Greenhouse gas emissions payback for lightweighted vehicles using aluminum and high-strength steel
Open accessAbstract
Summary: In this article we consider interactions between life cycle emissions and materials flows associated with lightweighting (LW) automobiles. Both aluminum and high‐strength steel (HSS) lightweighting are considered, with LW ranging from 6% to 23% on the basis of literature references and input from industry experts. We compare the increase in greenhouse gas (GHG) emissions associated with producing lightweight vehicles with the saved emissions during vehicle use. This yields a calculation of how many years of vehicle use are required to offset the added GHG emissions from the production stage. Payback periods for HSS are shorter than for aluminum. Nevertheless, achieving significant LW with HSS comparable to aluminum‐intensive vehicles requires not only material substitution but also the achievement of secondary LW by downsizing of other vehicle components in addition to the vehicle structure. GHG savings for aluminum LW varies strongly with location where the aluminum is produced and whether secondary aluminum can be utilized instead of primary. HSS is less sensitive to these parameters. In principle, payback times for vehicles lightweighted with aluminum can be shortened by closed‐loop recycling of wrought aluminum (i.e., use of secondary wrought aluminum). Over a 15‐year time horizon, however, it is unlikely that this could significantly reduce emissions from the automotive industry, given the challenges involved with enabling a closed‐loop aluminum infrastructure without downcycling automotive body structures.
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Cites
Change, I. P. O. C. (2007) · Cambridge University Press eBooks · doi:10.1017/cbo9780511546013 · Cited by 7,742 · see citing works
Miller, F. P., Vandome, A. F., & McBrewster, J. (2009) · Alphascript Pub. eBooks · Cited by 706 · see citing works
Automobile bodies: Can aluminum be an economical alternative to steel?
Roth, R., Clark, J. P., & Kelkar, A. S. (2001) · JOM · doi:10.1007/s11837-001-0131-7 · Cited by 160 · see citing works
Louis, H. (1931) · Angewandte Chemie · doi:10.1002/ange.19310440307 · Cited by 129 · see citing works
The life-cycle impacts of aluminum body-in-white automotive material
Das, S. (2000) · JOM · doi:10.1007/s11837-000-0173-2 · Cited by 103 · see citing works
Industrial Ecology of the Automobile: A Life Cycle Perspective
Keoleian, G. A., Kar, K., Manion, M., & Bulkley, J. (1997) · Deep Blue (University of Michigan) · doi:10.7302/22095 · Cited by 100 · see citing works
Self-citationKim, H.-J., Keoleian, G. A., & Skerlos, S. J. (2011) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2010.00288.x · Cited by 92 · see citing works
Self-citationEconomic Allocation in LCA: A Case Study About Aluminium Window Frames
Werner, F. M., & Richter, K. (2000) · The International Journal of Life Cycle Assessment · doi:10.1007/bf02979727 · Cited by 79 · see citing works
Parametric assessment of climate change impacts of automotive material substitution
Geyer, R. (2008) · Environmental Science & Technology · doi:10.1021/es800314w · Cited by 62 · see citing works
Determination of Weight Elasticity of Fuel Economy for ICE, Hybrid and Fuel Cell Vehicles
Wohlecker, R., Johannaber, M., & Espig, M. (2007) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2007-01-0343 · Cited by 58 · see citing works
Body-in-white material systems: A life-cycle cost comparison
Dieffenbach, J. R., & Mascarin, A. E. (1993) · JOM · doi:10.1007/bf03223304 · Cited by 27 · see citing works
Lifetime costing of the body-in-white: Steel vs. aluminum
Han, H. N., & Clark, J. P. (1995) · JOM · doi:10.1007/bf03221171 · Cited by 25 · see citing works
Modeling Costs and Fuel Economy Benefits of Lightweighting Vehicle Closure Panels
Montalbo, T. M., Roth, R., Kirchain, R., et al. (2008) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2008-01-0370 · Cited by 15 · see citing works
Materials used in new generation vehicles: supplies, shifts, and supporting infrastructure
Lab., T. (. S. O. R. N., Das, S., USDOE Assistant Secretary for Energy Efficiency and Renewable Energy, W., et al. (1997) · doi:10.2172/590028 · Cited by 12 · see citing works
The environmental impact of steel and aluminum body-in-whites
Han, H. N. (1996) · JOM · doi:10.1007/bf03221379 · Cited by 12 · see citing works
Operation of an Aluminum-Intensive Vehicle: Report on a Six-Year Project
Gaines, L. L., & Cuenca, R. M. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-2066 · Cited by 10 · see citing works
Supporting Infrastructure and Acceptability Issues for Materials Used in New Generation Vehicles
Das, S., Curlee, T. R., Jones, D. W., et al. (1999) · doi:10.2172/6657 · Cited by 7 · see citing works
Aluminum Usage in the PNGV and Its Impact on the Recycling Infrastructure
Ng, G. K., Miller, J. C., & Tessieri, M. B. (1999) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/1999-01-0674 · Cited by 4 · see citing works
Tessieri, M. B., & Ng, G. K. (1995) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 4 · see citing works
The lightweight potential of an aluminium-intensive vehicle
Wallentowitz, H., von Zengen, K.-H., Parr, T., et al. (2003) · ATZ - Automobiltechnische Zeitschrift · doi:10.1007/bf03224589 · Cited by 1 · see citing works
Flagged first, then by citations
Research works printed but not linked: 2
- Scamans, G. 2005. Aluminium structured vehicles: Myths and realities. Paper presented at the Light Metal Surface Science Annual Conference, Trondheim, Norway, 15-16 June 2005.
