Correlation of Feedstock and Bio-oil Compound Distribution
The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Abstract
The correlation of feedstock with bio-oil compound distribution was explored with straw, shell, woody, and algae biomasses. The pyrolysis of 20 typical feedstock samples were performed using Pyrolysis–gas chromatography/mass spectrometry (Py–GC/MS) with a final temperature of 550 °C, heating rate of 10 000 °C/s, and residence time of 10 s. Biomass samples share a common characteristic, such as high oxygen and low nitrogen and sulfur, which is different from coal. The results revealed that there is a strong positive correlation between ketones and cellulose, furans and holocelluose, and phenols and lignin but a negative correlation between short-chain acids and ash content and hydrocarbons and cellulose. Woody biomass produced higher phenols; straw biomass produced high ketones; shell biomass produced high furans; and algae produced high fatty acids. However, some special points showed that Enteromorpha algae produced high furans and tobacco stems produced high N-containing compounds.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, cellulosic-derived biofuels are rich in acids, furans, and ketones, which are similar to those of hemicellulose-derived ones, while lignin-derived biofuels reveal a great capacity to produce phenolic compounds [101].”
From A review on lignin pyrolysis: pyrolytic behavior, mechanism, and relevant upgrading for improving process efficiency (2022) · cites this paper as [101]
Citations
Cites
Characteristics of hemicellulose, cellulose and lignin pyrolysis
Yang, H., Yan, R., Chen, H., Lee, D. H., & Zheng, C. (2007) · Fuel · doi:10.1016/j.fuel.2006.12.013 · Cited by 8,155
Self-citationSynthesis of Transportation Fuels from Biomass: Chemistry, Catalysts, and Engineering
Huber, G. W., Iborra, S., & Corma, A. (2006) · Chemical Reviews · doi:10.1021/cr068360d · Cited by 7,664
Features of promising technologies for pretreatment of lignocellulosic biomass
MOSIER, N. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.06.025 · Cited by 6,251
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Trends in biotechnological production of fuel ethanol from different feedstocks
Sánchez, Ó. J., & Cardona, C. A. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2007.11.013 · Cited by 1,826
A review of catalytic upgrading of bio-oil to engine fuels
Mortensen, P. M., Grunwaldt, J.-D., Jensen, P. A., Knudsen, K. G., & Jensen, A. D. (2011) · Applied Catalysis A: General · doi:10.1016/j.apcata.2011.08.046 · Cited by 1,768
Simple Chemical Transformation of Lignocellulosic Biomass into Furans for Fuels and Chemicals
Binder, J. B., & Raines, R. T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja808537j · Cited by 1,490
Review of biomass pyrolysis oil properties and upgrading research
Zhang, Q., Chang, J., Wang, T., & Xu, Y. (2007) · Energy Conversion and Management · doi:10.1016/j.enconman.2006.05.010 · Cited by 1,472
Bio-oil production and upgrading research: A review
Xiu, S., & Shahbazi, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.028 · Cited by 1,127
Vassilev, S. V., Baxter, D., Andersen, L. K., & Vassileva, C. G. (2013) · Fuel · doi:10.1016/j.fuel.2012.09.041 · Cited by 1,031
The mechanism for thermal decomposition of cellulose and its main products
Shen, D. K., & Gu, S. (2009) · Bioresource Technology · doi:10.1016/j.biortech.2009.06.095 · Cited by 994
Influence of inorganic salts on the primary pyrolysis products of cellulose
Patwardhan, P. R., Satrio, J. A., Brown, R. C., & Shanks, B. H. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.01.112 · Cited by 799
Review of the pyrolysis platform for coproducing bio‐oil and biochar
Laird, D. A., Brown, R. C., Amonette, J. E., & Lehmann, J. (2009) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.169 · Cited by 777
A review on operating parameters for optimum liquid oil yield in biomass pyrolysis
Akhtar, J., & Saidina Amin, N. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.033 · Cited by 692
Carpenter, D., Westover, T. L., Czernik, S., & Jablonski, W. (2014) · Green Chem. · doi:10.1039/c3gc41631c · Cited by 686
The effect of lignin and inorganic species in biomass on pyrolysis oil yields, quality and stability
Fahmi, R., Bridgwater, A. V., Donnison, I., Yates, N., & Jones, J. M. (2008) · Fuel · doi:10.1016/j.fuel.2007.07.026 · Cited by 541
