Renewable and Supertoughened Polylactide-Based Composites: Morphology, Interfacial Compatibilization, and Toughening Mechanism
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
Composites of poly(lactic acid) (PLA) and a series of renewable and biobased copolyesters (PLBSIs) were manufactured by melt blending to toughen PLA. Benefiting from reasonable macromolecular design, the introduction of lactic acid in PLBSIs not only increases the compatibility with PLA but also helps PLBSIs turn from crystalline plastic to amorphous elastomer. The increasing compatibility was proved by the decreasing particle size of PLBSIs in PLA, and the better toughening effect of elastomer than that of plastic was characterized by the thermal tensile test. Thus, the supertoughened PLA composites were obtained and exhibited maximum elongation at break of 324% and impact strength of 35.7 kJ/m 2, 50 and 15 times higher than neat PLA, respectively. Excellent performance in 3D-printed tensile tests implies the toughened PLA was ideal 3D-printing ink. The supertoughened PLA will eliminate the brittleness of PLA for wide application and possess great potential for industrial and engineering fields.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plant oil renewable resources as green alternatives in polymer science
Meier, M. A. R., Metzger, J. O., & Schubert, U. S. (2007) · Chemical Society Reviews · doi:10.1039/b703294c · Cited by 1,487
New emerging trends in synthetic biodegradable polymers—Polylactide: A critique
Gupta, A. P., & Kumar, V. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.06.045 · Cited by 941
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Plasticization of Poly(l-lactide) with Poly(propylene glycol)
Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M. (2006) · Biomacromolecules · doi:10.1021/bm060089m · Cited by 320
Dell'Erba, R., Groeninckx, G., Maglio, G., Malinconico, M., & Migliozzi, A. (2001) · Polymer · doi:10.1016/s0032-3861(01)00269-5 · Cited by 318
Plasticization of semicrystalline poly(l-lactide) with poly(propylene glycol)
Piorkowska, E., Kulinski, Z., Galeski, A., & Masirek, R. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.115 · Cited by 301
Relevance of PEG in PLA-based blends for tissue engineering 3D-printed scaffolds
Serra, T., Ortiz-Hernandez, M., Engel, E., Planell, J. A., & Navarro, M. (2014) · Materials Science and Engineering: C · doi:10.1016/j.msec.2014.01.003 · Cited by 206
Bioprocessing – no longer a field of dreams
Sawyer, D. J. (2003) · Macromolecular Symposia · doi:10.1002/masy.200351130 · Cited by 143
Odent, J., Leclère, P., Raquez, J.-M., & Dubois, P. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.006 · Cited by 86
Cited by
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Bio-based polyesters: Recent progress and future prospects
Zhang, Q., Song, M., Xu, Y., Wang, W., Wang, Z., & Zhang, L. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101430 · Cited by 433
Self-citationSuper Toughened Poly(lactic acid)-Based Ternary Blends via Enhancing Interfacial Compatibility
Wu, F., Misra, M., & Mohanty, A. K. (2019) · ACS Omega · doi:10.1021/acsomega.8b02587 · Cited by 79
Metadata
- Authors
- Hu, X., Li, Y., Li, M., Kang, H., & Zhang, L.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-08-19
- Volume
- 55
- Issue
- 34
- Pages
- 9195-9204
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2508864885
- Cited by
- 43
- References
- 9
- FWCI
- 1.50
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.