Dynamic Material Flow Analysis of PET, PE, and PP Flows in Europe: Evaluation of the Potential for Circular Economy
Open accessThe DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Abstract
This study evaluates the potential circularity of PET, PE, and PP flows in Europe based on dynamic material flow analysis (MFA), considering product lifetimes, demand growth rates, and quality reductions of recycled plastic (downcycling). The circularity was evaluated on a baseline scenario, representing 2016 conditions, and on prospective scenarios representing key circularity enhancing initiatives, including (i) maintaining constant plastic consumption, (ii) managing waste plastic exports in the EU, (iii) design-for-recycling initiatives, (iv) improved collection, and (v) improved recovery and reprocessing. Low recycling rates ( RR, 13–20%) and dependence on virgin plastic, representing 85–90% of the annual plastic demand, were demonstrated after 50 years in the baseline. Limited improvements were related to the individual scenarios, insufficient to meet existing recycling targets. However, by combining initiatives, RRs above 55%, where 75–90% was recycled in a closed loop, were demonstrated. Moreover, 40–65% of the annual demand could potentially be covered by recycled plastic. Maintaining a constant plastic demand over time was crucial in order to reduce the absolute dependence on virgin plastic, which was not reflected by the RR . Thus, focusing strictly on RRs and even whether and to which extent virgin material is substituted, is insufficient for evaluating the transition toward circularity, which cannot be achieved by technology improvements alone—the demand must also be stabilized.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The text we found for this paper looks like another document, so the self-check wasn’t run.
Citations
Cites
Production, use, and fate of all plastics ever made
Geyer, R., Jambeck, J. R., & Law, K. L. (2017) · Science Advances · doi:10.1126/sciadv.1700782 · Cited by 18,606
Mechanical and chemical recycling of solid plastic waste
Ragaert, K., Delva, L., & Van Geem, K. (2017) · Waste Management · doi:10.1016/j.wasman.2017.07.044 · Cited by 3,276
Mapping Global Flows of Chemicals: From Fossil Fuel Feedstocks to Chemical Products
Levi, P. G., & Cullen, J. M. (2018) · Environmental Science & Technology · doi:10.1021/acs.est.7b04573 · Cited by 392
Plastic waste from recycling centres: characterisation and evaluation of plastic recyclability
Faraca, G., & Astrup, T. (2019) · Waste Management · doi:10.1016/j.wasman.2019.06.038 · Cited by 370
Self-citationPerugini, F., Mastellone, M. L., & Arena, U. (2005) · Environmental Progress · doi:10.1002/ep.10078 · Cited by 347
EFSA Panel on food contact materials, E. (2011) · EFSA Journal · doi:10.2903/j.efsa.2011.2184 · Cited by 334
Eriksen, M. K., Christiansen, J. D., Daugaard, A. E., & Astrup, T. F. (2019) · Waste Management · doi:10.1016/j.wasman.2019.07.005 · Cited by 329
Self-citationCommon Misconceptions about Recycling
Geyer, R., Kuczenski, B., Zink, T., & Henderson, A. (2016) · Journal of Industrial Ecology · doi:10.1111/jiec.12355 · Cited by 299
Plastic waste as a fuel - CO2-neutral or not?
