The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Detailed Analysis of the Composition of Selected Plastic Packaging Waste Products and Its Implications for Mechanical and Thermochemical Recycling
Open accessAbstract
Plastic packaging typically consists of a mixture of polymers and contains a whole range of components, such as paper, organic residue, halogens, and metals, which pose problems during recycling. Nevertheless, until today, limited detailed data are available on the full polymer composition of plastic packaging waste taking into account the separable packaging parts present in a certain waste stream, nor on their quantitative levels of (elemental) impurities. This paper therefore presents an unprecedented in-depth analysis of the polymer and elemental composition, including C, H, N, S, O, metals, and halogens, of commonly generated plastic packaging waste streams in European sorting facilities. Various analytical techniques are applied, including Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), polarized optical microscopy, ion chromatography, and inductively coupled plasma optical emission spectrometry (ICP-OES), on more than 100 different plastic packaging products, which are all separated into their different packaging subcomponents (e.g., a bottle into the bottle itself, the cap, and the label). Our results show that certain waste streams consist of mixtures of up to nine different polymers and contain various elements of the periodic table, in particular metals such as Ca, Al, Na, Zn, and Fe and halogens like Cl and F, occurring in concentrations between 1 and 3000 ppm. As discussed in the paper, both polymer and elemental impurities impede in many cases closed-loop recycling and require advanced pretreatment steps, increasing the overall recycling cost.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
River plastic emissions to the world’s oceans
Lebreton, L. C. M., van der Zwet, J., Damsteeg, J.-W., Slat, B., Andrady, A., & Reisser, J. (2017) · Nature Communications · doi:10.1038/ncomms15611 · Cited by 4,011
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Self-citationFuture Scenarios of Global Plastic Waste Generation and Disposal
Lebreton, L., & Andrady, A. (2019) · Palgrave Communications · doi:10.1057/s41599-018-0212-7 · Cited by 2,327
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Chemical recycling of waste plastics for new materials production
Rahimi, A., & García, J. M. (2017) · Nature Reviews Chemistry · doi:10.1038/s41570-017-0046 · Cited by 2,121
The future of plastics recycling
Garcia, J. M., & Robertson, M. L. (2017) · Science · doi:10.1126/science.aaq0324 · Cited by 1,346
Strategies to reduce the global carbon footprint of plastics
Zheng, J., & Suh, S. (2019) · Nature Climate Change · doi:10.1038/s41558-019-0459-z · Cited by 1,252
(2003) · Springer eBooks · doi:10.1007/0-306-48244-4 · Cited by 1,093
A review on co-pyrolysis of biomass: An optional technique to obtain a high-grade pyrolysis oil
Abnisa, F., & Wan Daud, W. M. A. (2014) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.07.007 · Cited by 903
Recycling of Polymer-Based Multilayer Packaging: A Review
Kaiser, K., Schmid, M., & Schlummer, M. (2017) · Recycling · doi:10.3390/recycling3010001 · Cited by 549
Plastic flexible films waste management – A state of art review
Horodytska, O., Valdés, F. J., & Fullana, A. (2018) · Waste Management · doi:10.1016/j.wasman.2018.04.023 · Cited by 520
Serrano, D. P., Aguado, J., & Escola, J. M. (2012) · ACS Catalysis · doi:10.1021/cs3003403 · Cited by 457
(2014) · Springer eBooks · doi:10.1007/978-94-007-6064-6 · Cited by 423
Performance indicators for a circular economy: A case study on post-industrial plastic waste
Huysman, S., De Schaepmeester, J., Ragaert, K., Dewulf, J., & De Meester, S. (2017) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2017.01.013 · Cited by 421
Self-citationRecycling potential of post-consumer plastic packaging waste in Finland
Dahlbo, H., Poliakova, V., Mylläri, V., Sahimaa, O., & Anderson, R. (2018) · Waste Management · doi:10.1016/j.wasman.2017.10.033 · Cited by 364
Fast pyrolysis of biomass and waste plastic in a fluidized bed reactor
Xue, Y., Zhou, S., Brown, R. C., Kelkar, A., & Bai, X. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.033 · Cited by 348
Plastics recycling and waste management in the US
Subramanian, P. M. (2000) · Resources, Conservation and Recycling · doi:10.1016/s0921-3449(99)00049-x · Cited by 312
Hahladakis, J. N., & Iacovidou, E. (2019) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.120887 · Cited by 307
Challenges and opportunities of solvent-based additive extraction methods for plastic recycling
Ügdüler, S., Van Geem, K. M., Roosen, M., Delbeke, E. I. P., & De Meester, S. (2020) · Waste Management · doi:10.1016/j.wasman.2020.01.003 · Cited by 290
Self-citationJang, Y.-C., Lee, G., Kwon, Y., Lim, J.-H., & Jeong, J.-H. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2020.104798 · Cited by 247
Thermal degradation of municipal plastic waste for production of fuel-like hydrocarbons
