The DOI matches its Crossref record; 246 of the 246 references it cites were found in a registry or an index.
Exploring Chemical, Mechanical, and Electrical Functionalities of Binders for Advanced Energy-Storage Devices
Abstract
Tremendous efforts have been devoted to the development of electrode materials, electrolytes, and separators of energy-storage devices to address the fundamental needs of emerging technologies such as electric vehicles, artificial intelligence, and virtual reality. However, binders, as an important component of energy-storage devices, are yet to receive similar attention. Polyvinylidene fluoride (PVDF) has been the dominant binder in the battery industry for decades despite several well-recognized drawbacks, i.e., limited binding strength due to the lack of chemical bonds with electroactive materials, insufficient mechanical properties, and low electronic and lithium-ion conductivities. The limited binding function cannot meet inherent demands of emerging electrode materials with high capacities such as silicon anodes and sulfur cathodes. To address these concerns, in this review we divide the binding between active materials and binders into two major mechanisms: mechanical interlocking and interfacial binding forces. We review existing and emerging binders, binding technology used in energy-storage devices (including lithium-ion batteries, lithium-sulfur batteries, sodium-ion batteries, and supercapacitors), and state-of-the-art mechanical characterization and computational methods for binder research. Finally, we propose prospective next-generation binders for energy-storage devices from the molecular level to the macro level. Functional binders will play crucial roles in future high-performance energy-storage devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Shannon, R. D. (1976) · Acta Crystallographica Section A · doi:10.1107/s0567739476001551 · Cited by 66,145
Issues and challenges facing rechargeable lithium batteries
Tarascon, J.-M., & Armand, M. (2001) · Nature · doi:10.1038/35104644 · Cited by 21,130
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
The Li-Ion Rechargeable Battery: A Perspective
Goodenough, J. B., & Park, K.-S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja3091438 · Cited by 9,962
A review of electrode materials for electrochemical supercapacitors
Wang, G., Zhang, L., & Zhang, J. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15060j · Cited by 9,152
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
Carbon-based materials as supercapacitor electrodes
Zhang, L. L., & Zhao, X. S. (2009) · Chemical Society Reviews · doi:10.1039/b813846j · Cited by 7,459
Reviving the lithium metal anode for high-energy batteries
Lin, D., Liu, Y., & Cui, Y. (2017) · Nature Nanotechnology · doi:10.1038/nnano.2017.16 · Cited by 6,763
Challenges in the development of advanced Li-ion batteries: a review
Etacheri, V., Marom, R., Elazari, R., Salitra, G., & Aurbach, D. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01598b · Cited by 6,726
High-performance lithium battery anodes using silicon nanowires
Chan, C. K., Peng, H., Liu, G., McIlwrath, K., Zhang, X. F., Huggins, R. A., & Cui, Y. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.411 · Cited by 6,683
Self-citationA review on the key issues for lithium-ion battery management in electric vehicles
Lu, L., Han, X., Li, J., Hua, J., & Ouyang, M. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.060 · Cited by 4,837
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Synthesis of electrically conducting organic polymers: halogen derivatives of polyacetylene, (CH) x
Shirakawa, H., Louis, E. J., MacDiarmid, A. G., Chiang, C. K., & Heeger, A. J. (1977) · Journal of the Chemical Society, Chemical Communications · doi:10.1039/c39770000578 · Cited by 3,867
LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density
Mizushima, K., Jones, P. C., Wiseman, P. J., & Goodenough, J. B. (1980) · Materials Research Bulletin · doi:10.1016/0025-5408(80)90012-4 · Cited by 3,856
Silica-Like Malleable Materials from Permanent Organic Networks
Montarnal, D., Capelot, M., Tournilhac, F., & Leibler, L. (2011) · Science · doi:10.1126/science.1212648 · Cited by 3,625
Fu, S.-Y., Feng, X.-Q., Lauke, B., & Mai, Y.-W. (2008) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2008.01.002 · Cited by 3,549
Physical Properties of Polymers Handbook
(2007) · Springer eBooks · doi:10.1007/978-0-387-69002-5 · Cited by 3,429
Nanocomposite polymer electrolytes for lithium batteries
Croce, F., Appetecchi, G. B., Persi, L., & Scrosati, B. (1998) · Nature · doi:10.1038/28818 · Cited by 3,205
Self-healing and thermoreversible rubber from supramolecular assembly
Cordier, P., Tournilhac, F., Soulié-Ziakovic, C., & Leibler, L. (2008) · Nature · doi:10.1038/nature06669 · Cited by 2,984
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Complexes of alkali metal ions with poly(ethylene oxide)
