Experimental and Simulation Study of Adsorption in Postcombustion Conditions Using a Microporous Biochar. 1. CO2 and N2 Adsorption
Open accessThe DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Abstract
The influence of N2 on CO2 adsorption was evaluated using a microporous biochar with a narrow pore size distribution. The adsorption isotherms of pure CO2 and N2 were measured at 0, 30, 50, and 70 °C up to 120 kPa and fitted to the Toth adsorption model. Dynamic breakthrough experiments were carried out in a fixed-bed adsorption unit using binary mixtures with compositions representative of different postcombustion streams (8–30% CO2) from ambient temperature to 70 °C. Dynamic adsorption experiments were simulated to validate the mathematical model of the adsorption process, as a necessary step for its later use for process design. The Ideal Adsorption Solution (IAS) theory, based on the pure component adsorption models, was used to account for competitive adsorption with satisfactory results. The information gathered in the present work will be used to extend the validity of the model to the adsorption of postcombustion streams containing H2O in part 2.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Thermodynamics of mixed‐gas adsorption
Myers, A. L., & Prausnitz, J. M. (1965) · AIChE Journal · doi:10.1002/aic.690110125 · Cited by 3,775
Principles of adsorption and adsorption processes
Kast, W. (1985) · Chemical Engineering and Processing: Process Intensification · doi:10.1016/0255-2701(85)80013-1 · Cited by 2,430
Adsorption Analysis: Equilibria and Kinetics: (With CD Containing Computer Matlab Programs)
Do, D. D. (1998) · Series on Chemical Engineering · doi:10.1142/p111 · Cited by 1,919
Adsorbents: Fundamentals and Applications
Yang, R. T. (2003) · doi:10.1002/047144409x · Cited by 1,182
Glueckauf, E. (1955) · Trans. Faraday Soc. · doi:10.1039/tf9555101540 · Cited by 967
Heat and mass transfer in packed beds
若尾, 法., & 影井, 清. (1982) · Gordon and Breach Science Publishers eBooks · Cited by 854
Dubinin, M. M. (1989) · Carbon · doi:10.1016/0008-6223(89)90078-x · Cited by 704
Effect of pore size on carbon dioxide sorption by carbide derived carbon
Presser, V., McDonough, J., Yeon, S.-H., & Gogotsi, Y. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01176f · Cited by 668
Gas Separation by Adsorption Processes
Yang, R. (1988) · Chemical Engineering Science · doi:10.1016/0009-2509(88)80096-4 · Cited by 665
Homogeneous and heterogeneous micropore structures in carbonaceous adsorbents
Dubinin, M. M., & Stoeckli, H. F. (1980) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(80)90346-x · Cited by 664
Research works printed but not linked: 2
- 2005, IPCC Special Report on Carbon Dioxide Capture and Storage, 442
- Bird, 1960, Transport Phenomena
Cited by
Biochar-based adsorbents for carbon dioxide capture: a critical review
Dissanayake, P. D., You, S., Igalavithana, A. D., Xia, Y., Bhatnagar, A., Gupta, S., Kua, H. W., Kim, S., Kwon, J.-H., Tsang, D. C. W., et al. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2019.109582 · Cited by 489
Activated carbons from biomass-based sources for CO2 capture applications
Abuelnoor, N., AlHajaj, A., Khaleel, M., Vega, L. F., & Abu-Zahra, M. R. M. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.131111 · Cited by 310
Strategic use of biochar for CO2 capture and sequestration
Jung, S., Park, Y.-K., & Kwon, E. E. (2019) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2019.04.012 · Cited by 268
Wen, C., Liu, T., Wang, D., Wang, Y., Chen, H., Luo, G., Zhou, Z., Li, C., & Xu, M. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2023.101098 · Cited by 252
A review on common adsorbents for acid gases removal: Focus on biochar
Bamdad, H., Hawboldt, K., & MacQuarrie, S. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.261 · Cited by 243
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101890 · Cited by 237