- Zapp, P., W. Kuckshinrichs, and G. Rombach. 2003. Long term supply of aluminium to the Euro- pean automotive industry. In Proceedings of Euro- pean Metallurgical Conference EMC 2003 1: 339- 354.
Cited by
Sorted by citations
Onat, N. C., Kucukvar, M., & Tatari, O. (2015) · Applied Energy · doi:10.1016/j.apenergy.2015.04.001 · Cited by 370 · see citing works
Kim, H. C., & Wallington, T. J. (2013) · Environmental Science & Technology · doi:10.1021/es3042115 · Cited by 243 · see citing works
Self-citationModaresi, R., Pauliuk, S., Løvik, A. N., & Müller, D. B. (2014) · Environmental Science & Technology · doi:10.1021/es502930w · Cited by 137 · see citing works
Nakamura, S., Kondo, Y., Matsubae, K., Nakajima, K., Tasaki, T., & Nagasaka, T. (2012) · Environmental Science & Technology · doi:10.1021/es3013529 · Cited by 95 · see citing works
Kim, H.-J., Keoleian, G. A., & Skerlos, S. J. (2011) · Journal of Industrial Ecology · doi:10.1111/j.1530-9290.2010.00288.x · Cited by 92 · see citing works
Self-citationCritical factors affecting life cycle assessments of material choice for vehicle mass reduction
Hottle, T., Caffrey, C., McDonald, J., & Dodder, R. (2017) · Transportation Research Part D: Transport and Environment · doi:10.1016/j.trd.2017.08.010 · Cited by 48 · see citing works
Life cycle assessment of thin-wall ductile cast iron for automotive lightweighting applications
Jhaveri, K., Lewis, G. M., Sullivan, J. L., & Keoleian, G. A. (2018) · Sustainable Materials and Technologies · doi:10.1016/j.susmat.2018.01.002 · Cited by 41 · see citing works
Self-citation
- Authors
- Kim, H., McMillan, C., Keoleian, G. A., & Skerlos, S. J.
- Affiliations
- University of Michigan (US)
- Corresponding author
- Kim, Hyung‐Ju
- Venue
- Journal of Industrial Ecology
- Published
- 2010-11-12
- Volume
- 14
- Issue
- 6
- Pages
- 929-946
- ISSN
- 1088-1980 (ISSN-L)
- 1530-9290
- OpenAlex
- W2100148687
- Cited by
- 130
- References
- 21
- Citations by year
- 2026: 6 · 2025: 3 · 2024: 7 · 2023: 12 · 2022: 16 · 2021: 12 · 2020: 10 · 2019: 8 · 2018: 12 · 2017: 5 · 2016: 6 · 2015: 5 · 2014: 7 · 2013: 7 · 2012: 12
- FWCI
- 6.43
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Locations
- Journal of Industrial Ecology (publishedVersion)
- Deep Blue (University of Michigan) (submittedVersion)
- Topics
- Physical Sciences › Environmental Science › Environmental Engineering › Environmental Impact and Sustainability
- Physical Sciences › Engineering › Mechanical Engineering › Engineering and Materials Science Studies
- Physical Sciences › Materials Science › Materials Chemistry › Material Selection and Properties
- Keywords
- automotive lightweighting, greenhouse gas emissions, aluminum, high-strength steel, payback period, life cycle assessment, closed-loop recycling, automotive industry, material flow
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