Fenton, D. E., Parker, J. M., & Wright, P. V. (1973) · Polymer · doi:10.1016/0032-3861(73)90146-8 · Cited by 2,697
Tin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage Material
Idota, Y., Kubota, T., Matsufuji, A., Maekawa, Y., & Miyasaka, T. (1997) · Science · doi:10.1126/science.276.5317.1395 · Cited by 2,578
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells
Kasavajjula, U., Wang, C., & Appleby, A. J. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.084 · Cited by 2,491
Challenges and Prospects of Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., & Su, Y.-S. (2013) · Accounts of Chemical Research · doi:10.1021/ar300179v · Cited by 2,380
Synthesis and application of epoxy resins: A review
Jin, F.-L., Li, X., & Park, S.-J. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2015.03.026 · Cited by 2,155
Nanostructured carbon–metal oxide composite electrodes for supercapacitors: a review
Zhi, M., Xiang, C., Li, J., Li, M., & Wu, N. (2013) · Nanoscale · doi:10.1039/c2nr32040a · Cited by 2,140
A review of the electrochemical performance of alloy anodes for lithium-ion batteries
Zhang, W.-J. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.07.020 · Cited by 2,140
Graphene Oxide−MnO2 Nanocomposites for Supercapacitors
Chen, S., Zhu, J., Wu, X., Han, Q., & Wang, X. (2010) · ACS Nano · doi:10.1021/nn901311t · Cited by 2,113
Wei Seh, Z., Li, W., Cha, J. J., Zheng, G., Yang, Y., McDowell, M. T., Hsu, P.-C., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2327 · Cited by 2,107
Physical hydrogels composed of polyampholytes demonstrate high toughness and viscoelasticity
Sun, T. L., Kurokawa, T., Kuroda, S., Ihsan, A. B., Akasaki, T., Sato, K., Haque, M. A., Nakajima, T., & Gong, J. P. (2013) · Nature Materials · doi:10.1038/nmat3713 · Cited by 2,089
The Emerging Chemistry of Sodium Ion Batteries for Electrochemical Energy Storage
Kundu, D., Talaie, E., Duffort, V., & Nazar, L. F. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201410376 · Cited by 2,068
High-performance lithium-ion anodes using a hierarchical bottom-up approach
Magasinski, A., Dixon, P., Hertzberg, B., Kvit, A., Ayala, J., & Yushin, G. (2010) · Nature Materials · doi:10.1038/nmat2725 · Cited by 2,044
Carbon materials for supercapacitor application
Frackowiak, E. (2007) · Physical Chemistry Chemical Physics · doi:10.1039/b618139m · Cited by 2,042
Electrochemical Characteristics and Impedance Spectroscopy Studies of Carbon-Carbon Supercapacitors
Taberna, P. L., Simon, P., & Fauvarque, J. F. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1543948 · Cited by 1,998
High Capacity Anode Materials for Rechargeable Sodium-Ion Batteries
Stevens, D. A., & Dahn, J. R. (2000) · Journal of The Electrochemical Society · doi:10.1149/1.1393348 · Cited by 1,884
A Yolk-Shell Design for Stabilized and Scalable Li-Ion Battery Alloy Anodes
Liu, N., Wu, H., McDowell, M. T., Yao, Y., Wang, C., & Cui, Y. (2012) · Nano Letters · doi:10.1021/nl3014814 · Cited by 1,842
A Major Constituent of Brown Algae for Use in High-Capacity Li-Ion Batteries
Kovalenko, I., Zdyrko, B., Magasinski, A., Hertzberg, B., Milicev, Z., Burtovyy, R., Luzinov, I., & Yushin, G. (2011) · Science · doi:10.1126/science.1209150 · Cited by 1,802
Conductive polymers: Towards a smart biomaterial for tissue engineering
Balint, R., Cassidy, N. J., & Cartmell, S. H. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.02.015 · Cited by 1,777
The development of the Arrhenius equation
Laidler, K. J. (1984) · Journal of Chemical Education · doi:10.1021/ed061p494 · Cited by 1,697
Recent advances in all-solid-state rechargeable lithium batteries
Sun, C., Liu, J., Gong, Y., Wilkinson, D. P., & Zhang, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.01.028 · Cited by 1,688
Silicon Nanotube Battery Anodes
Park, M.-H., Kim, M. G., Joo, J., Kim, K., Kim, J., Ahn, S., Cui, Y., & Cho, J. (2009) · Nano Letters · doi:10.1021/nl902058c · Cited by 1,493
Scientific importance, properties and growing applications of poly(3,4-ethylenedioxythiophene)
Kirchmeyer, S., & Reuter, K. (2005) · Journal of Materials Chemistry · doi:10.1039/b417803n · Cited by 1,452
Towards sustainable and versatile energy storage devices: an overview of organic electrode materials
Song, Z., & Zhou, H. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40709h · Cited by 1,443
Wu, H., Yu, G., Pan, L., Liu, N., McDowell, M. T., Bao, Z., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms2941 · Cited by 1,378
Choi, S., Kwon, T.-W., Coskun, A., & Choi, J. W. (2017) · Science · doi:10.1126/science.aal4373 · Cited by 1,338
New Approaches for High Energy Density Lithium–Sulfur Battery Cathodes
Evers, S., & Nazar, L. F. (2013) · Accounts of Chemical Research · doi:10.1021/ar3001348 · Cited by 1,324
Wang, C., Wu, H., Chen, Z., McDowell, M. T., Cui, Y., & Bao, Z. (2013) · Nature Chemistry · doi:10.1038/nchem.1802 · Cited by 1,269