Eriksson, O., & Finnveden, G. (2009) · Energy & Environmental Science · doi:10.1039/b908135f · Cited by 272
Circular economy of plastic packaging: Current practice and perspectives in Austria
Van Eygen, E., Laner, D., & Fellner, J. (2018) · Waste Management · doi:10.1016/j.wasman.2017.11.040 · Cited by 262
Research works printed but not linked: 6
- European Plastic Industry, 2018, The European Plastics Industry Circular Economy Voluntary Commitments towards 50% Plastics Waste Recycling
- World Economic Forum, 2016, The New Plastics Economy-Rethinking the Future of Plastics
- PlasticsEurope Market Research Group (PEMRG)/Consultic Marketing & Industrieberatung GmbH, 2017, Plastics—the Facts 2017, 16
- EC, 2008, Off. J. Eur. Communities, 86, 9
- PlasticsEurope, 2017, Plastics—the Facts 2017: Analysis of European Plastics Production, Demand and Waste Data
- European Union, 2019, Environmental Impact Assessments of Innovative Bio-Based Product
Cited by
Complexities of the global plastics supply chain revealed in a trade-linked material flow analysis
Houssini, K., Li, J., & Tan, Q. (2025) · Communications Earth & Environment · doi:10.1038/s43247-025-02169-5 · Cited by 363
Antonopoulos, I., Faraca, G., & Tonini, D. (2021) · Waste Management · doi:10.1016/j.wasman.2021.04.002 · Cited by 301
Self-citationA review of the plastic value chain from a circular economy perspective
Johansen, M. R., Christensen, T. B., Ramos, T. M., & Syberg, K. (2022) · Journal of Environmental Management · doi:10.1016/j.jenvman.2021.113975 · Cited by 279
Microplastics remediation in aqueous systems: Strategies and technologies
Hu, K., Tian, W., Yang, Y., Nie, G., Zhou, P., Wang, Y., Duan, X., & Wang, S. (2021) · Water Research · doi:10.1016/j.watres.2021.117144 · Cited by 204
Linear, Graft, and Beyond: Multiblock Copolymers as Next-Generation Compatibilizers
Self, J. L., Zervoudakis, A. J., Peng, X., Lenart, W. R., Macosko, C. W., & Ellison, C. J. (2022) · JACS Au · doi:10.1021/jacsau.1c00500 · Cited by 194
Smith, R. L., Takkellapati, S., & Riegerix, R. C. (2022) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c06845 · Cited by 176
Afshar, S. V., Boldrin, A., Astrup, T. F., Daugaard, A. E., & Hartmann, N. B. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2023.140000 · Cited by 200
“Additionally, large quantities of conventional plastics are stocked in our society, and proper end-of-life management should be ensured long into the future (Geyer et al., 2017; Eriksen et al., 2020).”
BackgroundSelf-citationCritical review of global plastics stock and flow data
Wang, C., Liu, Y., Chen, W., Zhu, B., Qu, S., & Xu, M. (2021) · Journal of Industrial Ecology · doi:10.1111/jiec.13125 · Cited by 146
Material Flows of Polyurethane in the United States
Liang, C., Gracida-Alvarez, U. R., Gallant, E. T., Gillis, P. A., Marques, Y. A., Abramo, G. P., Hawkins, T. R., & Dunn, J. B. (2021) · Environmental Science & Technology · doi:10.1021/acs.est.1c03654 · Cited by 157
Lase, I. S., Tonini, D., Caro, D., Albizzati, P. F., Cristóbal, J., Roosen, M., Kusenberg, M., Ragaert, K., Geem, K. M. V., Dewulf, J. P., et al. (2023) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2023.106916 · Cited by 153
Potentials and limits of mechanical plastic recycling
Klotz, M., Haupt, M., & Hellweg, S. (2023) · Journal of Industrial Ecology · doi:10.1111/jiec.13393 · Cited by 137
Lase, I. S., Bashirgonbadi, A., van Rhijn, F., Dewulf, J. P., Ragaert, K., Delva, L., Roosen, M., Brandsma, M., Langen, M., & Meester, S. D. (2022) · Waste Management · doi:10.1016/j.wasman.2022.09.002 · Cited by 92
Recognizing the long-term impacts of plastic particles for preventing distortion in decision-making
Gontard, N., David, G., Guilbert, A., & Sohn, J. L. (2022) · Nature Sustainability · doi:10.1038/s41893-022-00863-2 · Cited by 83
An, J., Wu, F., Wang, D., & You, J. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2022.106161 · Cited by 79
Limited utilization options for secondary plastics may restrict their circularity
Klotz, M., Haupt, M., & Hellweg, S. (2022) · Waste Management · doi:10.1016/j.wasman.2022.01.002 · Cited by 75
Flows and waste reduction strategies of PE, PP, and PET plastics under plastic limit order in China