Recent advances in biochar-based adsorbents for CO2 capture
Guo, S., Li, Y., Wang, Y., Wang, L., Sun, Y., & Liu, L. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100059 · Cited by 201
Akinola, T. E., Prado, P. L. B., & Wang, M. (2022) · Applied Energy · doi:10.1016/j.apenergy.2022.119156 · Cited by 119
Yoro, K. O., Amosa, M. K., Sekoai, P. T., Mulopo, J. L., & Daramola, M. O. (2019) · International Journal of Sustainable Engineering · doi:10.1080/19397038.2019.1592261 · Cited by 91
“So far, different adsorbents with high CO2 adsorption capacity and selectivity have been developed and suggested for CO2 capture (Plaza et al. 2016; Singo et al. 2017; Titinchi et al. 2014; Wang et al. 2011; Sekoai and Yoro 2016; Yoro and Sekoai 2016); but details on their diffusion mechanism and…”
BackgroundBreakthrough adsorption study of activated carbons for CO2 separation from flue gas
Mesfer, M. K. A., & Danish, M. (2018) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2018.06.042 · Cited by 80
Plaza, M. G., Rubiera, F., & Pevida, C. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b01508 · Cited by 68
Self-citationNitrogen Functionalized Biochar as a Renewable Adsorbent for Efficient CO2 Removal
Bamdad, H., Hawboldt, K., & MacQuarrie, S. (2018) · Energy & Fuels · doi:10.1021/acs.energyfuels.8b03056 · Cited by 64
Zhou, L., Richard, C., Ferronato, C., Chovelon, J., & Sleiman, M. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.145 · Cited by 65
Plaza, M. G., Durán, I., Querejeta, N., Rubiera, F., & Pevida, C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b01720 · Cited by 62
Self-citationPlaza, M. G., & Rubiera, F. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.079 · Cited by 53
Self-citationMesfer, M. K. A. (2020) · Environmental Science and Pollution Research · doi:10.1007/s11356-020-07934-x · Cited by 54
Mathematical modelling of carbon capture in a packed column by adsorption
Myers, T. G., Font, F., & Hennessy, M. G. (2020) · Applied Energy · doi:10.1016/j.apenergy.2020.115565 · Cited by 57
Akdağ, A. S., Durán, I., Güllü, G., & Pevida, C. (2022) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2022.108759 · Cited by 52
Self-citationPlaza, M. G., & Rubiera, F. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122002 · Cited by 39
Self-citationJuela, D. M. (2020) · Sustainable Environment Research · doi:10.1186/s42834-020-00063-7 · Cited by 38
“Aspen Adsorption® has typically been used to simulate gas phase adsorption processes, such as CO2 and CO adsorption, H2 and He purification [21, 22].”
MethodFeng, M., Zhang, W., Wu, X., Jia, Y., Jiang, C., Wei, H., Qiu, R., & Tsang, D. C. W. (2018) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2017.12.337 · Cited by 37
Durán, I., Rubiera, F., & Pevida, C. (2017) · Energies · doi:10.3390/en10060827 · Cited by 37
“The results presented herein are in good agreement with those from a previous work [21] carried out with a biomass based carbon adsorbent evaluated under post-combustion capture conditions (14% CO2 at ambient temperature).”
ResultSelf-citationYoro, K. O., Singo, M., Mulopo, J. L., & Daramola, M. O. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1294 · Cited by 39
Vacuum swing CO2 adsorption cycles in Waste-to-Energy plants
Durán, I., Rubiera, F., & Pevida, C. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.122841 · Cited by 29
Self-citationWang, Y., Jia, H., Fang, X., Qiu, Z., & Du, T. (2020) · RSC Advances · doi:10.1039/d0ra03736b · Cited by 29
Enhanced capacity to CO2 sorption in humid conditions with a K-doped biocarbon
Querejeta, N., Rubiera, F., & Pevida, C. (2018) · Journal of Energy Chemistry · doi:10.1016/j.jechem.2018.09.023 · Cited by 26
Self-citationParinyakit, S., & Worathanakul, P. (2021) · Processes · doi:10.3390/pr9071250 · Cited by 30
“The heat transfer to the environment was set as adiabatic (no external heat transfer) [20,21].”
