The DOI matches its Crossref record; 360 of the 360 references it cites were found in a registry or an index.
CO2 Post-combustion Capture: A Critical Review of Current Technologies and Future Directions
Abstract
As the global imperative to CO 2 emissions intensifies, carbon capture and storage (CCS) technologies, particularly CO 2 post-combustion capture, emerge as essential components in the transition toward a sustainable, low-carbon future. This review offers an exhaustive examination of the current state-of-the-art and recent advancements in CO 2 post-combustion capture techniques, including absorption, adsorption, membrane and cryogenic technologies. It presents an in-depth analysis aimed at understanding their relative efficiencies, challenges, and potentials in contributing to global CO 2 reduction goals. The review methodically evaluates each capture technique, starting with solvent-based absorption, which benefits from extensive research and industrial application but faces challenges, such as a high energy demand for solvent regeneration and environmental concerns. It then transitions to adsorption-based methods, highlighting their advantages in terms of energy efficiency, alongside the development of novel adsorbents that offer improved capacity and selectivity. Membrane technologies are also explored, with a focus on their potential for low-energy separation and the ongoing innovations aimed at enhancing their permeability and selectivity for CO 2 . Finally, cryogenic separation is discussed for its ability to achieve high-purity CO 2 capture through low-temperature processes, addressing specific operational challenges. The review promotes a multidisciplinary approach that combines advancements in chemical engineering, materials science, and environmental policy to accelerate the deployment of efficient and cost-effective CO 2 post-combustion capture technologies. Specifically, it emphasizes the need for continued research/development and enhanced collaboration/innovation within the scientific community and industry players to address the scalability, economic viability, and environmental impact of these technologies, ensuring that they can effectively contribute to the decarbonization of the energy sector.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Exceptional chemical and thermal stability of zeolitic imidazolate frameworks
Park, K. S., Ni, Z., Côté, A. P., Choi, J. Y., Huang, R., Uribe-Romo, F. J., Chae, H. K., O’Keeffe, M., & Yaghi, O. M. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0602439103 · Cited by 7,563
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
How a century of ammonia synthesis changed the world
Erisman, J. W., Sutton, M. A., Galloway, J., Klimont, Z., & Winiwarter, W. (2008) · Nature Geoscience · doi:10.1038/ngeo325 · Cited by 4,607
Carbon capture and storage (CCS): the way forward
Bui, M., Adjiman, C. S., Bardow, A., Anthony, E. J., Boston, A., Brown, S., Fennell, P. S., Fuss, S., Galindo, A., Hackett, L. A., et al. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02342a · Cited by 4,374
An overview of current status of carbon dioxide capture and storage technologies
Leung, D. Y. C., Caramanna, G., & Maroto-Valer, M. M. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.093 · Cited by 3,198
Modification of the surface chemistry of activated carbons
Figueiredo, J. L., Pereira, M. F. R., Freitas, M. M. A., & Órfão, J. J. M. (1999) · Carbon · doi:10.1016/s0008-6223(98)00333-9 · Cited by 2,935
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Carbon capture and storage update
Boot-Handford, M. E., Abanades, J. C., Anthony, E. J., Blunt, M. J., Brandani, S., Mac Dowell, N., Fernández, J. R., Ferrari, M.-C., Gross, R., Hallett, J. P., et al. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42350f · Cited by 2,386
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
CO2 Capture by a Task-Specific Ionic Liquid
Bates, E. D., Mayton, R. D., Ntai, I., & Davis, J. H. (2002) · Journal of the American Chemical Society · doi:10.1021/ja017593d · Cited by 2,270
Green processing using ionic liquids and CO2
Blanchard, L. A., Hancu, D., Beckman, E. J., & Brennecke, J. F. (1999) · Nature · doi:10.1038/19887 · Cited by 2,008
Post-Combustion CO 2 Capture Using Solid Sorbents: A Review
Samanta, A., Zhao, A., Shimizu, G. K. H., Sarkar, P., & Gupta, R. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200686q · Cited by 1,889
A Review of CO2 Capture by Absorption and Adsorption
Yu, C.-H., Huang, C.-H., & Tan, C.-S. (2012) · Aerosol and Air Quality Research · doi:10.4209/aaqr.2012.05.0132 · Cited by 1,730
Oxy-fuel combustion technology for coal-fired power generation
Buhre, B. J. P., Elliott, L. K., Sheng, C. D., Gupta, R. P., & Wall, T. F. (2005) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2005.07.001 · Cited by 1,542
Why Is CO2 So Soluble in Imidazolium-Based Ionic Liquids?