Chu, J., Zhou, Y., Cai, Y., Wang, X., Li, C., & Liu, Q. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2022.106668 · Cited by 71
Application of hyperspectral and deep learning in farmland soil microplastic detection
Ai, W., Chen, G., Yue, X., & Wang, J. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2022.130568 · Cited by 61
Tracing fossil-based plastics, chemicals and fertilizers production in China
Jiang, M., Cao, Y., Liu, C., Chen, D., Zhou, W., Wen, Q., Yu, H., Jiang, J., Ren, Y., Hu, S., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-47930-0 · Cited by 60
What to Do about Plastics? Lessons from a Study of United Kingdom Plastics Flows
Drewniok, M., Gao, Y., Cullen, J. M., & Serrenho, A. C. (2023) · Environmental Science & Technology · doi:10.1021/acs.est.3c00263 · Cited by 66
Kahlert, S., & Bening, C. R. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2022.106279 · Cited by 64
Towards a circular economy for PET bottle resin using a system dynamics inspired material flow model
Ghosh, T., Avery, G., Bhatt, A. H., Uekert, T., Walzberg, J., & Carpenter, A. C. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135208 · Cited by 60
Assessment of the energy recovery potential of municipal solid waste under future scenarios
Istrate, I.-R., Medina-Martos, E., Gálvez‐Martos, J., & Dufour, J. (2021) · Applied Energy · doi:10.1016/j.apenergy.2021.116915 · Cited by 57
Kawecki, D., Wu, Q., Gonçalves, J. S. V., & Nowack, B. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2021.105733 · Cited by 50
Information-Based Plastic Material Tracking for Circular Economy—A Review
Rumetshofer, T., & Fischer, J. (2023) · Polymers · doi:10.3390/polym15071623 · Cited by 71
Circular plastic economy for sustainable development: current advances and future perspectives
Anwar, M., Konnova, M. E., & Dastgir, S. (2025) · RSC Sustainability · doi:10.1039/d5su00225g · Cited by 70
Liu, Z., & Nowack, B. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.106071 · Cited by 52
Duan, C., Wang, Z., Zhou, B., & Yao, X. (2024) · Sustainability · doi:10.3390/su16103926 · Cited by 63
Han, J., Zuo, J., Zillante, G., Chang, R., & Du, L. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108280 · Cited by 63
Rostek, L., Espinoza, L. A. T., Goldmann, D., & Loibl, A. (2022) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2022.106154 · Cited by 46
Operational Framework to Quantify “Quality of Recycling” across Different Material Types
Roosen, M., Tonini, D., Albizzati, P. F., Caro, D., Cristóbal, J., Lase, I. S., Ragaert, K., Dumoulin, A., & Meester, S. D. (2023) · Environmental Science & Technology · doi:10.1021/acs.est.3c03023 · Cited by 50
Kan, M., Wang, C., Zhu, B., Chen, W., Liu, Y., Ren, Y., & Xu, M. (2023) · Journal of Industrial Ecology · doi:10.1111/jiec.13427 · Cited by 38
“…flow analysis is adopted by massive existing studies (Huang et al., 2012; Müller et al., 2014) at the global (Geyer et al., 2017), regional (Eriksen et al., 2020; Kawecki et al., 2021b), and national scales (Jiang et al., 2020; Kawecki et al., 2021a; Lee et al., 2015; Luan et al., 2021;…”
MethodMehta, N., Cunningham, E., Doherty, M., Sainsbury, P., Bolaji, I., Nejad, B. F., & Smyth, B. M. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.106085 · Cited by 40
Chu, J., Zhou, Y., Cai, Y., Wang, X., Li, C., & Liu, Q. (2021) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2021.129872 · Cited by 42
Wiprächtiger, M., Haupt, M., Froemelt, A., Klotz, M., Beretta, C., Osterwalder, D., Burg, V., & Hellweg, S. (2022) · Journal of Industrial Ecology · doi:10.1111/jiec.13364 · Cited by 42
“MFA can be applied to model current and prospective flows and to analyze the effect of CE measures (Eriksen et al., 2020; Klotz et al., 2022; Lederer et al., 2020).”
MethodInnovative Approaches to Recycling, Upcycling, and Downcycling for Sustainable Waste Management
Ogwu, M. C., & Kosoe, E. A. (2025) · CleanMat. · doi:10.1002/clem.70013 · Cited by 57
“In Europe, dynamic material flow analyses have indicated that strategic policies aimed at improving the recovery and reprocessing of downcycled materials could substantially enhance circularity metrics in regional economies [96].”
