CoChat

Modeling of Carbon Dioxide Adsorption onto Ammonia-Modified Activated Carbon: Kinetic Analysis and Breakthrough Behavior

Shafeeyan, Mohammad Saleh, Daud, Wan Mohd Ashri Wan, Shamiri, Ahmad, Aghamohammadi, Nasrin · 2015 · Energy & Fuels
Cited by 155

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Abstract

The removal of carbon dioxide from the flue gas of fossil-fueled power plants can be achieved using adsorption separation technologies. In this study, the breakthrough adsorption of CO 2 on fixed beds of commercial granular activated carbon (GAC) and ammonia-modified GAC (OXA-GAC) adsorbents was measured. The breakthrough curves were acquired from dynamic column measurements at temperatures ranging from 30 to 60 °C with a feed gas flow rate that varied from 50 to 100 mL min –1 and a total pressure of 1.0 atm. An earlier breakthrough time and lower dynamic adsorption capacity were observed with increasing temperature, increasing feed flow rate, and the use of the GAC adsorbent. The largest CO 2 equilibrium dynamic capacity (0.67 mol kg –1 ) and breakthrough time (10.9 min) over the range of operating conditions investigated were obtained using OXA-GAC adsorbent at 30 °C under a 50 mL min –1 feed flow rate. To predict the breakthrough behavior of the fixed-bed adsorption of CO 2, a simple model based on mass balance was developed. This model consists of an Avrami equation to describe the kinetics of adsorption and a semiempirical Toth equation to represent the gas–solid equilibrium isotherm. The Avrami equation was selected because it provided the best fit with the experimental kinetic curves for both adsorbents, with average relative errors of less than 2% over the temperature range of 30–60 °C. The resultant set of coupled differential equations was solved using a numerical approach based on the finite element method implemented in COMSOL Multiphysics software. The findings showed that the model predictions successfully fit the experimental data over the studied range of feed gas flow rates and adsorption temperatures.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acs.energyfuels.5b00653

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 6 references

Cited by

Metadata

Authors
Shafeeyan, M. S., Daud, W. M. A. W., Shamiri, A., & Aghamohammadi, N.
Venue
Energy & Fuels
Published
2015-09-16
Volume
29
Issue
10
Pages
6565-6577
ISSN
  • 0887-0624 (ISSN-L)
  • 1520-5029
OpenAlex
W2281331986
Cited by
155
References
6
FWCI
11.77
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.