Cadena, C., Anthony, J. L., Shah, J. K., Morrow, T. I., Brennecke, J. F., & Maginn, E. J. (2004) · Journal of the American Chemical Society · doi:10.1021/ja039615x · Cited by 1,518
Post-combustion CO2 capture with chemical absorption: A state-of-the-art review
Wang, M., Lawal, A., Stephenson, P., Sidders, J., & Ramshaw, C. (2011) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2010.11.005 · Cited by 1,458
Industrial carbon dioxide capture and utilization: state of the art and future challenges
Gao, W., Liang, S., Wang, R., Jiang, Q., Zhang, Y., Zheng, Q., Xie, B., Toe, C. Y., Zhu, X., Wang, J., et al. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00025f · Cited by 1,388
Kinetics of carbamate formation and breakdown
Caplow, M. (1968) · Journal of the American Chemical Society · doi:10.1021/ja01026a041 · Cited by 1,365
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Xu, X., Song, C., Andresen, J. M., Miller, B. G., & Scaroni, A. W. (2002) · Energy & Fuels · doi:10.1021/ef020058u · Cited by 1,097
Sustainable porous carbons with a superior performance for CO2 capture
Sevilla, M., & Fuertes, A. B. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00784f · Cited by 1,088
State-of-the-Art of CO2Capture with Ionic Liquids
Ramdin, M., de Loos, T. W., & Vlugt, T. J. H. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3003705 · Cited by 1,073
Mason, J. A., Sumida, K., Herm, Z. R., Krishna, R., & Long, J. R. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01720a · Cited by 1,072
Progress and trends in CO2 capture/separation technologies: A review
Mondal, M. K., Balsora, H. K., & Varshney, P. (2012) · Energy · doi:10.1016/j.energy.2012.08.006 · Cited by 1,019
The cost of CO2 capture and storage
Rubin, E. S., Davison, J. E., & Herzog, H. J. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.05.018 · Cited by 1,008
Ionic-Liquid-Based CO2 Capture Systems: Structure, Interaction and Process
Zeng, S., Zhang, X., Bai, L., Zhang, X., Wang, H., Wang, J., Bao, D., Li, M., Liu, X., & Zhang, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00072 · Cited by 1,000
Carbon dioxide storage through mineral carbonation
Snæbjörnsdóttir, S. Ó., Sigfússon, B., Marieni, C., Goldberg, D., Gislason, S. R., & Oelkers, E. H. (2020) · Nature Reviews Earth & Environment · doi:10.1038/s43017-019-0011-8 · Cited by 977
Equimolar CO2 Absorption by Anion-Functionalized Ionic Liquids
Gurkan, B. E., de la Fuente, J. C., Mindrup, E. M., Ficke, L. E., Goodrich, B. F., Price, E. A., Schneider, W. F., & Brennecke, J. F. (2010) · Journal of the American Chemical Society · doi:10.1021/ja909305t · Cited by 914
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Recent advances in carbon capture storage and utilisation technologies: a review
Osman, A. I., Hefny, M., Abdel Maksoud, M. I. A., Elgarahy, A. M., & Rooney, D. W. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01133-3 · Cited by 862
Abu-Zahra, M. R. M., Niederer, J. P. M., Feron, P. H. M., & Versteeg, G. F. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00032-1 · Cited by 857
Gür, T. M. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100965 · Cited by 821
Carbon nanotube catalysts: recent advances in synthesis, characterization and applications
Yan, Y., Miao, J., Yang, Z., Xiao, F.-X., Yang, H. B., Liu, B., & Yang, Y. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00492b · Cited by 798
Pre-combustion, post-combustion and oxy-combustion in thermal power plant for CO2 capture
Kanniche, M., Gros-Bonnivard, R., Jaud, P., Valle-Marcos, J., Amann, J.-M., & Bouallou, C. (2010) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2009.05.005 · Cited by 796
Review of recent advances in carbon dioxide separation and capture
Kenarsari, S. D., Yang, D., Jiang, G., Zhang, S., Wang, J., Russell, A. G., Wei, Q., & Fan, M. (2013) · RSC Advances · doi:10.1039/c3ra43965h · Cited by 784
Abu-Zahra, M. R. M., Schneiders, L. H. J., Niederer, J. P. M., Feron, P. H. M., & Versteeg, G. F. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(06)00007-7 · Cited by 764
Zhang, Q., Huang, J., Qian, W., Zhang, Y., & Wei, F. (2013) · Small · doi:10.1002/smll.201203252 · Cited by 759
A review on production of metal organic frameworks (MOF) for CO2 adsorption
Ghanbari, T., Abnisa, F., & Wan Daud, W. M. A. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.135090 · Cited by 723
Broad threat to humanity from cumulative climate hazards intensified by greenhouse gas emissions
Mora, C., Spirandelli, D., Franklin, E. C., Lynham, J., Kantar, M. B., Miles, W., Smith, C. Z., Freel, K., Moy, J., Louis, L. V., et al. (2018) · Nature Climate Change · doi:10.1038/s41558-018-0315-6 · Cited by 711
Progress in carbon capture technologies
Wilberforce, T., Olabi, A. G., Sayed, E. T., Elsaid, K., & Abdelkareem, M. A. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.143203 · Cited by 710
Adsorption of Carbon Dioxide for post-combustion capture: a review
Raganati, F., Miccio, F., & Ammendola, P. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c01618 · Cited by 661