Xia, L., Ke, Y., Wu, Z., Wang, J., Wang, R., Cai, Y., & Yang, Z. (2024) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2024.107429 · Cited by 36
Effects of Circularity Interventions in the European Plastic Packaging Sector
Cimpan, C., Bjelle, E. L., Budzinski, M., Wood, R. A., & Strømman, A. H. (2023) · Environmental Science & Technology · doi:10.1021/acs.est.2c08202 · Cited by 43
Liang, H., Dong, H., Zhang, C., Geng, Y., Liu, X., Liu, G., & Chen, Z. (2023) · iScience · doi:10.1016/j.isci.2023.107701 · Cited by 40
Yang, C., Zhang, L., Chen, Z., Gao, Y., & Xu, Z. (2022) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.130544 · Cited by 37
Laso, J., Ruiz‐Salmón, I., Margallo, M., Villanueva-Rey, P., Poceiro, L., Quinteiro, P. S. G. N., Dias, A. C., Almeida, C., Marques, A., Entrena-Barbero, E., et al. (2022) · Sustainability · doi:10.3390/su14053054 · Cited by 40
Gómez, J. M. O., Parrado, J., Pascual, J. A., Orts, Á., Cuartero, J., Tejada, M., & Ros, M. (2022) · Polymers · doi:10.3390/polym15010204 · Cited by 33
Abbasi, G., Hauser, M., Baldé, K., & Bouman, E. A. (2022) · Environment International · doi:10.1016/j.envint.2022.107693 · Cited by 30
Barracco, F., Parisi, E., Pipitone, G., Simone, E., Bensaid, S., & Fino, D. (2024) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-024-05467-1 · Cited by 28
“In the last century, the use of plastic in industry has significantly increased, reaching more than 300 million tons produced every year, and becoming one of the most used materials in the world (Eriksen et al. 2020).”
Callewaert, P., Raadal, H. L., & Lyng, K.-A. (2023) · Waste Management · doi:10.1016/j.wasman.2023.08.037 · Cited by 33
A Circular Economy Systems Engineering Framework for Waste Management of Photovoltaic Panels
Iseri, F., Iseri, H., Iakovou, E. T., & Pistikopoulos, E. N. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5c00588 · Cited by 31
Garcia, E. S., Huysveld, S., Nhu, T. T., Meester, S. D., & Dewulf, J. P. (2023) · Waste Management · doi:10.1016/j.wasman.2023.08.032 · Cited by 27
Comparing Parallel Plastic‐to‐X Pathways and Their Role in a Circular Economy for PET Bottles
Ghosh, T., Uekert, T., Walzberg, J., & Carpenter, A. C. (2023) · Advanced Sustainable Systems · doi:10.1002/adsu.202300068 · Cited by 26
Tan, J., Jia, S., & Ramakrishna, S. (2023) · Processes · doi:10.3390/pr11051457 · Cited by 29
Plastic end-of-life alternatives, with a focus on the agricultural sector
Galati, A., & Scalenghe, R. (2021) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2021.100681 · Cited by 25
Tanguay‐Rioux, F., Spreutels, L., Héroux, M., & Legros, R. (2022) · Waste Management · doi:10.1016/j.wasman.2022.04.025 · Cited by 22
Feedstock recycling of cable plastic residue via steam cracking on an industrial-scale fluidized bed
Vela, I. C., Maric, J., González-Arias, J., & Seemann, M. C. (2023) · Fuel · doi:10.1016/j.fuel.2023.129518 · Cited by 19
Jayalath, U. T., Samaraweera, H., & Samarasinghe, H. G. A. S. (2024) · Sustainable Chemistry for the Environment · doi:10.1016/j.scenv.2024.100190 · Cited by 24
Lipp, A.-M., & Lederer, J. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108193 · Cited by 24
Bayram, B., Deserno, L., & Greiff, K. (2024) · Circular Economy and Sustainability · doi:10.1007/s43615-024-00396-0 · Cited by 31
“A huge quantity of recycled materials is lost due to its low quality, and the stagnation of low-quality recycled materials cause a problem [115, 120, 173, 174 ].”