Anchoring Hydrous RuO2 on Graphene Sheets for High‐Performance Electrochemical Capacitors
Wu, Z., Wang, D., Ren, W., Zhao, J., Zhou, G., Li, F., & Cheng, H. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001054 · Cited by 1,209
Cui, L.-F., Ruffo, R., Chan, C. K., Peng, H., & Cui, Y. (2009) · Nano Letters · doi:10.1021/nl8036323 · Cited by 1,187
Single lithium-ion conducting solid polymer electrolytes: advances and perspectives
Zhang, H., Li, C., Piszcz, M., Coya, E., Rojo, T., Rodriguez-Martinez, L. M., Armand, M., & Zhou, Z. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00491a · Cited by 1,187
Recent Advances and Prospects of Cathode Materials for Sodium‐Ion Batteries
Xiang, X., Zhang, K., & Chen, J. (2015) · Advanced Materials · doi:10.1002/adma.201501527 · Cited by 1,160
Polymer-Silicate Nanocomposites: Model Systems for Confined Polymers and Polymer Brushes
Giannelis, E. P., Krishnamoorti, R., & Manias, E. (1999) · Advances in Polymer Science · doi:10.1007/3-540-69711-x_3 · Cited by 1,129
Potential of lithium-ion batteries in renewable energy
Diouf, B., & Pode, R. (2015) · Renewable Energy · doi:10.1016/j.renene.2014.11.058 · Cited by 1,120
Toward Efficient Binders for Li-Ion Battery Si-Based Anodes: Polyacrylic Acid
Magasinski, A., Zdyrko, B., Kovalenko, I., Hertzberg, B., Burtovyy, R., Huebner, C. F., Fuller, T. F., Luzinov, I., & Yushin, G. (2010) · ACS Applied Materials & Interfaces · doi:10.1021/am100871y · Cited by 1,101
You, Y., Wu, X.-L., Yin, Y.-X., & Guo, Y.-G. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee44004d · Cited by 1,101
Islam, M. S., & Fisher, C. A. J. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60199d · Cited by 1,079
A review of advanced and practical lithium battery materials
Marom, R., Amalraj, S. F., Leifer, N., Jacob, D., & Aurbach, D. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm04225k · Cited by 1,075
Mechanically robust, readily repairable polymers via tailored noncovalent cross-linking
Yanagisawa, Y., Nan, Y., Okuro, K., & Aida, T. (2018) · Science · doi:10.1126/science.aam7588 · Cited by 1,073
A Brief Review on Electrode Materials for Supercapacitor
Iro, Z. S., Subramani, C., & Dash, S. S. (2016) · International Journal of Electrochemical Science · doi:10.20964/2016.12.50 · Cited by 1,069
Nanostructured conductive polymers for advanced energy storage
Shi, Y., Peng, L., Ding, Y., Zhao, Y., & Yu, G. (2015) · Chemical Society Reviews · doi:10.1039/c5cs00362h · Cited by 932
Nonaqueous Li–Air Batteries: A Status Report
Luntz, A. C., & McCloskey, B. D. (2014) · Chemical Reviews · doi:10.1021/cr500054y · Cited by 925
Origin of voltage decay in high-capacity layered oxide electrodes
Sathiya, M., Abakumov, A. M., Foix, D., Rousse, G., Ramesha, K., Saubanère, M., Doublet, M. L., Vezin, H., Laisa, C. P., Prakash, A. S., et al. (2015) · Nature Materials · doi:10.1038/nmat4137 · Cited by 922
Complex formation between poly(ethylene glycol) and α-cyclodextrin
Harada, A., & Kamachi, M. (1990) · Macromolecules · doi:10.1021/ma00212a039 · Cited by 895
An, K. H., Kim, W. S., Park, Y. S., Moon, J.-M., Bae, D. J., Lim, S. C., Lee, Y. S., & Lee, Y. H. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200110)11:5<387::aid-adfm387>3.0.co;2-g · Cited by 890
Improving the Performance of Lithium–Sulfur Batteries by Conductive Polymer Coating
Yang, Y., Yu, G., Cha, J. J., Wu, H., Vosgueritchian, M., Yao, Y., Bao, Z., & Cui, Y. (2011) · ACS Nano · doi:10.1021/nn203436j · Cited by 866
Activated Graphene-Based Carbons as Supercapacitor Electrodes with Macro- and Mesopores
Kim, T., Jung, G., Yoo, S., Suh, K. S., & Ruoff, R. S. (2013) · ACS Nano · doi:10.1021/nn402077v · Cited by 866
An Amorphous Red Phosphorus/Carbon Composite as a Promising Anode Material for Sodium Ion Batteries
Kim, Y., Park, Y., Choi, A., Choi, N., Kim, J., Lee, J., Ryu, J. H., Oh, S. M., & Lee, K. T. (2013) · Advanced Materials · doi:10.1002/adma.201204877 · Cited by 854
Cheng, S., Liu, H., & Logan, B. E. (2006) · Environmental Science & Technology · doi:10.1021/es0512071 · Cited by 850
A review of polymer electrolytes: fundamental, approaches and applications
Ngai, K. S., Ramesh, S., Ramesh, K., & Juan, J. C. (2016) · Ionics · doi:10.1007/s11581-016-1756-4 · Cited by 779
Practical Handbook of Physical Properties of Rocks and Minerals (1988)
Carmichael, R. S. (2017) · CRC Press eBooks · doi:10.1201/9780203710968 · Cited by 777
Review—Practical Issues and Future Perspective for Na-Ion Batteries
Kubota, K., & Komaba, S. (2015) · Journal of The Electrochemical Society · doi:10.1149/2.0151514jes · Cited by 775
Zhao, C., Liu, L., Qi, X., Lu, Y., Wu, F., Zhao, J., Yu, Y., Hu, Y., & Chen, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201703012 · Cited by 738
A review of application of carbon nanotubes for lithium ion battery anode material
de las Casas, C., & Li, W. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.013 · Cited by 730
Electrochemical intercalation of sodium in graphite
