Hydrothermal Liquefaction of Lignocellulosic Biomass Using Potassium Fluoride-Doped Alumina
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Hydrothermal liquefaction (HTL) of spruce wood was performed without and with the use of a potassium fluoride-doped alumina catalyst (KF/Al 2 O 3 ) in a bench-top reactor. HTL runs were performed at 250, 300, and 350 °C with residence times of 15, 30, and 60 min. The effects of the catalyst at different catalyst loadings (in concentrations from 10 to 40 wt % of the lignocellulosic biomass) on the bio-oil and solid residue yields as well as their properties were investigated. The use of the catalyst increased the bio-oil yields over twofold and reduced char yields. Gas chromatography–mass spectrometry analysis revealed that the bio-oil from the noncatalytic and catalytic runs consisted of aldehydes, ketones, phenols, acids, and esters. Among these components, phenolic compounds were dominant in both the noncatalytic and catalytic runs. The relative yields of phenolic compounds increased with catalyst use. The highest heating value was estimated to be approximately 29 MJ/kg. The boiling point distributions of the bio-oils from both runs revealed that the total naphtha fraction (light and heavy) was comparable to that of crude oil.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of hydrothermal biomass processing
Tekin, K., Karagöz, S., & Bektaş, S. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.07.216 · Cited by 730
Self-citationCao, L., Zhang, C., Chen, H., Tsang, D. C. W., Luo, G., Zhang, S., & Chen, J. (2017) · Bioresource Technology · doi:10.1016/j.biortech.2017.08.196 · Cited by 310
Cited by
Sustainable energy and fuels from biomass: a review focusing on hydrothermal biomass processing
Alper, K., Tekin, K., Karagöz, S., & Ragauskas, A. J. (2020) · Sustainable Energy & Fuels · doi:10.1039/d0se00784f · Cited by 335
Self-citationNext-generation biofuels and platform biochemicals from lignocellulosic biomass
Okolie, J. A., Mukherjee, A., Nanda, S., Dalai, A. K., & Kozinski, J. A. (2021) · International Journal of Energy Research · doi:10.1002/er.6697 · Cited by 184
Hydrothermal liquefaction and gasification of biomass and model compounds: a review
Yang, C., Wang, S., Yang, J., Xu, D., Li, Y., Li, J., & Zhang, Y. (2020) · Green Chemistry · doi:10.1039/d0gc02802a · Cited by 167
Wet organic waste treatment via hydrothermal processing: A critical review
Marzbali, M. H., Kundu, S., Halder, P., Patel, S., Hakeem, I. G., Paz-Ferreiro, J., Madapusi, S., Surapaneni, A., & Shah, K. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.130557 · Cited by 147
Metadata
- Authors
- Alper, K., Tekin, K., & Karagöz, S.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-03-05
- Volume
- 33
- Issue
- 4
- Pages
- 3248-3256
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2918831317
- Cited by
- 57
- References
- 2
- FWCI
- 2.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hydrothermal Liquefaction of Lignocellulosic Biomass Using Potassium Fluoride-Doped Alumina. https://app.cochat.ai/papers/10.1021/acs.energyfuels.8b04381
- The paper
- Alper, K., Tekin, K., & Karagöz, S. (2019). Hydrothermal Liquefaction of Lignocellulosic Biomass Using Potassium Fluoride-Doped Alumina. Energy & Fuels. https://doi.org/10.1021/acs.energyfuels.8b04381
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.