Self-citationPost-combustion carbon capture
Chao, C., Deng, Y., Dewil, R., Baeyens, J., & Fan, X. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.110490 · Cited by 652
Cryogenic-based CO2 capture technologies: State-of-the-art developments and current challenges
Song, C., Liu, Q., Deng, S., Li, H., & Kitamura, Y. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.11.018 · Cited by 652
Use of monoethanolamine (MEA) for CO 2 capture in a global scenario: Consequences and alternatives
Luis, P. (2016) · Desalination · doi:10.1016/j.desal.2015.08.004 · Cited by 639
Dziejarski, B., Krzyżyńska, R., & Andersson, K. (2023) · Fuel · doi:10.1016/j.fuel.2023.127776 · Cited by 628
Porous Inorganic Membranes for CO2 Capture: Present and Prospects
Pera-Titus, M. (2014) · Chemical Reviews · doi:10.1021/cr400237k · Cited by 614
Carbon-Based Adsorbents for Postcombustion CO 2 Capture: A Critical Review
Creamer, A. E., & Gao, B. (2016) · Environmental Science & Technology · doi:10.1021/acs.est.6b00627 · Cited by 598
Flue gas treatment via CO2 adsorption
Sayari, A., Belmabkhout, Y., & Serna-Guerrero, R. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.007 · Cited by 594
A systematic review on CO2 capture with ionic liquids: Current status and future prospects
Aghaie, M., Rezaei, N., & Zendehboudi, S. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.07.004 · Cited by 594
Idem, R., Wilson, M., Tontiwachwuthikul, P., Chakma, A., Veawab, A., Aroonwilas, A., & Gelowitz, D. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050569e · Cited by 587
The outlook for improved carbon capture technology
Rubin, E. S., Mantripragada, H., Marks, A., Versteeg, P., & Kitchin, J. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2012.03.003 · Cited by 576
Reducing the Cost of CO 2 Capture from Flue Gases Using Pressure Swing Adsorption
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070831e · Cited by 566
Aqueous piperazine as the new standard for CO2 capture technology
Rochelle, G., Chen, E., Freeman, S., Van Wagener, D., Xu, Q., & Voice, A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.011 · Cited by 549
Alhashimi, H. A., & Aktas, C. B. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2016.11.016 · Cited by 547
CO2 adsorption in Y and X zeolites modified by alkali metal cation exchange
Walton, K. S., Abney, M. B., & Douglas LeVan, M. (2006) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2005.11.023 · Cited by 537
“Molecular Basket” Sorbents for Separation of CO2 and H2S from Various Gas Streams
Ma, X., Wang, X., & Song, C. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8074105 · Cited by 532
Applications of metal-organic frameworks featuring multi-functional sites
Li, B., Chrzanowski, M., Zhang, Y., & Ma, S. (2016) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2015.05.005 · Cited by 520
Opportunities and challenges in carbon dioxide capture
Spigarelli, B. P., & Kawatra, S. K. (2013) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2013.03.002 · Cited by 512
Active chemisorption sites in functionalized ionic liquids for carbon capture
Cui, G., Wang, J., & Zhang, S. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00462d · Cited by 498
Application of natural zeolites in the purification and separation of gases
Ackley, M. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00353-6 · Cited by 494
Oxyfuel combustion for CO2 capture in power plants
Stanger, R., Wall, T., Spörl, R., Paneru, M., Grathwohl, S., Weidmann, M., Scheffknecht, G., McDonald, D., Myöhänen, K., Ritvanen, J., et al. (2015) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2015.06.010 · Cited by 492
Adsorption of CO2 on Zeolites at Moderate Temperatures
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Losch, J. (2005) · Energy & Fuels · doi:10.1021/ef040059h · Cited by 491
Mangun, C. L., Benak, K. R., Economy, J., & Foster, K. L. (2001) · Carbon · doi:10.1016/s0008-6223(00)00319-5 · Cited by 490
Harlick, P. J. E., & Sayari, A. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060774+ · Cited by 488
Madejski, P., Chmiel, K., Subramanian, N., & Kuś, T. (2022) · Energies · doi:10.3390/en15030887 · Cited by 485
Olabi, A. G., Obaideen, K., Elsaid, K., Wilberforce, T., Sayed, E. T., Maghrabie, H. M., & Abdelkareem, M. A. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111710 · Cited by 484
Songolzadeh, M., Soleimani, M., Takht Ravanchi, M., & Songolzadeh, R. (2014) · The Scientific World Journal · doi:10.1155/2014/828131 · Cited by 478
Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes
Kuramochi, T., Ramírez, A., Turkenburg, W., & Faaij, A. (2012) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.05.001 · Cited by 474
Outlook of carbon capture technology and challenges
Wilberforce, T., Baroutaji, A., Soudan, B., Al-Alami, A. H., & Olabi, A. G. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.11.424 · Cited by 462
Hong, W. Y. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100044 · Cited by 455
