionalities of Binders for Advanced Energy-Storage Devices
Abstract
Tremendous efforts have been devoted to the development of electrode materials, electrolytes, and separators of energy-storage devices to address the fundamental needs of emerging technologies such as electric vehicles, artificial intelligence, and virtual reality. However, binders, as an important component of energy-storage devices, are yet to receive similar attention. Polyvinylidene fluoride (PVDF) has been the dominant binder in the battery industry for decades despite several well-recognized drawbacks, i.e., limited binding strength due to the lack of chemical bonds with electroactive materials, insufficient mechanical properties, and low electronic and lithium-ion conductivities. The limited binding function cannot meet inherent demands of emerging electrode materials with high capacities such as silicon anodes and sulfur cathodes. To address these concerns, in this review we divide the binding between active materials and binders into two major mechanisms: mechanical interlocking and interfacial binding forces. We review existing and emerging binders, binding technology used in energy-storage devices (including lithium-ion batteries, lithium-sulfur batteries, sodium-ion batteries, and supercapacitors), and state-of-the-art mechanical characterization and computational methods for binder research. Finally, we propose prospective next-generation binders for energy-storage devices from the molecular level to the macro level. Functional binders will play crucial roles in future high-performance energy-storage devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–246 of 246
Dong, Y., Liu, S., Wang, Z., Liu, Y., Zhao, Z., & Qiu, J. (2015) · Nanoscale · doi:10.1039/c5nr01015b · Cited by 107
Chitosan as a functional additive for high-performance lithium–sulfur batteries
Chen, Y., Liu, N., Shao, H., et al. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03032c · Cited by 106
Younesi, R., Hahlin, M., Treskow, M., Scheers, J., Johansson, P., & Edström, K. (2012) · The Journal of Physical Chemistry C · doi:10.1021/jp303691m · Cited by 106
Kuruba, R., Datta, M. K., Damodaran, K., Jampani, P., Gattu, B., Patel, P. P., Shanthi, P. M., Damle, S. S., & Kumta, P. N. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.07.102 · Cited by 101
Yoo, M., Frank, C. W., Mori, S., & Yamaguchi, S. (2004) · Chemistry of Materials · doi:10.1021/cm0304593 · Cited by 100
Surface properties and adhesion of wood fiber reinforced thermoplastic composites
Gupta, B. S., Reiniati, I., & Laborie, M. G. (2007) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2007.03.002 · Cited by 100
Biosurfaces: A Materials Science and Engineering Perspective
Balani, K., Verma, V., Agarwal, A. K., & Narayan, R. J. (2015) · Thammasat University Digital Collections · Cited by 100
The intrinsic toughness and adhesion mechanisms of a glass/epoxy interface
Swadener, J. G., Liechti, K. M., & de Lozanne, A. L. (1999) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(98)00084-2 · Cited by 94
Moretti, A., Kim, G., Bresser, D., Renger, K., Paillard, E. E., Marassi, R., Winter, M., & Passerini, S. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.07.142 · Cited by 92
Xue, Q., Li, J., Xu, G., Zhou, H., Wang, X., & Kang, F. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta04024d · Cited by 88
Wood‐induced catalytic activation of PF adhesives autopolymerization vs. PF/wood covalent bonding
Pizzi, A., Mtsweni, B., & Parsons, W. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070521302 · Cited by 87