Additive inclusion in plastic life cycle assessments part I: Review of mechanical recycling studies
Logan, H. M., Astrup, T. F., & Damgaard, A. (2024) · Journal of Industrial Ecology · doi:10.1111/jiec.13542 · Cited by 24
Self-citationLiu, Y., Zheng, Z., Zhao, L., & Wang, Z. (2021) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2021.105839 · Cited by 15
Flow and stock accumulation of plastics in China: Patterns and drivers
Chu, J., Zhou, Y., Cai, Y., Wang, X., Li, C., & Liu, Q. (2022) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2022.158513 · Cited by 16
Farrelly, T. A., & Chitaka, T. Y. (2023) · Frontiers in Sustainability · doi:10.3389/frsus.2023.982357 · Cited by 16
“For example, a study conducted on the flows of PET, PE, and PP in Europe to evaluate the potential for a circular economy for plastics simply present plastic waste exports as “losses” (Eriksen et al., 2020).”
BackgroundSaxegård, S., Wikström, F., & Williams, H. (2024) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-024-02364-0 · Cited by 15
“As such MFA is regarded as an independent environmental assessment method (Elia et al. 2017) and is useful for addressing recycling systems (Eriksen et al. 2020).”
The role of biodegradable plastics in the global plastic future
Piao, Z., & Yao, Y. (2026) · Nature Reviews Clean Technology · doi:10.1038/s44359-025-00142-1 · Cited by 20
Schmidt, S., & Laner, D. (2025) · Waste Management · doi:10.1016/j.wasman.2025.02.048 · Cited by 13
Managing plastic pollution: the role and impact of material flow analysis
Zhang, W., Qian, Z., Sun, Y., Huang, H., Zuo, Q., & Gong, L. (2025) · Journal of Material Cycles and Waste Management · doi:10.1007/s10163-025-02254-z · Cited by 14
Fu, B., Wu, J., Chen, S., Cheng, J., Zheng, Z., Zhang, Y., Lin, X., & Xiao, L. (2025) · Water Research · doi:10.1016/j.watres.2025.123791 · Cited by 11
Evaluating the potential to reduce the global demand for polymers
Gao, Y., & Serrenho, A. C. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108518 · Cited by 14
How should we move towards plastic circularity?
Callewaert, P., & Raadal, H. L. (2024) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2024.107798 · Cited by 11
Gu, Y., Tuo, M., Wu, Y., Li, R., Hu, G., Li, Y., Song, H., & Zuo, T. (2025) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2025.145747 · Cited by 13
Pert, D., & Torres, A. I. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5c00273 · Cited by 9
Liu, X., Wang, D., Yin, Z., Sun, L., Pang, S., Liu, J., Li, W., Cui, S., Huang, W., Du, Y., et al. (2022) · Microbiology Spectrum · doi:10.1128/spectrum.02179-22 · Cited by 10
“Recycled plastics are more economically expensive than virgin plastic products, and the quality and performance of recycled plastic products are far inferior to those of new products, a phenomenon known as “down-cycling” (12).”
BackgroundDjouambi, N., Yallese, M. A., Kaddeche, M., Belhadi, S., & Hegedűs, G. (2023) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-023-12703-4 · Cited by 9
“Indeed, polymers, with or without reinforcement, are increasingly being used in various industrial applications, particularly in areas where lightness and mechanical strength are crucial [2].”
A review on micro and nano plastics removal from aqueous environment through bionanomaterials
Oza, H., & Pathak, T. (2024) · Interactions · doi:10.1007/s10751-024-02194-4 · Cited by 9
“The total amount of plastic produced worldwide in 2019 was 368 million metric tons (Mt), but within 20 years, that amount is expected to double [31].”
Xie, Y., Su, Q.-Z., Lin, Q., Zhong, H., Li, D., & Dong, B. (2025) · Food Packaging and Shelf Life · doi:10.1016/j.fpsl.2025.101463 · Cited by 11
Green synthesis of multifunctional bamboo-based nonwoven fabrics for medical treatment
Gao, Q., Huang, Y., Hu, J., Gan, J., & Yu, W. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.135473 · Cited by 7
Rigail-Cedeño, A. F., Cabrera, D., Vera‐Sorroche, J., Lazo, M., Adrián, E., & Perugachi, R. (2022) · Energy Reports · doi:10.1016/j.egyr.2022.07.101 · Cited by 7
Material flow analysis and modelling of the feedstock potential for recycling polystyrene
Castell-Rüdenhausen, M. Z. (2025) · Circular Economy · doi:10.1016/j.cec.2025.100127 · Cited by 6
Jiang, D., & Nowack, B. (2025) · Environmental Pollution · doi:10.1016/j.envpol.2025.126800 · Cited by 8
“In summary, compared to other plastic release models using similar methodologies for Europe, China, and global scales, our results show lower macro-and microplastic emissions.”