A Microporous Metal−Organic Framework for Separation of CO2/N2 and CO2/CH4 by Fixed-Bed Adsorption
Bastin, L., Bárcia, P. S., Hurtado, E. J., Silva, J. A. C., Rodrigues, A. E., & Chen, B. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp077618g · Cited by 442
Kazarian, S. G., Briscoe, B. J., & Welton, T. (2000) · Chemical Communications · doi:10.1039/b005514j · Cited by 432
Process intensification for post-combustion CO2 capture with chemical absorption: A critical review
Wang, M., Joel, A. S., Ramshaw, C., Eimer, D., & Musa, N. M. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.08.083 · Cited by 430
Carbon Capture From Flue Gas and the Atmosphere: A Perspective
Wang, X., & Song, C. (2020) · Frontiers in Energy Research · doi:10.3389/fenrg.2020.560849 · Cited by 428
Comparative Study of CO2 Capture by Carbon Nanotubes, Activated Carbons, and Zeolites
Lu, C., Bai, H., Wu, B., Su, F., & Hwang, J. F. (2008) · Energy & Fuels · doi:10.1021/ef8000086 · Cited by 422
Younas, M., Rezakazemi, M., Daud, M., Wazir, M. B., Ahmad, S., Ullah, N., Inamuddin, & Ramakrishna, S. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2020.100849 · Cited by 421
Membrane-based carbon capture from flue gas: a review
Khalilpour, R., Mumford, K., Zhai, H., Abbas, A., Stevens, G., & Rubin, E. S. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.10.050 · Cited by 417
CO2 capture by adsorption: Materials and process development
Chaffee, A. L., Knowles, G. P., Liang, Z., Zhang, J., Xiao, P., & Webley, P. A. (2007) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00031-x · Cited by 416
Semi-batch absorption and regeneration studies for CO2 capture by aqueous ammonia
Yeh, J. T., Resnik, K. P., Rygle, K., & Pennline, H. W. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.015 · Cited by 408
Utilization of zeolites as CO2 capturing agents: Advances and future perspectives
Kumar, S., Srivastava, R., & Koh, J. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2020.101251 · Cited by 405
New Insights into the Interactions of CO2 with Amine-Functionalized Silica
Serna-Guerrero, R., Da’na, E., & Sayari, A. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie801186g · Cited by 404
Favre, E. (2007) · Journal of Membrane Science · doi:10.1016/j.memsci.2007.02.007 · Cited by 402
Franchi, R. S., Harlick, P. J. E., & Sayari, A. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0504194 · Cited by 400
Formation of a Y-Type Zeolite Membrane on a Porous α-Alumina Tube for Gas Separation
Kusakabe, K., Kuroda, T., Murata, A., & Morooka, S. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie960519x · Cited by 399
Amine-oxide hybrid materials for acid gas separations
Bollini, P., Didas, S. A., & Jones, C. W. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12522b · Cited by 397
Review of pre-combustion capture and ionic liquid in carbon capture and storage
Theo, W. L., Lim, J. S., Hashim, H., Mustaffa, A. A., & Ho, W. S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.103 · Cited by 396
CO2-responsive polymeric materials: synthesis, self-assembly, and functional applications
Darabi, A., Jessop, P. G., & Cunningham, M. F. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00873e · Cited by 391
Nielsen, C. J., Herrmann, H., & Weller, C. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35059a · Cited by 386
Review of post-combustion carbon dioxide capture technologies using activated carbon
Mukherjee, A., Okolie, J. A., Abdelrasoul, A., Niu, C., & Dalai, A. K. (2019) · Journal of Environmental Sciences · doi:10.1016/j.jes.2019.03.014 · Cited by 384
Xu, X., Song, C., Miller, B. G., & Scaroni, A. W. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie050382n · Cited by 379
An Overview of CO2 Mitigation Options for Global Warming-Emphasizing CO2 Sequestration Options
Yamasaki, A. (2003) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.36.361 · Cited by 376
Facile preparation of N-doped activated carbon produced from rice husk for CO2 capture
He, S., Chen, G., Xiao, H., Shi, G., Ruan, C., Ma, Y., Dai, H., Yuan, B., Chen, X., & Yang, X. (2021) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2020.08.021 · Cited by 375
Characterization and application of activated carbon produced by H3PO4 and water vapor activation
Budinova, T., Ekinci, E., Yardim, F., Grimm, A., Björnbom, E., Minkova, V., & Goranova, M. (2006) · Fuel Processing Technology · doi:10.1016/j.fuproc.2006.06.005 · Cited by 366
CO2 adsorption in single-walled carbon nanotubes
Cinke, M., Li, J., Bauschlicher, C. W., Ricca, A., & Meyyappan, M. (2003) · Chemical Physics Letters · doi:10.1016/s0009-2614(03)01124-2 · Cited by 365
CO2 adsorption at nitrogen-doped carbons prepared by K2CO3 activation of urea-modified coconut shell
Yue, L., Xia, Q., Wang, L., Wang, L., DaCosta, H., Yang, J., & Hu, X. (2018) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.09.040 · Cited by 364
CO2 capture adsorbents functionalized by amine – bearing polymers: A review
Varghese, A. M., & Karanikolos, G. N. (2020) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2020.103005 · Cited by 363