GE, P. (1988) · Solid State Ionics · doi:10.1016/0167-2738(88)90351-7 · Cited by 726
Review on application of PEDOTs and PEDOT:PSS in energy conversion and storage devices
Sun, K., Zhang, S., Li, P., Xia, Y., Zhang, X., Du, D., Isikgor, F. H., & Ouyang, J. (2015) · Journal of Materials Science: Materials in Electronics · doi:10.1007/s10854-015-2895-5 · Cited by 648
Self-citationGraphene-modified LiFePO4 cathode for lithium ion battery beyond theoretical capacity
Lung-Hao Hu, B., Wu, F.-Y., Lin, C.-T., Khlobystov, A. N., & Li, L.-J. (2013) · Nature Communications · doi:10.1038/ncomms2705 · Cited by 645
Tabor, D. (1970) · Reviews of Physics in Technology · doi:10.1088/0034-6683/1/3/i01 · Cited by 636
Baldan, A. (2004) · Journal of Materials Science · doi:10.1023/b:jmsc.0000007726.58758.e4 · Cited by 625
Ryou, M., Kim, J., Lee, I., Kim, S., Jeong, Y. K., Hong, S., Ryu, J. H., Kim, T., Park, J., Lee, H., et al. (2013) · Advanced Materials · doi:10.1002/adma.201203981 · Cited by 622
The Application of Metal Sulfides in Sodium Ion Batteries
Xiao, Y., Lee, S. H., & Sun, Y. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601329 · Cited by 616
Lithium-Ion Batteries: Science and Technologies
(2009) · Springer eBooks · doi:10.1007/978-0-387-34445-4 · Cited by 594
Interpenetrated Gel Polymer Binder for High‐Performance Silicon Anodes in Lithium‐ion Batteries
Song, J., Zhou, M., Yi, R., Xu, T., Gordin, M. L., Tang, D., Yu, Z., Regula, M., & Wang, D. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401269 · Cited by 589
Metal–Sulfur Battery Cathodes Based on PAN–Sulfur Composites
Wei, S., Ma, L., Hendrickson, K. E., Tu, Z., & Archer, L. A. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b08113 · Cited by 579
Polymers with Tailored Electronic Structure for High Capacity Lithium Battery Electrodes
Liu, G., Xun, S., Vukmirovic, N., Song, X., Olalde‐Velasco, P., Zheng, H., Battaglia, V. S., Wang, L., & Yang, W. (2011) · Advanced Materials · doi:10.1002/adma.201102421 · Cited by 576
Self-citationYan, J., Wei, T., Fan, Z., Qian, W., Zhang, M., Shen, X., & Wei, F. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.11.028 · Cited by 569
Sathiya, M., Hemalatha, K., Ramesha, K., Tarascon, J.-M., & Prakash, A. S. (2012) · Chemistry of Materials · doi:10.1021/cm300466b · Cited by 564
The emerging era of supramolecular polymeric binders in silicon anodes
Kwon, T.-W., Choi, J. W., & Coskun, A. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00858a · Cited by 560
Advances in conductive polymers
Kumar, D., & Sharma, R. C. (1998) · European Polymer Journal · doi:10.1016/s0014-3057(97)00204-8 · Cited by 532
Shim, J. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00363-4 · Cited by 519
Electrochemical Insertion of Sodium into Carbon
Doeff, M. M., Ma, Y., Visco, S. J., & De Jonghe, L. C. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221153 · Cited by 514
Buqa, H., Holzapfel, M., Krumeich, F., Veit, C., & Novák, P. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.073 · Cited by 513
Key Parameters Governing the Reversibility of Si/Carbon/CMC Electrodes for Li-Ion Batteries
Bridel, J.-S., Azaïs, T., Morcrette, M., Tarascon, J.-M., & Larcher, D. (2010) · Chemistry of Materials · doi:10.1021/cm902688w · Cited by 499
Higgins, T. M., Park, S.-H., King, P. J., Zhang, C. (., McEvoy, N., Berner, N. C., Daly, D., Shmeliov, A., Khan, U., Duesberg, G., et al. (2016) · ACS Nano · doi:10.1021/acsnano.6b00218 · Cited by 481
High-temperature storage and cycling of C-LiFePO4/graphite Li-ion cells
Amine, K., Liu, J., & Belharouak, I. (2005) · Electrochemistry Communications · doi:10.1016/j.elecom.2005.04.018 · Cited by 480
Influence of molecular weight and molecular weight distribution on mechanical properties of polymers
Nunes, R. W., Martin, J. R., & Johnson, J. F. (1982) · Polymer Engineering & Science · doi:10.1002/pen.760220402 · Cited by 473
Production, recovery and applications of xanthan gum by Xanthomonas campestris
Palaniraj, A., & Jayaraman, V. (2011) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2011.03.035 · Cited by 465
Preparation and properties of inclusion complexes of polyethylene glycol with .alpha.-cyclodextrin
Harada, A., Li, J., & Kamachi, M. (1993) · Macromolecules · doi:10.1021/ma00073a026 · Cited by 455
A Robust Ion‐Conductive Biopolymer as a Binder for Si Anodes of Lithium‐Ion Batteries
Liu, J., Zhang, Q., Zhang, T., Li, J., Huang, L., & Sun, S. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201500589 · Cited by 452
Hochgatterer, N. S., Schweiger, M. R., Koller, S., Raimann, P. R., Wöhrle, T., Wurm, C., & Winter, M. (2008) · Electrochemical and Solid-State Letters · doi:10.1149/1.2888173 · Cited by 449
Stable cycling of lithium sulfide cathodes through strong affinity with a bifunctional binder
Seh, Z. W., Zhang, Q., Li, W., Zheng, G., Yao, H., & Cui, Y. (2013) · Chemical Science · doi:10.1039/c3sc51476e · Cited by 442