BackgroundWater effect on adsorption carbon capture in metal-organic framework: A molecular simulation
Jiang, L., Xie, R. Y., Shi, W., Wu, E. Y., Li, B., & Zhang, X. J. (2022) · Carbon Capture Science & Technology · doi:10.1016/j.ccst.2022.100061 · Cited by 23
Querejeta, N., Gil, M. V., Rubiera, F., & Pevida, C. (2023) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.2210 · Cited by 28
Self-citationWilkes, M. D., & Brown, S. (2021) · Energy · doi:10.1016/j.energy.2022.123805 · Cited by 23
Adsorption-based Process Modelling for Post-combustion CO2 Capture
Plaza, M. G., Durán, I., Rubiera, F., & Pevida, C. (2017) · Energy Procedia · doi:10.1016/j.egypro.2017.03.1365 · Cited by 18
Self-citationSimple Procedure to Estimate Mass Transfer Coefficients from Uptake Curves on Activated Carbons
Siqueira, R. M., Vilarrasa‐García, E., Torres, A. E. B., Azevedo, D. C. S., & Bastos-Neto, M. (2018) · Chemical Engineering & Technology · doi:10.1002/ceat.201800091 · Cited by 19
Process design and adsorbent screening of VSA and exchanger type VTSA for flue gas CO2 capture
Chen, X., Wang, J., Du, T., Liu, L., & Li, G. K. (2024) · Separation and Purification Technology · doi:10.1016/j.seppur.2024.127641 · Cited by 13
Bordonhos, M., Severino, M. I., Marandi, A., Nouar, F., Jorge, M., Gomes, J. R. B., Serre, C., & Pinto, M. L. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.169276 · Cited by 14
The Carbon Chain in Carbon Dioxide Industrial Utilization Technologies: A Case Study
Wawrzyńczak, D., Majchrzak‐Kucęba, I., Pevida, C., Bonura, G., Nogueira, R., & Falco, M. D. (2022) · CRC Press eBooks · doi:10.1201/9781003336587 · Cited by 11
Self-citationRecent advances in software tools for adsorption science and engineering
Ga, S., & Chung, Y. G. (2022) · Molecular Systems Design & Engineering · doi:10.1039/d2me00036a · Cited by 10
Simulation study of fixed-bed CO2 adsorption from CO2/N2 mixture using activated carbon
Mesfer, M. K. A., Amari, A., Danish, M., Alwan, B. A. M. A., & Shah, M. (2020) · Chemical Engineering Communications · doi:10.1080/00986445.2020.1777111 · Cited by 9
“Microporous biochar was used for the experimental simulation studies for CO2 and N2 adsorption, and the mathematical model was validated (Plaza et al. 2016).”
MethodAbout adsorption effects on the poroelastic properties and gas permeability of COx claystone
Yuan, H., Agostini, F., Skoczylas, F., & Talandier, J. (2017) · European Journal of Environmental and Civil engineering · doi:10.1080/19648189.2017.1379444 · Cited by 8
Hassan, K. T., Madkhali, N., & Shihab, M. A. (2026) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2026.116262 · Cited by 7
Biochar in Carbon Sequestration
Shirzad, M., Karimi, M., Rodrigues, A. E., & Silva, J. A. C. (2023) · Materials horizons · doi:10.1007/978-981-99-5239-7_4 · Cited by 9
Comprehensive analysis of H₂O co-adsorption to CO₂ on honeycomb carbon monoliths
Querejeta, N., Rubiera, F., Gil, M. V., & Pevida, C. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.164627 · Cited by 6
Self-citationZiaee, O., Zolfaghari, N., Baghani, M., & Baniassadi, M. (2021) · Physica Scripta · doi:10.1088/1402-4896/ac2da4 · Cited by 5
Simulation Study of Post-Combustion CO 2 Adsorption Using Adsorbent
Ravi, M., Rathore, S. K., & Murugan, S. (2022) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2022-28-0318 · Cited by 5
End-use application of spent adsorbent from food waste – perspective of the circular economy
Nthwane, Y. B., Fouda-Mbanga, B. G., Mnyango, J. I., Phiri, C., Nyoni, B., Hlangothi, S. P., Tywabi-Ngeva, Z., Makgopa, K., Ndibewu, P. P., & Pillay, K. (2025) · Results in Engineering · doi:10.1016/j.rineng.2025.108058 · Cited by 5
Lotfinezhad, M., & Tahmasebpoor, M. (2025) · Journal of environmental chemical engineering · doi:10.1016/j.jece.2025.116218 · Cited by 4