Reversible adsorption of carbon dioxide on amine surface-bonded silica gel
Leal, O., Bolívar, C., Ovalles, C., García, J. J., & Espidel, Y. (1995) · Inorganica Chimica Acta · doi:10.1016/0020-1693(95)04534-1 · Cited by 361
Review on CO2 capture by blended amine solutions
Aghel, B., Janati, S., Wongwises, S., & Shadloo, M. S. (2022) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2022.103715 · Cited by 358
An experimental adsorbent screening study for CO2 removal from N2
Harlick, P. J. E., & Tezel, F. H. (2004) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.07.035 · Cited by 355
Fluorous Metal−Organic Frameworks for High-Density Gas Adsorption
Yang, C., Wang, X., & Omary, M. A. (2007) · Journal of the American Chemical Society · doi:10.1021/ja0775265 · Cited by 352
Alternative pathways for efficient CO2 capture by hybrid processes—A review
Song, C., Liu, Q., Ji, N., Deng, S., Zhao, J., Li, Y., Song, Y., & Li, H. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.09.040 · Cited by 349
Abd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104142 · Cited by 346
Amine–Oxide Hybrid Materials for CO2 Capture from Ambient Air
Didas, S. A., Choi, S., Chaikittisilp, W., & Jones, C. W. (2015) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00284 · Cited by 342
The Role of Carbon Capture and Storage in the Energy Transition
Lau, H. C., Ramakrishna, S., Zhang, K., & Radhamani, A. V. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.1c00032 · Cited by 326
Cryogenic CO2 capture using dynamically operated packed beds
Tuinier, M. J., van Sint Annaland, M., Kramer, G. J., & Kuipers, J. A. M. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2009.01.055 · Cited by 319
Ammendola, P., Raganati, F., & Chirone, R. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.037 · Cited by 314
Self-citationValorisation of spent coffee grounds as CO2 adsorbents for postcombustion capture applications
Plaza, M. G., González, A. S., Pevida, C., Pis, J. J., & Rubiera, F. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.05.028 · Cited by 313
Capture of CO2 from flue gas via multiwalled carbon nanotubes
Su, F., Lu, C., Cnen, W., Bai, H., & Hwang, J. F. (2009) · Science of The Total Environment · doi:10.1016/j.scitotenv.2009.01.007 · Cited by 311
A Review of Carbon Nanotube Synthesis via Fluidized-Bed Chemical Vapor Deposition
See, C. H., & Harris, A. T. (2007) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060955b · Cited by 306
Metal‐Organic Frameworks/Graphene‐Based Materials: Preparations and Applications
Zheng, Y., Zheng, S., Xue, H., & Pang, H. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201804950 · Cited by 304
Screening of ionic liquids to capture CO2 by COSMO‐RS and experiments
Zhang, X., Liu, Z., & Wang, W. (2008) · AIChE Journal · doi:10.1002/aic.11573 · Cited by 294
Nonaqueous amine-based absorbents for energy efficient CO2 capture
Guo, H., Li, C., Shi, X., Li, H., & Shen, S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.02.019 · Cited by 294
Synthesis–Structure–Property Relationships for Hyperbranched Aminosilica CO2 Adsorbents
Drese, J. H., Choi, S., Lively, R. P., Koros, W. J., Fauth, D. J., Gray, M. L., & Jones, C. W. (2009) · Advanced Functional Materials · doi:10.1002/adfm.200901461 · Cited by 287
Toward the Development and Deployment of Large-Scale Carbon Dioxide Capture and Conversion Processes
Yuan, Z., Eden, M. R., & Gani, R. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b03277 · Cited by 282
Sustainable biomass-based carbon adsorbents for post-combustion CO2 capture
González, A. S., Plaza, M. G., Rubiera, F., & Pevida, C. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.06.118 · Cited by 280
High-performance CO2 sorbents from algae
Sevilla, M., Falco, C., Titirici, M.-M., & Fuertes, A. B. (2012) · RSC Advances · doi:10.1039/c2ra22552b · Cited by 269
Zhao, B., Liu, F., Cui, Z., Liu, C., Yue, H., Tang, S., Liu, Y., Lu, H., & Liang, B. (2017) · Applied Energy · doi:10.1016/j.apenergy.2016.11.009 · Cited by 266
The Effect of Water on the Adsorption of CO2 and C3H8 on Type X Zeolites
Brandani, F., & Ruthven, D. M. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie040183o · Cited by 264
Chemically modified carbonaceous adsorbents for enhanced CO2 capture: A review
Kamran, U., & Park, S.-J. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.125776 · Cited by 262
Promoting the CO2 adsorption in the amine-containing SBA-15 by hydroxyl group
Yue, M. B., Sun, L. B., Cao, Y., Wang, Z. J., Wang, Y., Yu, Q., & Zhu, J. H. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2007.12.016 · Cited by 261
Reducing the Cost of CO2 Capture from Flue Gases Using Membrane Technology
Ho, M. T., Allinson, G. W., & Wiley, D. E. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie070541y · Cited by 256
Porous graphene oxide frameworks: Synthesis and gas sorption properties
Srinivas, G., Burress, J. W., Ford, J., & Yildirim, T. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11699a · Cited by 243
