Dynamic Material Flow Analysis of PET, PE, and PP Flows in Europe: Evaluation of the Potential for Circular Economy
Open accessThe DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
This study evaluates the potential circularity of PET, PE, and PP flows in Europe based on dynamic material flow analysis (MFA), considering product lifetimes, demand growth rates, and quality reductions of recycled plastic (downcycling). The circularity was evaluated on a baseline scenario, representing 2016 conditions, and on prospective scenarios representing key circularity enhancing initiatives, including (i) maintaining constant plastic consumption, (ii) managing waste plastic exports in the EU, (iii) design-for-recycling initiatives, (iv) improved collection, and (v) improved recovery and reprocessing. Low recycling rates ( RR, 13–20%) and dependence on virgin plastic, representing 85–90% of the annual plastic demand, were demonstrated after 50 years in the baseline. Limited improvements were related to the individual scenarios, insufficient to meet existing recycling targets. However, by combining initiatives, RRs above 55%, where 75–90% was recycled in a closed loop, were demonstrated. Moreover, 40–65% of the annual demand could potentially be covered by recycled plastic. Maintaining a constant plastic demand over time was crucial in order to reduce the absolute dependence on virgin plastic, which was not reflected by the RR . Thus, focusing strictly on RRs and even whether and to which extent virgin material is substituted, is insufficient for evaluating the transition toward circularity, which cannot be achieved by technology improvements alone—the demand must also be stabilized.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Mapping Global Flows of Chemicals: From Fossil Fuel Feedstocks to Chemical Products
Levi, P. G., & Cullen, J. M. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b04573 · Cited by 392
Plastic waste from recycling centres: characterisation and evaluation of plastic recyclability
Faraca, G., & Astrup, T. (2019) · Waste Management · doi:10.1016/j.wasman.2019.06.038 · Cited by 370
Self-citationPerugini, F., Mastellone, M. L., & Arena, U. (2005) · Environmental Progress · doi:10.1002/ep.10078 · Cited by 347
EFSA Panel on food contact materials, E. (2011) · EFSA Journal · doi:10.2903/j.efsa.2011.2184 · Cited by 334
Eriksen, M. K., Christiansen, J. D., Daugaard, A. E., & Astrup, T. F. (2019) · Waste Management · doi:10.1016/j.wasman.2019.07.005 · Cited by 329
Self-citationCommon Misconceptions about Recycling
Geyer, R., Kuczenski, B., Zink, T., & Henderson, A. (2016) · Journal of Industrial Ecology · doi:10.1111/jiec.12355 · Cited by 299
Plastic waste as a fuel - CO2-neutral or not?
Eriksson, O., & Finnveden, G. (2009) · Energy & Environmental Science · doi:10.1039/b908135f · Cited by 272
Circular economy of plastic packaging: Current practice and perspectives in Austria
Van Eygen, E., Laner, D., & Fellner, J. (2018) · Waste Management · doi:10.1016/j.wasman.2017.11.040 · Cited by 262
Handbook of Material Flow Analysis
Brunner, P. H., & Rechberger, H. (2016) · doi:10.1201/9781315313450 · Cited by 236
Probabilistic Material Flow Analysis of Seven Commodity Plastics in Europe
Kawecki, D., Scheeder, P. R. W., & Nowack, B. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.8b01513 · Cited by 232
Quality Assessment and Circularity Potential of Recovery Systems for Household Plastic Waste
Eriksen, M. K., Damgaard, A., Boldrin, A., & Astrup, T. F. (2019) · Journal of Industrial Ecology · doi:10.1111/jiec.12822 · Cited by 211
Self-citationBrouwer, M. T., Thoden van Velzen, E. U., Augustinus, A., Soethoudt, H., De Meester, S., & Ragaert, K. (2018) · Waste Management · doi:10.1016/j.wasman.2017.10.034 · Cited by 206
Vadenbo, C., Hellweg, S., & Astrup, T. F. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12519 · Cited by 189
Self-citationStocks and flows of polyvinyl chloride (PVC) in China: 1980-2050
Liu, Y., Zhou, C., Li, F., Liu, H., & Yang, J. (2020) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2019.104584 · Cited by 187
Huysman, S., Debaveye, S., Schaubroeck, T., Meester, S. D., Ardente, F., Mathieux, F., & Dewulf, J. (2015) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2015.05.014 · Cited by 164
The European PVC cycle: In-use stock and flows
Ciacci, L., Passarini, F., & Vassura, I. (2016) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2016.08.008 · Cited by 148
Eriksen, M. K., & Astrup, T. F. (2019) · Waste Management · doi:10.1016/j.wasman.2019.02.006 · Cited by 124
Self-citationEuropean Commission – 7th Framework Programme
Fiorini, G. L., & Vasile, A.-C. (2011) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2011.01.052 · Cited by 121
Present Potentials and Limitations of a Circular Economy with Respect to Primary Raw Material Demand
Fellner, J., Lederer, J., Scharff, C., & Laner, D. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12582 · Cited by 100
Is there an environmentally optimal separate collection rate?