Thermal Stability Studies of Li‐Ion Cells and Components
Maleki, H., Deng, G., Anani, A., & Howard, J. (1999) · Journal of The Electrochemical Society · doi:10.1149/1.1392458 · Cited by 437
Pasquier, A. D., Disma, F., Bowmer, T., Gozdz, A. S., Amatucci, G., & Tarascon, J. ‐. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838287 · Cited by 436
Wearable Textile Battery Rechargeable by Solar Energy
Lee, Y.-H., Kim, J.-S., Noh, J., Lee, I., Kim, H. J., Choi, S., Seo, J., Jeon, S., Kim, T.-S., Lee, J.-Y., et al. (2013) · Nano Letters · doi:10.1021/nl403860k · Cited by 430
Small things make a big difference: binder effects on the performance of Li and Na batteries
Chou, S.-L., Pan, Y., Wang, J.-Z., Liu, H.-K., & Dou, S.-X. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp02475c · Cited by 428
Four-parameter equation for predicting enthalpies of adduct formation
Drago, R. S., Vogel, G. C., & Needham, T. E. (1971) · Journal of the American Chemical Society · doi:10.1021/ja00752a010 · Cited by 418
Redox reaction of Sn-polyacrylate electrodes in aprotic Na cell
Komaba, S., Matsuura, Y., Ishikawa, T., Yabuuchi, N., Murata, W., & Kuze, S. (2012) · Electrochemistry Communications · doi:10.1016/j.elecom.2012.05.017 · Cited by 418
High‐Capacity Cathode Material with High Voltage for Li‐Ion Batteries
Shi, J., Xiao, D., Ge, M., Yu, X., Chu, Y., Huang, X., Zhang, X., Yin, Y., Yang, X., Guo, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705575 · Cited by 415
Shi, Y., Wang, M., Ma, C., Wang, Y., Li, X., & Yu, G. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b03069 · Cited by 412
Study on Polymer Binders for High-Capacity SiO Negative Electrode of Li-Ion Batteries
Komaba, S., Shimomura, K., Yabuuchi, N., Ozeki, T., Yui, H., & Konno, K. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp201691g · Cited by 405
Toward an Ideal Polymer Binder Design for High-Capacity Battery Anodes
Wu, M., Xiao, X., Vukmirovic, N., Xun, S., Das, P. K., Song, X., Olalde-Velasco, P., Wang, D., Weber, A. Z., Wang, L.-W., et al. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4054465 · Cited by 398
Self-citationZeng, W., Wang, L., Peng, X., Liu, T., Jiang, Y., Qin, F., Hu, L., Chu, P. K., Huo, K., & Zhou, Y. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702314 · Cited by 389
Ultrathin, transparent, and flexible graphene films for supercapacitor application
Yu, A., Roes, I., Davies, A., & Chen, Z. (2010) · Applied Physics Letters · doi:10.1063/1.3455879 · Cited by 385
Zheng, J., Gu, M. D., Xiao, J., Zuo, P., Wang, C., & Zhang, J. (2013) · Nano Letters · doi:10.1021/nl401849t · Cited by 383
Chen, W., Qian, T., Xiong, J., Xu, N., Liu, X., Liu, J., Zhou, J., Shen, X., Yang, T., Chen, Y., et al. (2017) · Advanced Materials · doi:10.1002/adma.201605160 · Cited by 382
Li, J., Wu, Z., Lü, Y., Zhou, Y., Huang, Q., Huang, L., & Sun, S. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201701185 · Cited by 381
Polythiophene-based supercapacitors
Laforgue, A., Simon, P., Sarrazin, C., & Fauvarque, J.-F. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00258-4 · Cited by 379
Poly(vinyl alcohol) properties and applications
Park, G. S. (1974) · Polymer · doi:10.1016/0032-3861(74)90049-4 · Cited by 379
Chen, W., Lei, T., Qian, T., Lv, W., He, W., Wu, C., Liu, X., Liu, J., Chen, B., Yan, C., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702889 · Cited by 362
Shi, Y., Zhou, X., & Yu, G. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00402 · Cited by 361
Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries
Cao, Y., Li, X., Aksay, I. A., Lemmon, J., Nie, Z., Yang, Z., & Liu, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02477e · Cited by 356
Exploiting a robust biopolymer network binder for an ultrahigh-areal-capacity Li–S battery
Liu, J., Galpaya, D. G. D., Yan, L., Sun, M., Lin, Z., Yan, C., Liang, C., & Zhang, S. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03033e · Cited by 347
Self-citationOn safety of lithium-ion cells
Biensan, P., Simon, B. M., Pérès, J.-P., de Guibert, A., Broussely, M., Bodet, J. M., & Perton, F. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(99)00135-4 · Cited by 342
Life cycle assessment of sodium-ion batteries
Peters, J., Buchholz, D., Passerini, S., & Weil, M. (2016) · Energy & Environmental Science · doi:10.1039/c6ee00640j · Cited by 340
Jiang, C., Wei, M., Qi, Z., et al. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.01.004 · Cited by 337
FTIR studies of chitosan acetate based polymer electrolytes
Osman, Z., & Arof, A. K. (2003) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00812-5 · Cited by 337
Adhesion and Friction Mechanisms of Polymer-on-Polymer Surfaces
Maeda, N., Chen, N., Tirrell, M., & Israelachvili, J. N. (2002) · Science · doi:10.1126/science.1072378 · Cited by 337
Enhanced Cycle Life of Si Anode for Li-Ion Batteries by Using Modified Elastomeric Binder