Review on Reactor Configurations for Adsorption-Based CO 2 Capture
Dhoke, C., Zaabout, A., Cloete, S., & Amini, S. (2021) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04547 · Cited by 240
Cryogenic CO2 capture in natural gas
Hart, A., & Gnanendran, N. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.092 · Cited by 240
Heidari, A., Younesi, H., Rashidi, A., & Ghoreyshi, A. A. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.06.004 · Cited by 237
Monoethanol Amine Modified Zeolite 13X for CO2Adsorption at Different Temperatures
Jadhav, P. D., Chatti, R. V., Biniwale, R. B., Labhsetwar, N. K., Devotta, S., & Rayalu, S. S. (2007) · Energy & Fuels · doi:10.1021/ef070038y · Cited by 236
Kinetics of CO2 adsorption on cherry stone-based carbons in CO2/CH4 separations
Álvarez-Gutiérrez, N., Gil, M. V., Rubiera, F., & Pevida, C. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.08.077 · Cited by 236
Plaza, M. G., González, A. S., Pis, J. J., Rubiera, F., & Pevida, C. (2014) · Applied Energy · doi:10.1016/j.apenergy.2013.09.058 · Cited by 233
Performance of immobilized tertiary amine solid sorbents for the capture of carbon dioxide
Gray, M. L., Champagne, K. J., Fauth, D., Baltrus, J. P., & Pennline, H. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00088-6 · Cited by 231
Purification and upgrading of biogas by pressure swing adsorption on synthetic and natural zeolites
Alonso-Vicario, A., Ochoa-Gómez, J. R., Gil-Río, S., Gómez-Jiménez-Aberasturi, O., Ramírez-López, C. A., Torrecilla-Soria, J., & Domínguez, A. (2010) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2010.05.014 · Cited by 226
CO2 Capture by Temperature Swing Adsorption: Use of Hot CO2-Rich Gas for Regeneration
Ntiamoah, A., Ling, J., Xiao, P., Webley, P. A., & Zhai, Y. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b01384 · Cited by 219
Zanco, S. E., Pérez-Calvo, J.-F., Gasós, A., Cordiano, B., Becattini, V., & Mazzotti, M. (2021) · ACS Engineering Au · doi:10.1021/acsengineeringau.1c00002 · Cited by 219
Development of low-cost biomass-based adsorbents for postcombustion CO2 capture
Plaza, M. G., Pevida, C., Arias, B., Fermoso, J., Casal, M. D., Martín, C. F., Rubiera, F., & Pis, J. J. (2009) · Fuel · doi:10.1016/j.fuel.2009.02.025 · Cited by 216
Current status of CO2 capture with ionic liquids: Development and progress
Faisal Elmobarak, W., Almomani, F., Tawalbeh, M., Al-Othman, A., Martis, R., & Rasool, K. (2023) · Fuel · doi:10.1016/j.fuel.2023.128102 · Cited by 211
Raganati, F., Alfe, M., Gargiulo, V., Chirone, R., & Ammendola, P. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.04.165 · Cited by 209
Self-citationChoi, W.-J., Seo, J.-B., Jang, S.-Y., Jung, J.-H., & Oh, K.-J. (2009) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)62360-8 · Cited by 202
Berger, A. H., & Bhown, A. S. (2011) · Energy Procedia · doi:10.1016/j.egypro.2011.01.089 · Cited by 201
Li, M., & Xiao, R. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2018.12.015 · Cited by 198
Advancement in porous adsorbents for post-combustion CO2 capture
Modak, A., & Jana, S. (2019) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2018.09.018 · Cited by 196
CO2 capture from dry flue gas by means of VPSA, TSA and TVSA
Jiang, N., Shen, Y., Liu, B., Zhang, D., Tang, Z., Li, G., & Fu, B. (2020) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.09.012 · Cited by 195
Wang, L., Sun, F., Hao, F., Qu, Z., Gao, J., Liu, M., Wang, K., Zhao, G., & Qin, Y. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123205 · Cited by 194
Zhao, L., Riensche, E., Blum, L., & Stolten, D. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.02.003 · Cited by 193
Thermodynamics and regeneration studies of CO2 adsorption on multiwalled carbon nanotubes
Hsu, S.-C., Lu, C., Su, F., Zeng, W., & Chen, W. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2009.10.005 · Cited by 190
Wu, X., Wang, M., Liao, P., Shen, J., & Li, Y. (2020) · Applied Energy · doi:10.1016/j.apenergy.2019.113941 · Cited by 190
Carbon Capture Technologies: A Review on Technology Readiness Level
Hekmatmehr, H., Esmaeili, A., Pourmahdi, M., Atashrouz, S., Abedi, A., Ali Abuswer, M., Nedeljkovic, D., Latifi, M., Farag, S., & Mohaddespour, A. (2024) · Fuel · doi:10.1016/j.fuel.2024.130898 · Cited by 189
Sevilla, M., Al-Jumialy, A. S. M., Fuertes, A. B., & Mokaya, R. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10433 · Cited by 189
Thonemann, N., Zacharopoulos, L., Fromme, F., & Nühlen, J. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.130067 · Cited by 188
Post-combustion CO2 capture by aqueous ammonia: A state-of-the-art review
Zhao, B., Su, Y., Tao, W., Li, L., & Peng, Y. (2012) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2012.05.006 · Cited by 187
Pennline, H. W., Luebke, D. R., Jones, K. L., Myers, C. R., Morsi, B. I., Heintz, Y. J., & Ilconich, J. B. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2008.02.002 · Cited by 186
Numerical parametric study on CO2 capture by indirect thermal swing adsorption