InfluentialZhao, Q., Chen, Q., Alqurashi, M., Alsaluli, A., & Mostafa, S. A. (2025) · REVIEWS ON ADVANCED MATERIALS SCIENCE · doi:10.1515/rams-2025-0118 · Cited by 7
Accounting for carbon flows into and from (bio)plastic in a national climate inventory
Sandberg, E., & Krook‐Riekkola, A. (2022) · GCB Bioenergy · doi:10.1111/gcbb.13017 · Cited by 6
“Eriksen et al. (2020) only consider mechanical recycling (i.e., reusing the same plastic material without chemically breaking it down into smaller molecules/olefins), which reaches its maximum potential when about 50% of all discarded plastic products are recycled this way.”
BackgroundMethodInfluentialScalenghe, R. (2024) · Heliyon · doi:10.1016/j.heliyon.2024.e40647 · Cited by 5
Cai, Y., Li, H., Zhou, Y., & Chu, J. (2024) · Sustainable Production and Consumption · doi:10.1016/j.spc.2024.12.005 · Cited by 5
Analysis of trade-offs of post-sorting plastic packaging
Schmuck, A., Belé, T. G. D. A., Withoeck, D., Geem, K. M. V., Ragaert, K., & Meester, S. D. (2026) · Nature · doi:10.1038/s41586-026-10606-4 · Cited by 5
“We developed a cluster-based material flow analysis 4,5,54,64–67 to quantify the availability of recycling feedstock for the EU27+3 and the USA under increasing levels of post-sorting residual waste.”
Wang, X., Yang, S., & Wang, Q. (2023) · Polymers for Advanced Technologies · doi:10.1002/pat.6141 · Cited by 5
Li, P.-C., Shih, H., & Ma, H. (2022) · Waste Management · doi:10.1016/j.wasman.2022.03.011 · Cited by 4
Schmidt, S., Verni, X.-F., Gibon, T., & Laner, D. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108620 · Cited by 4
Strategies for synergistic reduction of plastic leakage and greenhouse gas emissions in China
Bai, J., Huang, Z., Liu, X., Liu, Y., Tai, L., Lou, Z., Fellner, J., Liu, W., & Ma, W. (2026) · Nature Communications · doi:10.1038/s41467-026-69893-0 · Cited by 4
Chaudhari, U. S., Sedaghatnia, K., Reck, B. K., Maguire, K., Johnson, A. T., Watkins, D., Handler, R. M., Hossain, T., Hartley, D. S., Thompson, V. S., et al. (2024) · Frontiers in Sustainability · doi:10.3389/frsus.2024.1405427 · Cited by 6
Gómez, A., Barbero, E., & Sánchez-Sáez, S. (2024) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2023.2299932 · Cited by 4
Sánchez-Burgos, M. A., Pedreño-Rojas, M. A., Gálvez, F. P., & Rubio-de-Hita, P. (2023) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-023-02250-1 · Cited by 5
“Furthermore, this is a sensible practice that helps avoiding waste, reducing a growing environmental problem (Syberg et al. 2021; Elliott et al. 2020), and a way to extend plastic raw material useful life (Eriksen et al. 2020; Hahladakis and Iacovidou 2019) reducing plastic demand.”
Reichert, D., Maeder, M., & Fröhling, M. (2025) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2025.108266 · Cited by 3
Martínez-Gomez-Aldaraví, A., Llàcer-Montalvà, A., Báez-Chorro, M. A., & Vidal, B. (2025) · NDT & E International · doi:10.1016/j.ndteint.2025.103499 · Cited by 7
Zanon-Zotin, M., Fortes, P., Corbier, D., Deetman, S., Edelenbosch, O. Y., van Engelenburg, M., Hauenstein, C., Hertwich, E. G., Jiang, M., von Köckritz, L., et al. (2026) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2026.109053 · Cited by 3
Circular Economy of Waste Electronic Products Based on Gompertz Model
Guo, Y. (2025) · Process Integration and Optimization for Sustainability · doi:10.1007/s41660-024-00477-5 · Cited by 3
“The recycling rate mainly relied on raw plastics, accounting for 85–90% of annual plastic demand (Eriksen et al. 2020).”