Liu, W., Yang, M., Wu, H., Chiao, S., & Wu, N. (2005) · Electrochemical and Solid-State Letters · doi:10.1149/1.1847685 · Cited by 336
Failure mechanisms of single-crystal silicon electrodes in lithium-ion batteries
Shi, F., Song, Z., Ross, P. N., Somorjai, G. A., Ritchie, R. O., & Komvopoulos, K. (2016) · Nature Communications · doi:10.1038/ncomms11886 · Cited by 332
Jeong, Y. K., Kwon, T., Lee, I., Kim, T., Coşkun, A., & Choi, J. W. (2014) · Nano Letters · doi:10.1021/nl404237j · Cited by 318
Liu, Y., Tai, Z., Zhou, T., Sencadas, V., Zhang, J., Zhang, L., Konstantinov, K., Guo, Z., & Liu, H. K. (2017) · Advanced Materials · doi:10.1002/adma.201703028 · Cited by 315
Nazar, L. F., Cuisinier, M., & Pang, Q. (2014) · MRS Bulletin · doi:10.1557/mrs.2014.86 · Cited by 314
Li, J., Xie, H., Li, Y., Liu, J., & Li, Z. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.08.105 · Cited by 304
Dual-functional gum arabic binder for silicon anodes in lithium ion batteries
Ling, M., Xu, Y., Zhao, H., Gu, X., Qiu, J., Li, S., Wu, M., Song, X., Yan, C., Liu, G., et al. (2015) · Nano Energy · doi:10.1016/j.nanoen.2014.12.011 · Cited by 291
Self-citationLow Cost, Environmentally Benign Binders for Lithium-Ion Batteries
Lux, S. F., Schappacher, F., Balducci, A., Passerini, S., & Winter, M. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3291976 · Cited by 289
Reduced polysulfide shuttle in lithium–sulfur batteries using Nafion-based separators
Bauer, I., Thieme, S., Brückner, J., Althues, H., & Kaskel, S. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.090 · Cited by 288
Photocatalytic Synthesis of TiO2 and Reduced Graphene Oxide Nanocomposite for Lithium Ion Battery
Qiu, J., Zhang, P., Ling, M., Li, S., Liu, P., Zhao, H., & Zhang, S. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am300722d · Cited by 287
Self-citationSolvent-Free Manufacturing of Electrodes for Lithium-ion Batteries
Ludwig, B., Zheng, Z., Shou, W., Wang, Y., & Pan, H. (2016) · Scientific Reports · doi:10.1038/srep23150 · Cited by 280
Effect of high adhesive polyvinyl alcohol binder on the anodes of lithium ion batteries
Park, H.-K., Kong, B.-S., & Oh, E.-S. (2011) · Electrochemistry Communications · doi:10.1016/j.elecom.2011.06.034 · Cited by 277
Adhesion enhancement of polymer surfaces by atmospheric plasma treatment
Shenton, M. J., Lovell-Hoare, M. C., & Stevens, G. C. (2001) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/34/18/307 · Cited by 273
Wang, J., Yao, Z., Monroe, C. W., Yang, J., & Nuli, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201201847 · Cited by 266
Adinugraha, M. P., Marseno, D. W., & Haryadi (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.07.019 · Cited by 264
Chang, K., Wang, Z., Huang, G., Li, H., Chen, W., & Lee, J. Y. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.10.132 · Cited by 264
Cross-Linked Chitosan as an Efficient Binder for Si Anode of Li-ion Batteries
Chen, C., Lee, S. H., Cho, M., Kim, J., & Lee, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10673 · Cited by 260
Maqbool, M., Ali, A., Alderson, P. G., Mohamed, M. T. M., Siddiqui, Y., & Zahid, N. (2011) · Postharvest Biology and Technology · doi:10.1016/j.postharvbio.2011.04.002 · Cited by 259
On Adhesives and Adhesive Action
McBain, J. W., & Hopkins, D. G. (1925) · The Journal of Physical Chemistry · doi:10.1021/j150248a008 · Cited by 255
Acacia Senegal–Inspired Bifunctional Binder for Longevity of Lithium–Sulfur Batteries
Li, G., Ling, M., Ye, Y., Li, Z., Guo, J., Yao, Y., Zhu, J., Lin, Z., & Zhang, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500878 · Cited by 250
Self-citationPark, S.-J., Zhao, H., Ai, G., Wang, C., Song, X., Yuca, N., Battaglia, V. S., Yang, W., & Liu, G. (2015) · Journal of the American Chemical Society · doi:10.1021/ja511181p · Cited by 243
Self-citationXu, J., Chou, S., Gu, Q., Liu, H., & Dou, S. X. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.033 · Cited by 241
LiFePO4 water-soluble binder electrode for Li-ion batteries
Guerfi, A., Kaneko, M., Petitclerc, M., Mori, M., & Zaghib, K. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.09.067 · Cited by 239
Kwon, T.-W., Jeong, Y. K., Deniz, E., AlQaradawi, S. Y., Choi, J. W., & Coskun, A. (2015) · ACS Nano · doi:10.1021/acsnano.5b05030 · Cited by 239
Xu, W., Viswanathan, V. V., Wang, D., Towne, S. A., Xiao, J., Nie, Z., Hu, D., & Zhang, J.-G. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.12.065 · Cited by 237
Influence of carbon black and binder on Li-ion batteries
Fransson, L., Eriksson, T., Edström, K., Gustafsson, T., & Thomas, J. O. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(01)00481-5 · Cited by 232
Sun, Y., Lopez, J., Lee, H., Liu, N., Zheng, G., Wu, C., Sun, J., Liu, W., Chung, J. W., Bao, Z., et al. (2016) · Advanced Materials · doi:10.1002/adma.201504723 · Cited by 231
Carboxymethyl chitosan: A new water soluble binder for Si anode of Li-ion batteries