Haupt, M., Waser, E., Würmli, J. C., & Hellweg, S. (2018) · Waste Management · doi:10.1016/j.wasman.2018.03.050 · Cited by 59
Modelling of PET Quality Parameters for a Closed‐Loop Recycling System for Food Contact
Rieckmann, T., Frei, F., & Völker, S. (2011) · Macromolecular Symposia · doi:10.1002/masy.201000069 · Cited by 15
Recycling of Food Packaging Materials
Kozlowski, M. A. (2015) · doi:10.1002/9781119109785.ch11 · Cited by 4
Research works printed but not linked: 6
- European Plastic Industry, 2018, The European Plastics Industry Circular Economy Voluntary Commitments towards 50% Plastics Waste Recycling
- World Economic Forum, 2016, The New Plastics Economy-Rethinking the Future of Plastics
- PlasticsEurope Market Research Group (PEMRG)/Consultic Marketing & Industrieberatung GmbH, 2017, Plastics—the Facts 2017, 16
- EC, 2008, Off. J. Eur. Communities, 86, 9
- PlasticsEurope, 2017, Plastics—the Facts 2017: Analysis of European Plastics Production, Demand and Waste Data
- European Union, 2019, Environmental Impact Assessments of Innovative Bio-Based Product
Cited by
Complexities of the global plastics supply chain revealed in a trade-linked material flow analysis
Houssini, K., Li, J., & Tan, Q. (2025) · Communications Earth & Environment · doi:10.1038/s43247-025-02169-5 · Cited by 363
Antonopoulos, I., Faraca, G., & Tonini, D. (2021) · Waste Management · doi:10.1016/j.wasman.2021.04.002 · Cited by 301
Self-citationA review of the plastic value chain from a circular economy perspective
Johansen, M. R., Christensen, T. B., Ramos, T. M., & Syberg, K. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.113975 · Cited by 279
Microplastics remediation in aqueous systems: Strategies and technologies
Hu, K., Tian, W., Yang, Y., Nie, G., Zhou, P., Wang, Y., Duan, X., & Wang, S. (2021) · Water Research · doi:10.1016/j.watres.2021.117144 · Cited by 204
Linear, Graft, and Beyond: Multiblock Copolymers as Next-Generation Compatibilizers
Self, J. L., Zervoudakis, A. J., Peng, X., Lenart, W. R., Macosko, C. W., & Ellison, C. J. (2022) · JACS Au · doi:10.1021/jacsau.1c00500 · Cited by 194
Metadata
- Authors
- Eriksen, M. K., Pivnenko, K., Faraca, G., Boldrin, A., & Astrup, T. F.
- Affiliations
- Technical University of Denmark (DK)
- European Commission (BE)
- Corresponding author
- Eriksen, Marie Kampmann
- ORCID
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-11-23
- Volume
- 54
- Issue
- 24
- Pages
- 16166-16175
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W3106715001
- Cited by
- 130
- References
- 24
- Citations by year
- 2026: 20 · 2025: 32 · 2024: 20 · 2023: 21 · 2022: 25 · 2021: 12
- FWCI
- 5.21
- Type
- journal article
- Language
- en
- Open access
- green
- orbit.dtu.dk
- Licence
- Locations
- Environmental Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Technical University of Denmark, DTU Orbit (Technical University of Denmark, DTU) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Sustainability and Ecological Systems Analysis
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Keywords
- circular economy, plastic recycling, PET, polyethylene, polypropylene, plastic waste, downcycling, recycling rate, design for recycling, plastic waste exports, waste collection, product lifetime, demand stabilization, closed-loop recycling, Europe
- MeSH terms
- Europe, Plastics, Prospective Studies, Product Packaging, Positron-Emission Tomography, Recycling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.