Mesfer, M. K. A., Danish, M., Alwan, B. A. M. A., & Awwad, N. S. (2020) · Desalination and Water Treatment · doi:10.5004/dwt.2020.26268 · Cited by 4
Mesfer, M. K. A., Danish, M., Ali, I. H., & Khan, M. I. (2020) · Heat and Mass Transfer · doi:10.1007/s00231-020-02923-9 · Cited by 4
Carbon Capture in Metal–Organic Frameworks
Asgari, M., & Queen, W. L. (2018) · Wiley eBooks · doi:10.1002/9781119231059.ch1 · Cited by 4
Bio-based adsorbents for CO2 separation
Querejeta, N., Gil, M. V., Rodríguez, M., Rubiera, F., & Pevida, C. (2022) · CRC Press eBooks · doi:10.1201/9781003336587-4 · Cited by 2
Self-citationEngineered biochar as a potential adsorbent for carbon dioxide capture
Dissanayake, P. D., Palansooriya, K. N., Withana, P. A., Senadheera, S. S., Samaraweera, H., Wang, S., Yuan, X., Mašek, O., Shang, J., & Ok, Y. S. (2022) · Elsevier eBooks · doi:10.1016/b978-0-323-85343-9.00003-3 · Cited by 3
Vacuum-Pressure Swing Adsorption of CO 2 for Flexible Power GenerationPreprint
Wilkes, M. D., & Brown, S. (2021) · SSRN Electronic Journal · doi:10.2139/ssrn.3980424
Hou, X., Bellal, A., Nasah, J., der Watt, J. V., Xu, S., Laudal, D. A., & Hoffman, J. S. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4835128
Modeling and simulation of carbon capture by adsorption technologies
Dianat, M. J., Jamali, S., Mofarahi, M., & Rahimpour, M. R. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-19071-1.00010-4
Zhang, Y., & Ahn, H. (2025) · Resources Chemicals and Materials · doi:10.1016/j.recm.2025.100167 · Cited by 1
Innovative biobased materials in carbon capture technologies
Kumar, S., Sonowal, K., Dutta, A., Singh, S. B., Tchummegne, I. K., Dharanikota, N. P. S. K., & Mandal, B. (2026) · Elsevier eBooks · doi:10.1016/b978-0-443-36538-6.00010-3 · Cited by 1
Ravi, M., Rathore, S. K., & Murugan, S. (2026) · Greenhouse Gases Science and Technology · doi:10.1002/ghg.70021
Biochar: Sustainable Fabrication Techniques and Applications for CO2 Capture
Regalado, E. S., Botello-González, J., Loredo‐Cancino, M., Dávila-Guzmán, N. E., & Pioquinto-García, S. (2026) · Springer eBooks · doi:10.1007/978-3-031-87501-4_82-1
Biochar-Based CO 2 Adsorption for Aircraft Environmental Control Systems in Indian Climate
Swain, A., Sharma, K. K., Chaurasiya, P. K., & Kumar, R. S. (2026) · Journal of Thermophysics and Heat Transfer · doi:10.2514/1.t7501
The role of metal loading on CO2 capture using activated carbon from spent coffee grounds
Ngene, G. I., del Confetto, S., & Nzihou, A. (2026) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2026.101460
Metadata
- Authors
- Plaza, M. G., Durán, I., Querejeta, N., Rubiera, F., & Pevida, C.
- Affiliations
- Consejo Superior de Investigaciones Científicas (ES)
- Instituto Nacional del Carbón , INCAR-CSIC, Apartado 73 , ,
- Corresponding author
- Pevida, Covadonga
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-02-25
- Volume
- 55
- Issue
- 11
- Pages
- 3097-3112
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W4246383024
- Cited by
- 61
- References
- 33
- Citations by year
- 2026: 6 · 2025: 5 · 2024: 3 · 2023: 3 · 2022: 11 · 2021: 4 · 2020: 8 · 2019: 6 · 2018: 6 · 2017: 8 · 2016: 1
- FWCI
- 6.23
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- Industrial & Engineering Chemistry Research (publishedVersion, other-oa)
- DIGITAL.CSIC (Spanish National Research Council (CSIC)) (submittedVersion, other-oa)
- Funders
- Consejo Superior de Investigaciones Científicas (NA)
- European Social Fund (NA)
- Seventh Framework Programme (60855)
- Gobierno del Principado de Asturias (NA)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Keywords
- CO2 adsorption, nitrogen adsorption, post-combustion CO2 capture, competitive adsorption, binary gas mixtures, adsorption isotherms, Toth model, ideal adsorbed solution theory, fixed-bed adsorption, breakthrough experiments, adsorption modeling, narrow pore size distribution
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.