Miskolczi, N., Bartha, L., Deák, G., & Jóver, B. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.04.025 · Cited by 219
Motivating actions to mitigate plastic pollution
Jia, L., Evans, S., & Linden, S. V. D. (2019) · Nature Communications · doi:10.1038/s41467-019-12666-9 · Cited by 208
Brouwer, M. T., Thoden van Velzen, E. U., Augustinus, A., Soethoudt, H., De Meester, S., & Ragaert, K. (2018) · Waste Management · doi:10.1016/j.wasman.2017.10.034 · Cited by 206
Self-citationContamination in plastic recycling: influence of metals on the quality of reprocessed plastic
Eriksen, M. K., Pivnenko, K., Olsson, M. E., & Astrup, T. F. (2018) · Waste Management · doi:10.1016/j.wasman.2018.08.007 · Cited by 201
Tar removal from biomass pyrolysis gas in two-step function of decomposition and adsorption
Phuphuakrat, T., Namioka, T., & Yoshikawa, K. (2009) · Applied Energy · doi:10.1016/j.apenergy.2009.12.002 · Cited by 197
Recycling of plastics in Germany
Patel, M. K., von Thienen, N., Jochem, E., & Worrell, E. (2000) · Resources Conservation and Recycling · doi:10.1016/s0921-3449(99)00058-0 · Cited by 130
Eriksen, M. K., & Astrup, T. F. (2019) · Waste Management · doi:10.1016/j.wasman.2019.02.006 · Cited by 124
Brouwer, M. T., Picuno, C., van Velzen, E. U. T., Kuchta, K., Meester, S. D., & Ragaert, K. (2019) · Waste Management · doi:10.1016/j.wasman.2019.09.012 · Cited by 122
Self-citationGeneral Characteristics of Packaging Materials for Food System
Kim, Y. T., Min, B., & Kim, K. W. (2013) · Elsevier eBooks · doi:10.1016/b978-0-12-394601-0.00002-3 · Cited by 111
Huysveld, S., Hubo, S., Ragaert, K., & Dewulf, J. P. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.11.110 · Cited by 111
Self-citationRecovering waste plastics using shape-selective nano-scale reactors as catalysts
Zhang, Z., Góra‐Marek, K., Watson, J. S., Tian, J., Ryder, M. R., Tarach, K. A., López-Pérez, L., Martı́nez-Triguero, J., & Melián-Cabrera, I. V. (2018) · Nature Sustainability · doi:10.1038/s41893-018-0195-9 · Cited by 98
Gala, A., Guerrero, M., & Serra, J. M. (2020) · Waste Management · doi:10.1016/j.wasman.2020.05.019 · Cited by 92
Belle, A. V., Demets, R., Mys, N., Kets, K. V., Dewulf, J. P., Geem, K. M. V., Meester, S. D., & Ragaert, K. (2020) · Polymers · doi:10.3390/polym12051171 · Cited by 83
Self-citationGötze, R., Pivnenko, K., Boldrin, A., Scheutz, C., & Astrup, T. F. (2016) · Waste Management · doi:10.1016/j.wasman.2016.05.009 · Cited by 55
Wang, X., Jin, Q., Zhang, J., Li, Y., Li, S., Mikulčić, H., Vujanović, M., Tan, H., & Duić, N. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.02.082 · Cited by 53
Trubetskaya, A., Brown, A., Tompsett, G. A., Timko, M. T., Kling, J., Broström, M., Andersen, M. L., & Umeki, K. (2018) · Applied Energy · doi:10.1016/j.apenergy.2017.12.068 · Cited by 45
Hubo, S., Delva, L., Damme, N. V., & Ragaert, K. (2016) · AIP conference proceedings · doi:10.1063/1.4965586 · Cited by 43
Self-citationProduction of bio-ethene and propene: alternatives for bulk chemicals and polymers
Dijkmans, T., Pyl, S. P., Reyniers, M., Abhari, R., Geem, K. M. V., & Marin, G. B. (2013) · Green Chemistry · doi:10.1039/c3gc41097h · Cited by 42
Foschi, E., D’Addato, F., & Bònoli, A. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-08155-y · Cited by 42
van Bruggen, E. P. A., Koster, R., Picken, S. J., & Ragaert, K. (2016) · International Polymer Processing · doi:10.3139/217.3124 · Cited by 41
Self-citationGarcia, P. S., Scuracchio, C. H., & Cruz, S. A. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.08.002 · Cited by 40
Techno-economic analysis of an absorption based methanol to olefins recovery section
Reyniers, P. A., Vandewalle, L. A., Saerens, S., de Smedt, P., Marin, G. B., & Geem, K. M. V. (2016) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2016.12.124 · Cited by 27
Cited by
Managing Plastic Waste─Sorting, Recycling, Disposal, and Product Redesign
Lange, J.-P. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c05013 · Cited by 637
Uekert, T., Singh, A., DesVeaux, J. S., Ghosh, T., Bhatt, A., Yadav, G., Afzal, S., Walzberg, J., Knauer, K. M., Nicholson, S. R., et al. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.2c05497 · Cited by 428
Depolymerization within a Circular Plastics System
Clark, R. A., & Shaver, M. P. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00739 · Cited by 408
Why is recycling of postconsumer plastics so challenging?
Vogt, B. D., Stokes, K. K., & Kumar, S. K. (2021) · ACS Applied Polymer Materials · doi:10.1021/acsapm.1c00648 · Cited by 385
Kusenberg, M., Eschenbacher, A., Djokic, M. R., Zayoud, A., Ragaert, K., De Meester, S., & Van Geem, K. M. (2022) · Waste Management · doi:10.1016/j.wasman.2021.11.009 · Cited by 319
Self-citation
Metadata
- Authors
- Roosen, M., Mys, N., Kusenberg, M., Billen, P., Dumoulin, A., Dewulf, J., Van Geem, K. M., Ragaert, K., & De Meester, S.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-09-28
- Volume
- 54
- Issue
- 20
- Pages
- 13282-13293
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W3088212236
- Cited by
- 337
- References
- 42
- FWCI
- 7.32
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.