The pyrolytic degradation of wood-derived lignin from pulping process
Shen, D. K., Gu, S., Luo, K. H., Wang, S. R., & Fang, M. X. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.02.078 · Cited by 452
Lu, Q., Yang, X.-C., Dong, C.-Q., Zhang, Z.-F., Zhang, X.-M., & Zhu, X.-F. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.08.006 · Cited by 450
Influence of the interaction of components on the pyrolysis behavior of biomass
Wang, S., Guo, X., Wang, K., & Luo, Z. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.02.006 · Cited by 446
Fast Pyrolysis Bio-Oils from Wood and Agricultural Residues
Oasmaa, A., Solantausta, Y., Arpiainen, V., Kuoppala, E., & Sipilä, K. (2010) · Energy & Fuels · doi:10.1021/ef901107f · Cited by 407
Production and characterization of bio-oil and biochar from rapeseed cake
Özçimen, D., & Karaosmanoğlu, F. (2004) · Renewable Energy · doi:10.1016/j.renene.2003.09.006 · Cited by 390
Chemical Composition of Bio-oils Produced by Fast Pyrolysis of Two Energy Crops
Mullen, C. A., & Boateng, A. A. (2008) · Energy & Fuels · doi:10.1021/ef700776w · Cited by 369
On the mechanism of the rapid pyrolysis of cellulose
Piskorz, J., Radlein, D., & Scott, D. S. (1986) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/0165-2370(86)85003-3 · Cited by 361
Biomass to biofuels, a chemical perspective
Petrus, L., & Noordermeer, M. A. (2006) · Green Chemistry · doi:10.1039/b605036k · Cited by 360
Wang, S., Guo, X., Liang, T., Zhou, Y., & Luo, Z. (2012) · Bioresource Technology · doi:10.1016/j.biortech.2011.10.078 · Cited by 333
The pyrolysis chemistry of a β-O-4 type oligomeric lignin model compound
Chu, S., Subrahmanyam, A. V., & Huber, G. W. (2013) · Green Chem. · doi:10.1039/c2gc36332a · Cited by 331
Mettler, M. S., Mushrif, S. H., Paulsen, A. D., Javadekar, A. D., Vlachos, D. G., & Dauenhauer, P. J. (2012) · Energy Environ. Sci. · doi:10.1039/c1ee02743c · Cited by 322
Pyrolysis of poplar wood sawdust by TG-FTIR and Py–GC/MS
Gu, X., Ma, X., Li, L., Liu, C., Cheng, K., & Li, Z. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.04.009 · Cited by 308
Maddi, B., Viamajala, S., & Varanasi, S. (2011) · Bioresource Technology · doi:10.1016/j.biortech.2011.09.055 · Cited by 280
Wang, Z., McDonald, A. G., Westerhof, R. J. M., Kersten, S. R. A., Cuba-Torres, C. M., Ha, S., Pecha, B., & Garcia-Perez, M. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.11.017 · Cited by 246
Fast pyrolysis of agricultural wastes: Characterization of pyrolysis products
Yanik, J., Kornmayer, C., Saglam, M., & Yüksel, M. (2007) · Fuel Processing Technology · doi:10.1016/j.fuproc.2007.05.002 · Cited by 243
Pyrolysis polygeneration of poplar wood: Effect of heating rate and pyrolysis temperature
Chen, D., Li, Y., Cen, K., Luo, M., Li, H., & Lu, B. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.07.049 · Cited by 240
Structural differences of xylans affect their interaction with cellulose
Kabel, M. A., van den Borne, H., Vincken, J.-P., Voragen, A. G. J., & Schols, H. A. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.09.006 · Cited by 230
Pyrolysis behaviors of four O-acetyl-preserved hemicelluloses isolated from hardwoods and softwoods
Wang, S., Ru, B., Lin, H., & Sun, W. (2015) · Fuel · doi:10.1016/j.fuel.2015.02.045 · Cited by 218
Oily Products from Mosses and Algae via Pyrolysis
Demirbaş, A. (2006) · Energy Sources, Part A: Recovery, Utilization, and Environmental Effects · doi:10.1080/009083190910389 · Cited by 176
Solar, J., de Marco, I., Caballero, B. M., López-Urionabarrenechea, A., Rodriguez, N., Agirre, I., & Adrados, A. (2016) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2016.07.004 · Cited by 171
Pyrolysis of lignin for phenols with alkaline additive
Peng, C., Zhang, G., Yue, J., & Xu, G. (2014) · Fuel Processing Technology · doi:10.1016/j.fuproc.2014.02.025 · Cited by 168
Pyrolytic characteristics of blended coal and woody biomass
Moghtaderi, B., Meesri, C., & Wall, T. F. (2004) · Fuel · doi:10.1016/j.fuel.2003.05.003 · Cited by 165
Ren, S., Lei, H., Wang, L., Bu, Q., Chen, S., Wu, J., Julson, J., & Ruan, R. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2012.06.091 · Cited by 159
Mullen, C. A., Boateng, A. A., Hicks, K. B., Goldberg, N. M., & Moreau, R. A. (2009) · Energy & Fuels · doi:10.1021/ef900912s · Cited by 118
Chen, H., Si, Y., Chen, Y., Yang, H., Chen, D., & Chen, W. (2016) · Fuel · doi:10.1016/j.fuel.2016.09.075 · Cited by 115
