The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Impacts of Vehicle Weight Reduction via Material Substitution on Life-Cycle Greenhouse Gas Emissions
Abstract
This study examines the vehicle-cycle and vehicle total life-cycle impacts of substituting lightweight materials into vehicles. We determine part-based greenhouse gas (GHG) emission ratios by collecting material substitution data and evaluating that alongside known mass-based GHG ratios (using and updating Argonne National Laboratory's GREET model) associated with material pair substitutions. Several vehicle parts are lightweighted via material substitution, using substitution ratios from a U.S. Department of Energy report, to determine GHG emissions. We then examine fuel-cycle GHG reductions from lightweighting. The fuel reduction value methodology is applied using FRV estimates of 0.15-0.25, and 0.25-0.5 L/(100km·100 kg), with and without powertrain adjustments, respectively. GHG breakeven values are derived for both driving distance and material substitution ratio. While material substitution can reduce vehicle weight, it often increases vehicle-cycle GHGs. It is likely that replacing steel (the dominant vehicle material) with wrought aluminum, carbon fiber reinforced plastic (CRFP), or magnesium will increase vehicle-cycle GHGs. However, lifetime fuel economy benefits often outweigh the vehicle-cycle, resulting in a net total life-cycle GHG benefit. This is the case for steel replaced by wrought aluminum in all assumed cases, and for CFRP and magnesium except for high substitution ratio and low FRV.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Environmental assessment of passenger transportation should include infrastructure and supply chains
Chester, M. V., & Horvath, A. (2009) · Environmental Research Letters · doi:10.1088/1748-9326/4/2/024008 · Cited by 592
Kim, H. C., & Wallington, T. J. (2013) · Environmental Science & Technology · doi:10.1021/es3042115 · Cited by 243
Modaresi, R., Pauliuk, S., Løvik, A. N., & Müller, D. B. (2014) · Environmental Science & Technology · doi:10.1021/es502930w · Cited by 137
Greenhouse gas emissions payback for lightweighted vehicles using aluminum and high-strength steel
Kim, H., McMillan, C., Keoleian, G. A., & Skerlos, S. J. (2010) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2010.00283.x · Cited by 130
Parametric assessment of climate change impacts of automotive material substitution
Geyer, R. (2008) · Environmental Science & Technology · doi:10.1021/es800314w · Cited by 62
Materials challenges and opportunities for enhancing the sustainability of automobiles
Keoleian, G. A., & Sullivan, J. L. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.52 · Cited by 42
Self-citation
Cited by
Rissman, J., Bataille, C., Masanet, E., Aden, N., Morrow, W. R., Zhou, N., Elliott, N., Dell, R., Heeren, N., Huckestein, B., et al. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.114848 · Cited by 1,040
“These materials often have higher embodied emissions per vehicle than the heavier materials they are replacing [194,204].”
BackgroundMaking sustainable aluminum by recycling scrap: The science of “dirty” alloys
Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., et al. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100947 · Cited by 626
Sustainability through alloy design: Challenges and opportunities
Cann, J. L., De Luca, A., Dunand, D. C., Dye, D., Miracle, D. B., Oh, H. S., Olivetti, E. A., Pollock, T. M., Poole, W. J., Yang, R., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100722 · Cited by 191
Furberg, A., Arvidsson, R., & Molander, S. (2022) · Journal of Industrial Ecology · doi:10.1111/jiec.13218 · Cited by 60
“Another study applied weight reduction potentials, in turn based on estimates and assumptions provided by automotive and materials industry experts, in their comparison of vehicle materials (Kelly et al., 2015).”
BackgroundCritical factors affecting life cycle assessments of material choice for vehicle mass reduction
Hottle, T., Caffrey, C., McDonald, J., & Dodder, R. (2017) · Transportation Research Part D: Transport and Environment · doi:10.1016/j.trd.2017.08.010 · Cited by 48
Metadata
- Authors
- Kelly, J. C., Sullivan, J. L., Burnham, A., & Elgowainy, A.
- Venue
- Environmental Science & Technology
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-10-07
- Volume
- 49
- Issue
- 20
- Pages
- 12535-12542
- ISSN
- 0013-936X (ISSN-L)
- 1520-5851
- OpenAlex
- W2197096849
- Cited by
- 180
- References
- 7
- FWCI
- 14.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.