CO2 Capture in Chemically and Thermally Modified Activated Carbons Using Breakthrough Measurements: Experimental and Modeling Study
Open accessThe DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
Abstract
The development of adsorption-based technologies for CO 2 capture in the postcombustion processes requires finding materials with high capacity of adsorption and low cost of preparation. In this study, the modification of a commercial activated carbon (Norit ROX 0.8), considered as a solid adsorbent for CO 2 capture, and the effects of different methods of activations, chemically (hydrogen peroxide, sulfuric acid, nitric acid, and urea) and thermally (at 800 °C) on adsorption performance, have been investigated. Then, CO 2 adsorption capacity was studied at different temperatures and pressures to evaluate the effects of various agents on sample performance. The textural properties of the samples were determined using adsorption–desorption isotherms of nitrogen at −196 °C. Finally, the obtained data were modeled by Response Surface Methodology (RSM) and Langmuir isotherm. The results showed that the prepared sample by successive treatments with nitric acid, urea, and thermal calcination has a higher uptake capacity than other modified samples.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“generally, gas adsorption onto the porous carbons has a lower heat of adsorption than other sorbents [17], which nominates this adsorbent as an excellent candidate for cyclic adsorption processes [46].”
From Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions (2022) · cites this paper as [17]
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Thommes, M., Kaneko, K., Neimark, A. V., Olivier, J. P., Rodriguez-Reinoso, F., Rouquerol, J., & Sing, K. S. W. (2015) · Pure and Applied Chemistry · doi:10.1515/pac-2014-1117 · Cited by 21,202
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
THE CONSTITUTION AND FUNDAMENTAL PROPERTIES OF SOLIDS AND LIQUIDS. PART I. SOLIDS.
Langmuir, I. (1916) · Journal of the American Chemical Society · doi:10.1021/ja02268a002 · Cited by 9,997
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Studies on pore systems in catalysts V. The t method
LIPPENS, B. (1965) · Journal of Catalysis · doi:10.1016/0021-9517(65)90307-6 · Cited by 2,274
Modeling and optimization I: Usability of response surface methodology
Baş, D., & Boyacı, İ. H. (2007) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2005.11.024 · Cited by 2,151
Progress in carbon dioxide separation and capture: A review
Yang, H., Xu, Z., Fan, M., Gupta, R., Slimane, R. B., Bland, A. E., & Wright, I. (2008) · Journal of Environmental Sciences · doi:10.1016/s1001-0742(08)60002-9 · Cited by 2,087
Method for the calculation of effective pore size distribution in molecular sieve carbon.
HORVÁTH, G., & KAWAZOE, K. (1983) · JOURNAL OF CHEMICAL ENGINEERING OF JAPAN · doi:10.1252/jcej.16.470 · Cited by 1,967
Agricultural residues as precursors for activated carbon production—A review
Ioannidou, O., & Zabaniotou, A. (2007) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2006.03.013 · Cited by 1,528
Carbon Dioxide Capture and Storage
Metz, B., Davidson, O. R., de Coninck, H., Loos, M., & Meyer, L. (2005) · Cambridge University Press eBooks · Cited by 1,115
State-of-the-Art of CO2Capture with Ionic Liquids
Ramdin, M., de Loos, T. W., & Vlugt, T. J. H. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie3003705 · Cited by 1,073
Adsorption of CO2 on Molecular Sieves and Activated Carbon
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Poston, J. A. (2001) · Energy & Fuels · doi:10.1021/ef000241s · Cited by 943
Yazaydın, A. Ö., Snurr, R. Q., Park, T.-H., Koh, K., Liu, J., LeVan, M. D., Benin, A. I., Jakubczak, P., Lanuza, M., Galloway, D. B., et al. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9057234 · Cited by 907
Investigations of a complete pore structure analysis
Mikhail, R. S., Brunauer, S., & Bodor, E. E. (1968) · Journal of Colloid and Interface Science · doi:10.1016/0021-9797(68)90270-1 · Cited by 680
The energy–climate challenge: Recent trends in CO2 emissions from fuel combustion
Quadrelli, R., & Peterson, S. (2007) · Energy Policy · doi:10.1016/j.enpol.2007.07.001 · Cited by 627
Hao, G.-P., Li, W.-C., Qian, D., Wang, G.-H., Zhang, W.-P., Zhang, T., Wang, A.-Q., Schüth, F., Bongard, H.-J., & Lu, A.-H. (2011) · Journal of the American Chemical Society · doi:10.1021/ja203857g · Cited by 569
“Molecular Basket” Sorbents for Separation of CO2 and H2S from Various Gas Streams