Clausse, M., Merel, J., & Meunier, F. (2011) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2011.05.036 · Cited by 185
Surface and interface engineering for organic–inorganic composite membranes
Yang, H.-C., Hou, J., Chen, V., & Xu, Z.-K. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta02844f · Cited by 185
Mahapatra, K., Ramteke, D. S., & Paliwal, L. J. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.01.009 · Cited by 184
Muchan, P., Saiwan, C., Narku-Tetteh, J., et al. (2017) · Chemical Engineering Science · doi:10.1016/j.ces.2017.02.031 · Cited by 184
Liu, M., Xie, K., Nothling, M. D., Gurr, P. A., Tan, S. S. L., Fu, Q., Webley, P. A., & Qiao, G. G. (2018) · ACS Nano · doi:10.1021/acsnano.8b06811 · Cited by 184
Carbon dioxide capture and recovery by means of TSA and/or VSA
Tlili, N., Grévillot, G., & Vallières, C. (2009) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2009.04.005 · Cited by 182
Recent Membrane Developments for CO2 Separation and Capture
Norahim, N., Yaisanga, P., Faungnawakij, K., Charinpanitkul, T., & Klaysom, C. (2018) · Chemical Engineering & Technology · doi:10.1002/ceat.201700406 · Cited by 180
CO2 capture with hybrid absorbents of low viscosity imidazolium-based ionic liquids and amine
Xiao, M., Liu, H., Gao, H., Olson, W., & Liang, Z. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.10.103 · Cited by 179
Hussin, F., & Aroua, M. K. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.119707 · Cited by 174
Enhanced CO2 capture capacity of amine-functionalized MOF-177 metal organic framework
Gaikwad, S., Kim, Y., Gaikwad, R., & Han, S. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.105523 · Cited by 174
Plaza, M. G., Pevida, C., Arias, B., Fermoso, J., Arenillas, A., Rubiera, F., & Pis, J. J. (2008) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-007-8493-x · Cited by 173
Adsorption equilibrium and kinetics for SO2, NO, CO2 on zeolites FAU and LTA
Yi, H., Deng, H., Tang, X., Yu, Q., Zhou, X., & Liu, H. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.11.091 · Cited by 172
A review of CO2 capture by absorption in ionic liquid-based solvents
Babamohammadi, S., Shamiri, A., & Aroua, M. K. (2015) · Reviews in Chemical Engineering · doi:10.1515/revce-2014-0032 · Cited by 171
Adsorption equilibria and kinetics of CO2, CH4 and N2 in natural zeolites
Hernández-Huesca, R., Dı́az, L., & Aguilar-Armenta, G. (1999) · Separation and Purification Technology · doi:10.1016/s1383-5866(98)00094-x · Cited by 167
Characterization of novel geopolymer – Zeolite composites as solid adsorbents for CO2 capture
Minelli, M., Papa, E., Medri, V., Miccio, F., Benito, P., Doghieri, F., & Landi, E. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.02.050 · Cited by 165
Current status and advances in membrane technology for carbon capture
Hou, R., Fong, C., Freeman, B. D., Hill, M. R., & Xie, Z. (2022) · Separation and Purification Technology · doi:10.1016/j.seppur.2022.121863 · Cited by 164
Tuinier, M. J., Hamers, H. P., & van Sint Annaland, M. (2011) · International Journal of Greenhouse Gas Control · doi:10.1016/j.ijggc.2011.08.013 · Cited by 162
Wang, L., Liu, Z., Li, P., Yu, J., & Rodrigues, A. E. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.05.017 · Cited by 161
Efficient CO2 Capture by Porous Carbons Derived from Coconut Shell
Yang, J., Yue, L., Hu, X. D., Wang, L., Zhao, Y., Lin, Y., Sun, Y. J., DaCosta, H. F. M., & Guo, L. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00633 · Cited by 161
Barzagli, F., Giorgi, C., Mani, F., & Peruzzini, M. (2018) · Applied Energy · doi:10.1016/j.apenergy.2018.03.076 · Cited by 160
Xu, J., Wang, Z., Qiao, Z., Wu, H., Dong, S., Zhao, S. J., & Wang, J. (2019) · Journal of Membrane Science · doi:10.1016/j.memsci.2019.03.052 · Cited by 159
Process analysis overview of ionic liquids on CO2 chemical capture
Lemus, J., Moya, C., Santiago, R., & Palomar, J. F. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124509 · Cited by 159
Geopolymers as solid adsorbent for CO2 capture
Minelli, M., Medri, V., Papa, E., Miccio, F., Landi, E., & Doghieri, F. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.04.013 · Cited by 158
Technologies for carbon dioxide capture: A review applied to energy sectors
Vaz, S., Rodrigues de Souza, A. P., & Lobo Baeta, B. E. (2022) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2022.100456 · Cited by 158
The role of the extra-framework cations in the adsorption of CO2 on faujasite Y
Pirngruber, G. D., Raybaud, P., Belmabkhout, Y., Čejka, J., & Zukal, A. (2010) · Physical Chemistry Chemical Physics · doi:10.1039/b927476f · Cited by 156
CO 2 Capture from Cement Plants and Steel Mills Using Membranes
Baker, R. W., Freeman, B. C., Kniep, J., Huang, Y., & Merkel, T. C. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.8b02574 · Cited by 155
Wang, L., Yang, Y., Shen, W., Kong, X., Li, P., Yu, J., & Rodrigues, A. E. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie4009716 · Cited by 154
Exceptional CO 2 working capacity in a heterodiamine-grafted metal–organic framework
