Integrating Torrefaction in the Wood Pellet Industry: A Critical Review
The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Abstract
As an established bioenergy industry, the global wood pellet sector is ideally positioned to adopt biomass torrefaction technologies. In this review, potential benefits and challenges of integrating torrefaction within the pellet industry are reviewed and the required technological interventions to enable this integration are analyzed. It is apparent that integration would accelerate the commercialization of biomass torrefaction and benefit the wood pellet industry, torrefaction developers, as well as coal-based utilities. Torrefied pellets are expected to have distinct applications in power generation and help coal-based utilities to reduce their emission levels and comply with increasingly stringent regulations. Co-firing coal with black pellets requires little-to-no retrofit of the existing power plant and, therefore, can offer a low-cost solution. Two potential pathways, in either an upstream or downstream configuration, for retrofitting torrefaction within a white pellet facility are assessed. A successful upstream integration can potentially produce highly dense and durable torrefied pellets. However, the current limitations with this approach are (a) greater reactor volume required for torrefying wood chips and consequently high capital expenses (CAPEX); (b) difficulty in densification; (c) frequent maintenance requirements due to the abrasive nature of torrefied biomass; and (d) safety concerns from fine generation. Torrefaction as a downstream operation, wherein white pellets are subsequently torrefied to produce black pellets, has the benefit of being a simple bolt-on integration. Downstream integration eliminates the need for additional grinding and pelletizing capacity, while minimizing plant-wide contamination due to dust generated from the processing of torrefied biomass. Furthermore, CAPEX can be reduced, as a typical torrefier has significantly higher throughput when processing pellets compared to wood chips. The limitation of downstream integration includes the potential compromise in pellet quality, especially a loss in strength and density. While the benefits of integrating torrefaction are numerous, the techno-economics for each pathway should be further examined.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Handbook of Biomass Combustion and Co-firing
(2012) · doi:10.4324/9781849773041 · Cited by 1,423
Biomass upgrading by torrefaction for the production of biofuels: A review
van der Stelt, M. J. C., Gerhauser, H., Kiel, J. H. A., & Ptasinski, K. J. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.06.023 · Cited by 1,262
Impact of torrefaction on the grindability and fuel characteristics of forest biomass
Phanphanich, M., & Mani, S. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2010.08.028 · Cited by 892
Self-citationInfluence of torrefaction on the grindability and reactivity of woody biomass
Arias, B., Pevida, C., Fermoso, J., Plaza, M. G., Rubiera, F., & Pis, J. J. (2008) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.09.002 · Cited by 763
Hydrothermal carbonization of lignocellulosic biomass
Xiao, L.-P., Shi, Z.-J., Xu, F., & Sun, R.-C. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2012.05.060 · Cited by 478
Upgrading biomass fuels via wet torrefaction: A review and comparison with dry torrefaction
Bach, Q.-V., & Skreiberg, Ø. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.10.014 · Cited by 431
Kambo, H. S., & Dutta, A. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.08.094 · Cited by 379
An investigation of the grindability of two torrefied energy crops
Bridgeman, T. G., Jones, J. M., Williams, A., & Waldron, D. J. (2010) · Fuel · doi:10.1016/j.fuel.2010.06.043 · Cited by 319
Energy requirement for fine grinding of torrefied wood
Repellin, V., Govin, A., Rolland, M., & Guyonnet, R. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2010.01.039 · Cited by 274
Hydrothermal carbonization (HTC) of selected woody and herbaceous biomass feedstocks
Hoekman, S. K., Broch, A., Robbins, C., Zielinska, B., & Felix, L. (2013) · Biomass Conversion and Biorefinery · doi:10.1007/s13399-012-0066-y · Cited by 246
Cited by
Cahyanti, M. N., Doddapaneni, T. R. K. C., & Kikas, T. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.122737 · Cited by 273
Abdulyekeen, K. A., Umar, A. A., Patah, M. F. A., & Daud, W. M. A. W. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111436 · Cited by 174
Perspectives of Engineered Biochar for Environmental Applications: A Review
Haghighi Mood, S., Pelaez-Samaniego, M. R., & Garcia-Perez, M. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c01201 · Cited by 104
Rashwan, S. S., Adelusi, O., Boulet, M., & Moreau, S. (2025) · Energy Conversion and Management · doi:10.1016/j.enconman.2025.119516 · Cited by 10
Metadata
- Authors
- Kumar, L., Koukoulas, A. A., Mani, S., & Satyavolu, J.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-12-27
- Volume
- 31
- Issue
- 1
- Pages
- 37-54
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2565726175
- Cited by
- 120
- References
- 14
- FWCI
- 3.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Integrating Torrefaction in the Wood Pellet Industry: A Critical Review. https://app.cochat.ai/papers/10.1021/acs.energyfuels.6b02803
- The paper
- Kumar, L., Koukoulas, A. A., Mani, S., & Satyavolu, J. (2017). Integrating Torrefaction in the Wood Pellet Industry: A Critical Review. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.6b02803
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.