Electrode compositions for carbon power supercapacitors
Bonnefoi, L., Simon, P., Fauvarque, J. F., et al. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00069-5 · Cited by 85
Byles, B. W., Palapati, N. K. R., Subramanian, A., & Pomerantseva, E. A. (2016) · APL Materials · doi:10.1063/1.4948272 · Cited by 83
Gurunathan, P., Ette, P. M., & Ramesha, K. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502852x · Cited by 81
Guar gum as a novel binder for sulfur composite cathodes in rechargeable lithium batteries
Li, Q., Yang, H., Xie, L., Yang, J., NuLi, Y., & Wang, J. (2016) · Chemical Communications · doi:10.1039/c6cc07250j · Cited by 80
Preparation and electrochemical characterization of the porous sulfur cathode using a gelatin binder
Sun, J., Huang, Y., Wang, W., et al. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.04.016 · Cited by 77
Peled, E., Goor, M., Schektman, I., Mukra, T., Shoval, Y., & Golodnitsky, D. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0161701jes · Cited by 77
Lu, H., Behm, M., Leijonmarck, S., Lindbergh, G., & Cornell, A. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b05016 · Cited by 75
Improve Rate Capability of the Sulfur Cathode Using a Gelatin Binder
Wang, Q., Wang, W., Huang, Y., et al. (2011) · Journal of The Electrochemical Society · doi:10.1149/1.3583375 · Cited by 69
Huang, S., Ren, J., Liu, R., Yue, M., Huang, Y., & Yuan, G. (2017) · International Journal of Energy Research · doi:10.1002/er.3826 · Cited by 69
Frischmann, P. D., Hwa, Y., Cairns, E. J., et al. (2016) · Chemistry of Materials · doi:10.1021/acs.chemmater.6b03013 · Cited by 68
Ling, M., Zhao, H., Xiaoc, X., Shi, F., Wu, M., Qiu, J., Li, S., Song, X., Liu, G., & Zhang, S. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta05817h · Cited by 60
Self-citationMechanism of Adhesion between Polymer Fibers at Nanoscale Contacts
Shi, Q., Wong, S., Ye, W., Jianwen, H., Zhao, J., & Yin, J. (2012) · Langmuir · doi:10.1021/la204633c · Cited by 59
Reuse and Recycling of Lithium‐Ion Power Batteries
Zhao, G. (2017) · Wiley eBooks · doi:10.1002/9781119321866 · Cited by 59
Yang, J., Zhang, L., Zhang, T., et al. (2017) · Electrochemistry Communications · doi:10.1016/j.elecom.2017.12.023 · Cited by 59
Large area multi-stacked lithium-ion batteries for flexible and rollable applications
Kim, J., Lee, Y.-H., Lee, I., Kim, T., Ryou, M., & Choi, J. W. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta00551a · Cited by 58
Li, G., Wang, C., Cai, W., Lin, Z., Li, Z. P., & Zhang, S. (2016) · NPG Asia Materials · doi:10.1038/am.2016.138 · Cited by 58
Self-citationMicro‐MoS2 with Excellent Reversible Sodium‐Ion Storage
Wang, X., Li, Y., Guan, Z., Wang, Z., & Chen, L. (2015) · Chemistry - A European Journal · doi:10.1002/chem.201406635 · Cited by 55
Galactomannan binding agents for silicon anodes in Li-ion batteries
Dufficy, M. K., Khan, S. A., & Fedkiw, P. S. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta03126e · Cited by 52
Li-rich Thin Film Cathode Prepared by Pulsed Laser Deposition
Yan, B., Liu, J., Song, B., Xiao, P., & Lü, L. (2013) · Scientific Reports · doi:10.1038/srep03332 · Cited by 51
Effect of Molecular Architecture on Single Polymer Adhesion
Kienle, S., Gallei, M., Yu, H., Zhang, B., Krysiak, S., Balzer, B. N., Rehahn, M., Schlüter, A. D., & Hugel, T. (2014) · Langmuir · doi:10.1021/la500783n · Cited by 40
Water soluble binder for fabrication of Li4Ti5O12 electrodes
Pohjalainen, E., Räsänen, S., Jokinen, M., Yliniemi, K., Worsley, D. A., Kuusivaara, J., Juurikivi, J., Ekqvist, R., Kallio, T. M., & Karppinen, M. J. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.083 · Cited by 39