Lee, W. R., Jo, H., Yang, L.-M., Lee, H., Ryu, D. W., Lim, K. S., Song, J. H., Min, D. Y., Han, S. S., Seo, J. G., et al. (2015) · Chemical Science · doi:10.1039/c5sc01191d · Cited by 153
Tuinier, M. J., Annaland, M. V. S., & Kuipers, J. A. M. (2011) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2010.11.011 · Cited by 153
Amino acid ionic liquid-based facilitated transport membranes for CO2 separation
Kasahara, S., Kamio, E., Ishigami, T., & Matsuyama, H. (2012) · Chemical Communications · doi:10.1039/c2cc17380h · Cited by 151
Elfving, J., Bajamundi, C., Kauppinen, J., & Sainio, T. (2017) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2017.10.010 · Cited by 148
Thermal Stability of Ionic Liquids for Their Application as New Absorbents
Villanueva, M., Coronas, A., Garcı́a, J., & Salgado, J. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie401656e · Cited by 144
Functionalization of Delaminated Zeolite ITQ-6 for the Adsorption of Carbon Dioxide
Zukal, A., Domínguez, I., Mayerová, J., & Čejka, J. (2009) · Langmuir · doi:10.1021/la901156z · Cited by 143
Xue, B., Yu, Y., Chen, J., Luo, X., & Wang, M. (2016) · International Journal of Coal Science & Technology · doi:10.1007/s40789-016-0149-7 · Cited by 143
A comprehensive review on recent trends in carbon capture, utilization, and storage techniques
Yusuf, M., & Ibrahim, H. (2023) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2023.111393 · Cited by 143
de Riva, J., Suarez-Reyes, J., Moreno, D., Díaz, I., Ferro, V. R., & Palomar, J. F. (2017) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2017.03.019 · Cited by 141
Goren, A. Y., Erdemir, D., & Dinçer, İ. (2023) · Environmental Research · doi:10.1016/j.envres.2023.117503 · Cited by 141
Alkali-bonded ceramics with hierarchical tailored porosity
Landi, E., Medri, V., Papa, E., Dědeček, J., Klein, P., Benito, P., & Vaccari, A. (2012) · Applied Clay Science · doi:10.1016/j.clay.2012.09.027 · Cited by 140
Two-Stage VPSA Process for CO2 Capture from Flue Gas Using Activated Carbon Beads
Shen, C., Liu, Z., Li, P., & Yu, J. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie202097y · Cited by 138
Adsorption separation of carbon dioxide, methane, and nitrogen on Hβ and Na-exchanged β-zeolite
Xu, X. L., Zhao, X., Sun, L., & Liu, X. (2008) · Journal of Natural Gas Chemistry · doi:10.1016/s1003-9953(09)60015-3 · Cited by 138
Amination of Activated Carbon and Adsorption Characteristics of Its Aminated Surface
Abe, M., Kawashima, K., Kozawa, K., Sakai, H., & Kaneko, K. (2000) · Langmuir · doi:10.1021/la990976t · Cited by 137
Lv, B., Yang, K., Xiaobin, Z., Zuoming, Z., & Guohua, J. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114703 · Cited by 137
CO2 capture and mineral storage: State of the art and future challenges
Liu, H., Lu, H., & Hu, H. (2023) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2023.113908 · Cited by 137
Adsorption of carbon dioxide on organically functionalized SBA-16
Wei, J., Shi, J., Pan, H., Zhao, W., Ye, Q., & Shi, Y. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.04.028 · Cited by 135
Liu, S., Ma, R., Hu, X. D., Wang, L., Wang, X., Radosz, M., & Fan, M. (2019) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.9b02127 · Cited by 135
Zhan, X., Lv, B., Yang, K., Jing, G., & Zhou, Z. (2020) · Environmental Science & Technology · doi:10.1021/acs.est.0c00335 · Cited by 134
Nwaoha, C. N., Supap, T., Idem, R. O., Saiwan, C., Tontiwachwuthikul, P. P., Al-Marri, M. J., & Benamor, A. (2016) · Petroleum · doi:10.1016/j.petlm.2016.11.002 · Cited by 132
A Compararitive Review of Next-generation Carbon Capture Technologies for Coal-fired Power Plant
Lockwood, T. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1850 · Cited by 132
Liu, F., Jing, G., Zhou, X., Lv, B., & Zhou, Z. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03717 · Cited by 132
Reducing the energy consumption of membrane-cryogenic hybrid CO2 capture by process optimization
Song, C., Liu, Q., Ji, N., Deng, S., Zhao, J. L., Li, Y., & Kitamura, Y. (2017) · Energy · doi:10.1016/j.energy.2017.02.054 · Cited by 130
Cited by
Hanson, E., Nwakile, C., & Hammed, V. O. (2025) · Results in Surfaces and Interfaces · doi:10.1016/j.rsurfi.2024.100381 · Cited by 308
Kundu, S., Khandaker, T., Anik, M. A.-A. M., Hasan, M. K., Dhar, P. K., Dutta, S. K., Latif, M. A., & Hossain, M. S. (2024) · RSC Advances · doi:10.1039/d4ra04537h · Cited by 181
Joarder, M. S. A., Islam, M. S., Hasan, M. H., Kutub, A., Kabir, M. F., Rashid, F., & Joarder, T. A. (2025) · Environmental Science and Pollution Research · doi:10.1007/s11356-025-36284-9 · Cited by 51
Dini, P., & Paolini, D. (2025) · Batteries · doi:10.3390/batteries11030107 · Cited by 40
Metadata
- Authors
- Raganati, F., & Ammendola, P.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2024-07-15
- Volume
- 38
- Issue
- 15
- Pages
- 13858-13905
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W4400646404
- Cited by
- 296
- References
- 360
- FWCI
- 39.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.