Lu, Y., Zhang, L., & Zhong, H. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.08.073 · Cited by 230
Dahbi, M., Nakano, T., Yabuuchi, N., Ishikawa, T., Kubota, K., Fukunishi, M., Shibahara, S., Son, J.-Y., Cui, Y.-T., Oji, H., et al. (2014) · Electrochemistry Communications · doi:10.1016/j.elecom.2014.04.014 · Cited by 228
Enhanced Cyclability for Sulfur Cathode Achieved by a Water-Soluble Binder
He, M., Yuan, L.-X., Zhang, W.-X., Hu, X.-L., & Huang, Y.-H. (2011) · The Journal of Physical Chemistry C · doi:10.1021/jp2043416 · Cited by 226
Polysulfide-Scission Reagents for the Suppression of the Shuttle Effect in Lithium–Sulfur Batteries
Hua, W., Yang, Z., Nie, H., Li, Z., Yang, J., Guo, Z., Ruan, C., Chen, X., & Huang, S. (2017) · ACS Nano · doi:10.1021/acsnano.6b08627 · Cited by 224
Battery-electric transit bus developments and operations: A review
Li, J.-Q. (2016) · International Journal of Sustainable Transportation · doi:10.1080/15568318.2013.872737 · Cited by 221
A high-performance alginate hydrogel binder for the Si/C anode of a Li-ion battery
Liu, J., Zhang, Q., Wu, Z.-Y., Wu, J.-H., Li, J.-T., Huang, L., & Sun, S.-G. (2014) · Chemical Communications · doi:10.1039/c4cc00081a · Cited by 220
Diagnostic Characterization of High Power Lithium-Ion Batteries for Use in Hybrid Electric Vehicles
Zhang, X., Ross, P. N., Kostecki, R., Kong, F., Sloop, S., Kerr, J. B., Striebel, K., Cairns, E. J., & McLarnon, F. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1362541 · Cited by 218
Shi, Y., Zhang, J., Bruck, A. M., Zhang, Y., Li, J., Stach, E. A., Takeuchi, K. J., Marschilok, A. C., Takeuchi, E. S., & Yu, G. (2017) · Advanced Materials · doi:10.1002/adma.201603922 · Cited by 217
Metal-polymer interfaces: Adhesion and x-ray photoemission studies
Burkstrand, J. M. (1981) · Journal of Applied Physics · doi:10.1063/1.329320 · Cited by 209
Use of natural binders and ionic liquid electrolytes for greener and safer lithium-ion batteries
Kim, G. T., Jeong, S. S., Joost, M., Rocca, E., Winter, M., Passerini, S., & Balducci, A. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.09.080 · Cited by 201
Krishnaiah, Y. S. R., Satyanarayana, V, Dinesh Kumar, B., & Karthikeyan, R. S. (2002) · European Journal of Pharmaceutical Sciences · doi:10.1016/s0928-0987(02)00081-7 · Cited by 191
Conductive graphene oxide-polyacrylic acid (GOPAA) binder for lithium-sulfur battery
Xu, G., Yan, Q.-B., Kushima, A., Zhang, X., Pan, J., & Li, J. (2017) · Nano Energy · doi:10.1016/j.nanoen.2016.12.002 · Cited by 191
Application of gelatin as a binder for the sulfur cathode in lithium–sulfur batteries
Sun, J., Huang, Y., Wang, W., Yu, Z., Wang, A., & Yuan, K. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.05.022 · Cited by 188
Review of recent achievements in self-healing conductive materials and their applications
Zhang, Q., Liu, L., Pan, C., & Li, D. (2018) · Journal of Materials Science · doi:10.1007/s10853-017-1388-8 · Cited by 187
Kwon, T., Jeong, Y. K., Lee, I., Kim, T., Choi, J. W., & Coskun, A. (2014) · Advanced Materials · doi:10.1002/adma.201402950 · Cited by 184
Zhou, X., Shen, X., Xia, Z., Zhang, Z., Li, J., Ma, Y., & Qu, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b05989 · Cited by 184
Advanced Characterization Techniques for Sodium‐Ion Battery Studies
Shadike, Z., Zhao, E., Zhou, Y., Yu, X., Yang, Y., Hu, E., Bak, S., Gu, L., & Yang, X. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201702588 · Cited by 181
Liu, G., Zheng, H., Kim, S. C., Deng, Y., Minor, A. M., Song, X., & Battaglia, V. S. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2976031 · Cited by 177
Self-citationZhang, S. S., & Jow, T. R. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(02)00107-6 · Cited by 171
Self-citationFlexible tag microlab development: Gas sensors integration in RFID flexible tags for food logistic
ABAD, E., ZAMPOLLI, S., MARCO, S., SCORZONI, A., MAZZOLAI, B., JUARROS, A., GOMEZ, D., ELMI, I., CARDINALI, G., & GOMEZ, J. (2007) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2007.07.007 · Cited by 165
High capacity and low cost spinel Fe 3 O 4 for the Na-ion battery negative electrode materials
Kumar, P. R., Jung, Y. H., Bharathi, K. K., Lim, C. H., & Kim, D. K. (2014) · Electrochimica Acta · doi:10.1016/j.electacta.2014.09.081 · Cited by 164
Shi, Y., Zhou, X., Zhang, J., Bruck, A. M., Bond, A. C., Marschilok, A. C., Takeuchi, K. J., Takeuchi, E. S., & Yu, G. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b05227 · Cited by 160
Preparation and performances of LiFePO4 cathode in aqueous solvent with polyacrylic acid as a binder
Cai, Z., Liang, Y., Li, W. S., Xing, L., & Liao, Y. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.040 · Cited by 159
Chai, L., Qu, Q., Zhang, L., et al. (2013) · Electrochimica Acta · doi:10.1016/j.electacta.2013.05.009 · Cited by 155
Javier, A. E., Patel, S. N., Hallinan, D. T., Srinivasan, V., & Balsara, N. P. (2011) · Angewandte Chemie International Edition · doi:10.1002/anie.201102953 · Cited by 154
