Catalytic Co-pyrolysis of Biomass and Plastics (Polypropylene and Polystyrene) Using Spent FCC Catalyst
The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
In situ catalytic co-pyrolysis (CCP) of mixtures of lignocellulosic biomass (LB) and plastic (polypropylene (PP) and polystyrene (PS)) with spent FCC catalyst (10% w/w loading) was performed in a semibatch reactor. The experiments were carried out using 30 g of feed at 510 °C and three different feed ratios of LB to plastic (1:2, 1:1, and 2:1). The effect of feed ratio on bio-oil yield, composition, and carbon yield of products (mainly, aromatics and olefins) was evaluated. A maximum aromatic selectivity of ∼49%C with PP and ∼82%C with PS was observed at a feed ratio of 0.5. Co-processing LB with PP produced more valuable chemicals like toluene and xylene at equal mixing ratios. The total yield of monoaromatics and olefins was maximum (∼73%C) at an LB to PP ratio of 0.5. When LB was co-fed with PS, the more valuable styrene monomers and ethylbenzene were found significantly in the product at intermediate mixing ratios. While co-feeding PP with LB improved the (H/C) eff ratio of the pyrolysis liquid, the change in the (H/C) eff ratio was insignificant in the case of biomass and PS mixtures. The spent FCC catalyst helps in oxygen removal from the bio-oil and improves its quality (higher aromatic fraction) compared to oil obtained from thermal co-pyrolysis of the biomass and plastic mixtures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Catalytic conversion of biomass to biofuels
Alonso, D. M., Bond, J. Q., & Dumesic, J. A. (2010) · Green Chemistry · doi:10.1039/c004654j · Cited by 2,333
Mechanism study of wood lignin pyrolysis by using TG–FTIR analysis
Liu, Q., Wang, S., Zheng, Y., Luo, Z., & Cen, K. (2008) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2008.03.007 · Cited by 965
Gas- and solid/liquid-phase reactions during pyrolysis of softwood and hardwood lignins
Asmadi, M., Kawamoto, H., & Saka, S. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.08.003 · Cited by 169
Zhang, H., Xiao, R., Nie, J., Jin, B., Shao, S., & Xiao, G. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2015.05.040 · Cited by 158
Cited by
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Pyrolysis technology for plastic waste recycling: A state-of-the-art review
Dai, L., Zhou, N., Lv, Y., Cheng, Y., Wang, Y., Liu, Y., Cobb, K., Chen, P., Lei, H., & Ruan, R. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101021 · Cited by 485
Catalytic methods for chemical recycling or upcycling of commercial polymers
Kosloski-Oh, S. C., Wood, Z. A., Manjarrez, Y., de los Rios, J. P., & Fieser, M. E. (2021) · Materials Horizons · doi:10.1039/d0mh01286f · Cited by 369
Huang, J., Veksha, A., Chan, W. P., Giannis, A., & Lisak, G. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111866 · Cited by 301
Catalytic co-pyrolysis of biomass and waste plastics as a route to upgraded bio-oil
Dyer, A. C., Nahil, M. A., & Williams, P. T. (2021) · Journal of the Energy Institute · doi:10.1016/j.joei.2021.03.022 · Cited by 159
Metadata
- Authors
- Praveen Kumar, K., & Srinivas, S.
- Venue
- Energy & Fuels
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-12-10
- Volume
- 34
- Issue
- 1
- Pages
- 460-473
- ISSN
- 0887-0624 (ISSN-L)
- 1520-5029
- OpenAlex
- W2996335973
- Cited by
- 117
- References
- 6
- FWCI
- 4.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.