Circular Economy and Recycling in Peru
De-La-Torre-Jave, E., Álvarez-Risco, A., & Del-Aguila-Arcentales, S. (2022) · CSR, sustainability, ethics & governance · doi:10.1007/978-3-030-94293-9_16 · Cited by 5
Gao, Y., Liu, X., Chen, W., Serrenho, A. C., Cimpan, C., & Liu, G. (2025) · ACS Sustainable Resource Management · doi:10.1021/acssusresmgt.5c00143 · Cited by 2
From curve to surface: Unraveling nonlinear dynamics in the resource–environment–economy nexus
Wang, Z., Zhang, G., Zhang, B., & Yin, G. (2025) · Fundamental Research · doi:10.1016/j.fmre.2025.10.010 · Cited by 2
Chang, T., Feng, H., Fang, R., & Yin, F. (2025) · Energy Nexus · doi:10.1016/j.nexus.2025.100607 · Cited by 2
Molenbuur, M., Ortiz-de-Montellano, C. G.-S., Meester, S. D., van der Meer, Y., Golkaram, M., & Ragaert, K. (2026) · Engineering · doi:10.1016/j.eng.2025.12.044 · Cited by 2
Zhao, J., & Zhu, Q. (2022) · Mobile Information Systems · doi:10.1155/2022/7905576 · Cited by 2
“[7], and others have looked into the impact of energy intensity and efficiency.”
BackgroundSecondary Treatment Facilitating the Mechanical Recycling of Film-Coated Waste Automobile Bumpers
Takayama, T., Niiyama, T., Tanabe, T., & Yu, J. (2025) · Recycling · doi:10.3390/recycling10020074 · Cited by 2
“Additionally, broader considerations have been advanced, such as trends in European recycling processes and future projections of emissions [9,10].”
Production of Groundwater Resistance Mortar Using Glass Sand and Polypropylene Fibres
Mohammed, A. M., Hammadi, A. A., Alfahdawi, I. H., Aadi, A. S., & Al‐Hadithi, A. I. (2024) · Annales de Chimie Science des Matériaux · doi:10.18280/acsm.480207 · Cited by 2
“Nearly 25% of European plastic garbage is thrown away [24].”
Saxegård, S., Williams, H., & Wikström, F. (2025) · The International Journal of Life Cycle Assessment · doi:10.1007/s11367-025-02548-2 · Cited by 2
“However, it is uncertain whether recycling is the most resource-and environmentally efficient CE material strategy (Eriksen et al. 2018, 2020; Sanabria Garcia et al. 2023).”
Influential
Metadata
- Authors
- Eriksen, M. K., Pivnenko, K., Faraca, G., Boldrin, A., & Astrup, T. F.
- Affiliations
- Technical University of Denmark (DK)
- European Commission (BE)
- Corresponding author
- Eriksen, Marie Kampmann
- ORCID
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-11-23
- Volume
- 54
- Issue
- 24
- Pages
- 16166-16175
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W3106715001
- Cited by
- 130
- References
- 24
- Citations by year
- 2026: 20 · 2025: 32 · 2024: 20 · 2023: 21 · 2022: 25 · 2021: 12
- FWCI
- 5.21
- Type
- journal article
- Language
- en
- Open access
- green
- orbit.dtu.dk
- Licence
- Locations
- Environmental Science & Technology (publishedVersion)
- PubMed (publishedVersion)
- Technical University of Denmark, DTU Orbit (Technical University of Denmark, DTU) (submittedVersion, other-oa)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Sustainability and Ecological Systems Analysis
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Environmental Science › Pollution › Microplastics and Plastic Pollution
- Keywords
- circular economy, plastic recycling, PET, polyethylene, polypropylene, plastic waste, downcycling, recycling rate, design for recycling, plastic waste exports, waste collection, product lifetime, demand stabilization, closed-loop recycling, Europe
- MeSH terms
- Europe, Plastics, Prospective Studies, Product Packaging, Positron-Emission Tomography, Recycling
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.