Papp, J. K., Forster, J. D., Burke, C. M., Kim, H. W., Luntz, A. C., Shelby, R. M., Urban, J. J., & McCloskey, B. D. (2017) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.7b00040 · Cited by 149
Yoon, J., Oh, D. X., Jo, C., Lee, J., & Hwang, D. S. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c4cp03499f · Cited by 147
Influence of the PVdF binder on the stability of LiCoO2 electrodes
Markevich, E., Salitra, G., & Aurbach, D. (2005) · Electrochemistry Communications · doi:10.1016/j.elecom.2005.09.010 · Cited by 143
Ling, M., Zhang, L., Zheng, T., Feng, J., Guo, J., Mai, L., & Liu, G. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.05.020 · Cited by 141
Self-citationWang, R., Feng, L., Yang, W. R., Zhang, Y., Zhang, Y., Bai, W., Liu, B., Zhang, W., Chuan, Y., Zheng, Z., et al. (2017) · Nanoscale Research Letters · doi:10.1186/s11671-017-2348-6 · Cited by 141
Lee, J.-H., Paik, U., Hackley, V. A., & Choi, Y.-M. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.03.087 · Cited by 137
Zhao, E., Chen, M., Hu, Z., Chen, D., Yang, L., & Xiao, X. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.01.066 · Cited by 137
Jabbour, L., Gerbaldi, C., Chaussy, D., Zeno, E., Bodoardo, S., & Beneventi, D. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm01219j · Cited by 136
Li, C., & Wang, Y.-W. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.107112jes · Cited by 129
Effect of Heat Treatment on Si Electrodes Using Polyvinylidene Fluoride Binder
Li, J., Christensen, L., Obrovac, M. N., et al. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2830545 · Cited by 128
Aslan, M., Weingarth, D., Jäckel, N., Atchison, J. S., Grobelsek, I., & Presser, V. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.05.031 · Cited by 127
Perkins, W. G., Capiati, N. J., & Porter, R. S. (1976) · Polymer Engineering and Science · doi:10.1002/pen.760160313 · Cited by 126
Functional interface of polymer modified graphite anode
Komaba, S., Ozeki, T., & Okushi, K. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.09.092 · Cited by 126
Chen, Z., Christensen, L., & Dahn, J. R. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1586922 · Cited by 125
Schneider, H., Garsuch, A., Panchenko, A. A., et al. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.12.061 · Cited by 123
Cheon, S.-E., Cho, J., Ko, K.-S., et al. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1511187 · Cited by 123
Carboxymethylcellulose. Uses and Applications
Hollabaugh, C. B., Burt, L. H., & Walsh, A. P. (1945) · Industrial & Engineering Chemistry · doi:10.1021/ie50430a015 · Cited by 121
Stability of polymer binders in Li–O 2 batteries
Nasybulin, E. N., Xu, W., Engelhard, M., Nie, Z., Li, X. S., & Zhang, J. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.097 · Cited by 118
Why PEO as a binder or polymer coating increases capacity in the Li–S system
Lacey, M. J., Jeschull, F., Edström, K., et al. (2013) · Chemical Communications · doi:10.1039/c3cc44772c · Cited by 112
Functionalized Exfoliated Graphene Oxide as Supercapacitor Electrodes
Karthika, P., Rajalakshmi, N., & Dhathathreyan, K. S. (2012) · Soft Nanoscience Letters · doi:10.4236/snl.2012.24011 · Cited by 111
Rapid Thermal Annealing of Cathode-Garnet Interface toward High-Temperature Solid State Batteries
Liu, B., Fu, K. K., Gong, Y., Yang, C., Yao, Y., Wang, Y., Wang, C., Kuang, Y., Pastel, G., Xie, H., et al. (2017) · Nano Letters · doi:10.1021/acs.nanolett.7b01934 · Cited by 110
Cited by
Sustainable Recycling Technology for Li-Ion Batteries and Beyond: Challenges and Future Prospects
Fan, E., Li, L., Wang, Z., Lin, J., Huang, Y., Yao, Y., Chen, R., & Wu, F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00535 · Cited by 2,020
Designing polymers for advanced battery chemistries
Lopez, J., Mackanic, D. G., Cui, Y., & Bao, Z. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0103-6 · Cited by 894
Lithium-ion batteries – Current state of the art and anticipated developments
Armand, M., Axmann, P., Bresser, D., Copley, M., Edström, K., Ekberg, C., Guyomard, D., Lestriez, B., Novák, P., Petranikova, M., et al. (2020) · Journal of Power Sources · doi:10.1016/j.jpowsour.2020.228708 · Cited by 888
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Hard Carbon Anodes for Next‐Generation Li‐Ion Batteries: Review and Perspective
Xie, L., Tang, C., Bi, Z., Song, M., Fan, Y., Yan, C., Li, X., Su, F., Zhang, Q., & Chen, C. (2021) · Advanced Energy Materials · doi:10.1002/aenm.202101650 · Cited by 617
Metadata
- Authors
- Chen, H., Ling, M., Hencz, L., Ling, H. Y., Li, G., Lin, Z., Liu, G., & Zhang, S.
- Venue
- Chemical Reviews
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-08-22
- Volume
- 118
- Issue
- 18
- Pages
- 8936-8982
- ISSN
- 0009-2665 (ISSN-L)
- 1520-6890
- OpenAlex
- W2888404514
- Cited by
- 958
- References
- 246
- FWCI
- 5.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.