Valvo, M., Liivat, A., Eriksson, H., Tai, C., & Edström, K. (2017) · ChemSusChem · doi:10.1002/cssc.201700070 · Cited by 38
Jiao, Y., Chen, W., Lei, T., Dai, L., Chen, B., Wu, C., & Xiong, J. (2017) · Nanoscale Research Letters · doi:10.1186/s11671-017-1948-5 · Cited by 37
Interaction analysis between binder and particles in multiphase slurries
Cho, K. Y., Kwon, Y. I., Youn, J. R., & Song, Y. S. (2013) · The Analyst · doi:10.1039/c3an36720g · Cited by 33
High-capacity sodium ion battery anodes based on CuO nanosheets and carboxymethyl cellulose binder
Fan, M., Yu, H., & Chen, Y. (2017) · Materials Technology · doi:10.1080/10667857.2017.1295628 · Cited by 33
Using high‐HFP‐content cathode binder for mitigation of heat generation of lithium‐ion battery
Le, A. V., Wang, M., Noelle, D. J., Shi, Y., Meng, Y. S., Wu, D., Fan, J., & Qiao, Y. (2017) · International Journal of Energy Research · doi:10.1002/er.3824 · Cited by 33
Jäckel, N., Dargel, V., Shpigel, N., Sigalov, S., Levi, M. D., Daikhin, L. I., Aurbach, D., & Presser, V. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.10.048 · Cited by 33
Choi, W.-K., Kim, H.-I., Kang, S., et al. (2016) · Carbon letters · doi:10.5714/cl.2016.17.1.079 · Cited by 31
Electroanalytical study of the viability of conversion reactions as energy storage mechanisms
Ponrouch, A., Cabana, J., Dugas, R., Slack, J. L., & Palacín, M. R. (2014) · RSC Advances · doi:10.1039/c4ra05189k · Cited by 30
Flexible Display Technology – Opportunity and Challenges to New Business Application
Chung, I., & Kang, I. (2009) · Molecular Crystals and Liquid Crystals · doi:10.1080/15421400903047950 · Cited by 29
Effects of reactant dispersion on the structure and electrochemical performance of Li1.2V3O8
Liu, Y., Zhou, X., & Guo, Y. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.06.031 · Cited by 29
Synthesis, Characterization, and Thermal Stability of LiCo[sub 1−z][MnMg][sub z/2]O[sub 2]
Luo, W., Li, X., & Dahn, J. R. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3457425 · Cited by 26
Recent Development of Carbonaceous Materials for Lithium–Sulphur Batteries
Gu, X., Hencz, L., & Zhang, S. (2016) · Batteries · doi:10.3390/batteries2040033 · Cited by 24
Self-citationFlexible and wrinkle-free electrode fabricated with polyurethane binder for lithium-ion batteries
Park, G.-G., Park, Y.-K., Park, J.-K., & Lee, J.-W. (2017) · RSC Advances · doi:10.1039/c7ra00800g · Cited by 21
Thiokol with Excellent Restriction on the Shuttle Effect in Lithium–Sulfur Batteries
Liu, B., Wang, S., Yang, Q., Hu, G., & Xiong, C. (2018) · Applied Sciences · doi:10.3390/app8010079 · Cited by 8
Cited by
Sustainable Recycling Technology for Li-Ion Batteries and Beyond: Challenges and Future Prospects
Fan, E., Li, L., Wang, Z., Lin, J., Huang, Y., Yao, Y., Chen, R., & Wu, F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00535 · Cited by 2,020
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Hard Carbon Anodes for Next‐Generation Li‐Ion Batteries: Review and Perspective
Xie, L., Tang, C., Bi, Z., Song, M., Fan, Y., Yan, C., Li, X., Su, F., Zhang, Q., & Chen, C. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101650 · Cited by 617
Metadata
- Authors
- Chen, H., Ling, M., Hencz, L., Ling, H. Y., Li, G., Lin, Z., Liu, G., & Zhang, S.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-08-22
- Volume
- 118
- Issue
- 18
- Pages
- 8936-8982
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W2888404514
- Cited by
- 958
- References
- 246
- FWCI
- 5.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.