Self-citationPyrolytic behavior of waste corn cob
Cao, Q. (2004) · Bioresource Technology · doi:10.1016/j.biortech.2003.10.031 · Cited by 98
García, A., González Alriols, M., & Labidi, J. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2013.12.019 · Cited by 93
Willow biomass as feedstock for an integrated multi-product biorefinery
Krzyżaniak, M., Stolarski, M. J., Waliszewska, B., Szczukowski, S., Tworkowski, J., Załuski, D., & Śnieg, M. (2014) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.04.033 · Cited by 85
Pyrolysis mechanism of β O 4 type lignin model dimer
Chen, L., Ye, X., Luo, F., Shao, J., Lü, Q., Fang, Y., Wang, X., & Chen, H. (2015) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2015.07.009 · Cited by 72
Self-citationChen, H., Lin, G., Chen, Y., Chen, W., & Yang, H. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b02255 · Cited by 68
Self-citationBai, X., Johnston, P. A., & Brown, R. C. (2012) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2012.10.012 · Cited by 67
Selective Production of 4-Vinylphenol by Fast Pyrolysis of Herbaceous Biomass
Qu, Y., Wang, Z., Lü, Q., & Zhang, Y. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie401626d · Cited by 58
Biomass Pyrolytic Polygeneration System: Adaptability for Different Feedstocks
Chen, Y., Yang, H., Wang, X., Chen, W., & Chen, H. (2015) · Energy & Fuels · doi:10.1021/acs.energyfuels.5b02332 · Cited by 50
Self-citationPyrolysis of Oat Straw and the Comparison of the Product Yield to Wheat and Flax Straw Pyrolysis
Mani, T., Murugan, P., & Mahinpey, N. (2011) · Energy & Fuels · doi:10.1021/ef200546v · Cited by 32
Rapid Py-GC/MS assessment of the structural alterations of lignins in genetically modified plants
Rencoret, J., del Río, J. C., Nierop, K. G. J., Gutiérrez, A., & Ralph, J. (2016) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2016.07.016 · Cited by 31
Cited by
Advances in thermochemical conversion of woody biomass to energy, fuels and chemicals
Pang, S. (2019) · Biotechnology Advances · doi:10.1016/j.biotechadv.2018.11.004 · Cited by 402
Lu, X., & Gu, X. (2022) · Biotechnology for Biofuels and Bioproducts · doi:10.1186/s13068-022-02203-0 · Cited by 354
“For example, cellulosic-derived biofuels are rich in acids, furans, and ketones, which are similar to those of hemicellulose-derived ones, while lignin-derived biofuels reveal a great capacity to produce phenolic compounds [101].”
BackgroundChen, X., Chen, Y., Yang, H., Wang, X., Che, Q., Chen, W., & Chen, H. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2018.11.008 · Cited by 223
Self-citationChe, Q., Yang, M., Wang, X., Yang, Q., Rose Williams, L., Yang, H., Zou, J., Zeng, K., Zhu, Y., Chen, Y., et al. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.01.081 · Cited by 193
Self-citationUllah, Z., khan, M., Raza Naqvi, S., Farooq, W., Yang, H., Wang, S., & Vo, D.-V. N. (2021) · Bioresource Technology · doi:10.1016/j.biortech.2021.125292 · Cited by 171
Self-citation
Metadata
- Authors
- Li, J., Chen, Y., Yang, H., Zhu, D., Chen, X., Wang, X., & Chen, H.
- Affiliations
- State Key Laboratory of Coal Combustion (CN)
- Corresponding author
- Chen, Yingquan
- Yang, Haiping
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-06-12
- Volume
- 31
- Issue
- 7
- Pages
- 7093-7100
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2620549649
- Cited by
- 63
- References
- 52
- Citations by year
- 2026: 2 · 2025: 2 · 2024: 7 · 2023: 5 · 2022: 7 · 2021: 12 · 2020: 7 · 2019: 10 · 2018: 10 · 2017: 1
- FWCI
- 3.45
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Energy & Fuels (publishedVersion)
- Funders
- Ministry of Education of the People's Republic of China
- Ministry of Science and Technology of the People's Republic of China (2013CB228102)
- Ministry of Agriculture of the People's Republic of China (201303095)
- National Natural Science Foundation of China (51406061, 51622604)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Energy › Fuel Technology › Biodiesel Production and Applications
- Physical Sciences › Chemical Engineering › Fluid Flow and Transfer Processes › Advanced Combustion Engine Technologies
- Keywords
- biomass pyrolysis, bio-oil composition, feedstock characterization, ketones, furan, phenols, lignin, cellulose, woody biomass, straw biomass, algal biomass, Enteromorpha, tobacco stems, N-containing compounds, ash content
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.