The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Challenges and opportunities of solvent-based additive extraction methods for plastic recycling
Abstract
Additives are ubiquitously used in plastics to improve their functionality. However, they are not always desirable in their 'second life' and are a major bottleneck for chemical recycling. Although research on extraction techniques for efficient removal of additives is increasing, it resembles much like uncharted territory due to the broad variety of additives, plastics and removal techniques. Today solvent-based additive extraction techniques, solid-liquid extraction and dissolution-precipitation, are considered to be the most promising techniques to remove additives. This review focuses on the assessment of these techniques by making a link between literature and physicochemical principles such as diffusion and Hansen solubility theory. From a technical point of view, dissolution-precipitation is preferred to remove a broad spectrum of additives because diffusion limitations affect the solid-liquid extraction recoveries. Novel techniques such as accelerated solvent extraction (ASE) are promising for finding the balance between these two processes. Because of limited studies on the economic and environmental feasibility of extraction methods, this review also includes a basic economic and environmental assessment of two extreme cases for the extraction of additives. According to this assessment, the feasibility of additives removal depends strongly on the type of additive and plastic and also on the extraction conditions. In the best-case scenario at least 70% of solvent recovery is required to extract plasticizers from polyvinyl chloride (PVC) via dissolution-precipitation with tetrahydrofuran (THF), while solid-liquid extraction of phenolic antioxidants and a fatty acid amide slip agents from polypropylene (PP) with dichloromethane (DCM) can be economically viable even without intensive solvent recovery.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Ultrasound: A clean, green extraction technology
Tiwari, B. K. (2015) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2015.04.013 · Cited by 1,042
Vinatoru, M., Mason, T. J., & Calinescu, I. (2017) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2017.09.002 · Cited by 710
CHAPTER 4. Microwave‐assisted Extraction
Destandau, E., Michel, T., & Elfakir, C. (2013) · Green Chemistry Series · doi:10.1039/9781849737579-00113 · Cited by 68
Cited by
Critical advances and future opportunities in upcycling commodity polymers
Jehanno, C., Alty, J. W., Roosen, M., De Meester, S., Dove, A. P., Chen, E. Y.-X., Leibfarth, F. A., & Sardon, H. (2022) · Nature · doi:10.1038/s41586-021-04350-0 · Cited by 1,325
Self-citationChemical and biological catalysis for plastics recycling and upcycling
Ellis, L. D., Rorrer, N. A., Sullivan, K. P., Otto, M., McGeehan, J. E., Román-Leshkov, Y., Wierckx, N., & Beckham, G. T. (2021) · Nature Catalysis · doi:10.1038/s41929-021-00648-4 · Cited by 1,201
Managing Plastic Waste─Sorting, Recycling, Disposal, and Product Redesign
Lange, J.-P. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c05013 · Cited by 637
Expanding plastics recycling technologies: chemical aspects, technology status and challenges
Li, H., Aguirre-Villegas, H. A., Allen, R. D., Bai, X., Benson, C. H., Beckham, G. T., Bradshaw, S. L., Brown, J. L., Brown, R. C., Cecon, V. S., et al. (2022) · Green Chemistry · doi:10.1039/d2gc02588d · Cited by 616
Catalytic processing of plastic waste on the rise
Martín, A. J., Mondelli, C., Jaydev, S. D., & Pérez-Ramírez, J. (2021) · Chem · doi:10.1016/j.chempr.2020.12.006 · Cited by 613
Metadata
- Authors
- Ügdüler, S., Van Geem, K. M., Roosen, M., Delbeke, E. I. P., & De Meester, S.
- Venue
- Waste Management
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 104
- Pages
- 148-182
- ISSN
- 0956-053X (ISSN-L)
- OpenAlex
- W3000785959
- Cited by
- 290
- References
- 5
- FWCI
- 11.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Challenges and opportunities of solvent-based additive extraction methods for plastic recycling. https://app.cochat.ai/papers/10.1016/j.wasman.2020.01.003
- The paper
- Ügdüler, S., Van Geem, K. M., Roosen, M., Delbeke, E. I. P., & De Meester, S. (2020). Challenges and opportunities of solvent-based additive extraction methods for plastic recycling. Waste Management. https://doi.org/10.1016/j.wasman.2020.01.003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.