Ma, X., Wang, X., & Song, C. (2009) · Journal of the American Chemical Society · doi:10.1021/ja8074105 · Cited by 532
A Microporous Metal−Organic Framework for Separation of CO2/N2 and CO2/CH4 by Fixed-Bed Adsorption
Bastin, L., Bárcia, P. S., Hurtado, E. J., Silva, J. A. C., Rodrigues, A. E., & Chen, B. (2008) · The Journal of Physical Chemistry C · doi:10.1021/jp077618g · Cited by 442
Self-citationPlaza, M. G., García, S., Rubiera, F., Pis, J. J., & Pevida, C. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.07.030 · Cited by 365
High‐Surface‐Area Carbon Molecular Sieves for Selective CO2 Adsorption
Wahby, A., Ramos‐Fernández, J. M., Martínez‐Escandell, M., Sepúlveda‐Escribano, A., Silvestre‐Albero, J., & Rodríguez‐Reinoso, F. (2010) · ChemSusChem · doi:10.1002/cssc.201000083 · Cited by 353
Silica-templated melamine–formaldehyde resin derived adsorbents for CO2 capture
Pevida, C., Drage, T. C., & Snape, C. E. (2008) · Carbon · doi:10.1016/j.carbon.2008.06.026 · Cited by 321
Ammendola, P., Raganati, F., & Chirone, R. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.04.037 · Cited by 314
Biomass derived low-cost microporous adsorbents for efficient CO 2 capture
Parshetti, G. K., Chowdhury, S., & Balasubramanian, R. (2015) · Fuel · doi:10.1016/j.fuel.2015.01.032 · Cited by 300
CO2 capture by activated and impregnated anthracites
Maroto-Valer, M. M., Tang, Z., & Zhang, Y. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.003 · Cited by 298
Wennersten, R., Sun, Q., & Li, H. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.09.023 · Cited by 283
Clean coal conversion processes – progress and challenges
Li, F., & Fan, L.-S. (2008) · Energy & Environmental Science · doi:10.1039/b809218b · Cited by 269
CO2 capture using some fly ash-derived carbon materials
Arenillas, A., Smith, K. M., Drage, T. C., & Snape, C. E. (2005) · Fuel · doi:10.1016/j.fuel.2005.04.003 · Cited by 263
Thermodynamics for the adsorption of SO2, NO and CO2 from flue gas on activated carbon fiber
Zhou, X., Yi, H., Tang, X., Deng, H., & Liu, H. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.06.013 · Cited by 252
Progress in hydrotalcite like compounds and metal-based oxides for CO2 capture: a review
Bhatta, L. K. G., Subramanyam, S., Chengala, M. D., Olivera, S., & Venkatesh, K. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.12.059 · Cited by 235
Radosz, M., Hu, X., Krutkramelis, K., & Shen, Y. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0707974 · Cited by 223
Development of low-cost biomass-based adsorbents for postcombustion CO2 capture
Plaza, M. G., Pevida, C., Arias, B., Fermoso, J., Casal, M. D., Martín, C. F., Rubiera, F., & Pis, J. J. (2009) · Fuel · doi:10.1016/j.fuel.2009.02.025 · Cited by 216
Carbon materials for catalysis
(2009) · Focus on Catalysts · doi:10.1016/s1351-4180(09)70147-3 · Cited by 203
Santos, V. P., Pereira, M. F. R., Faria, P. C. C., & Órfão, J. J. M. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.05.090 · Cited by 194
Sorbents for CO2 capture from high carbon fly ashes
Mercedes Maroto-Valer, M., Lu, Z., Zhang, Y., & Tang, Z. (2008) · Waste Management · doi:10.1016/j.wasman.2007.10.012 · Cited by 189
Climate change and variability over Malaysia: gaps in science and research information
Tangang, F., Juneng, L., Salimun, E., KwanMeng, S., LohJui, L., & Muhamad, H. (2012) · Sains Malaysiana · Cited by 159
Isotherm and Thermodynamic Analysis of Carbon Dioxide on Activated Carbon
Rashidi, N. A., Yusup, S., & Borhan, A. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.06.527 · Cited by 150
Kim, S., Son, W.-J., Choi, J.-S., & Ahn, W. (2008) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2008.02.025 · Cited by 149
Surface modification of low cost carbons for their application in the environmental protection
Arenillas, A., Rubiera, F., Parra, J. B., Ania, C. O., & Pis, J. J. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2005.02.076 · Cited by 148
In situ nitrogen enriched carbon for carbon dioxide capture
Thote, J. A., Iyer, K. S., Chatti, R. V., Labhsetwar, N. K., Biniwale, R. B., & Rayalu, S. S. (2009) · Carbon · doi:10.1016/j.carbon.2009.09.042 · Cited by 139
Ribeiro, R. S., Silva, A. M. T., Figueiredo, J. L., Faria, J. L., & Gomes, H. T. (2013) · Carbon · doi:10.1016/j.carbon.2013.06.001 · Cited by 136
Self-citationSorption and kinetics of CO2 and CH4 in binderless beads of 13X zeolite
Silva, J. A. C., Schumann, K., & Rodrigues, A. E. (2012) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2012.03.042 · Cited by 133
Self-citationCO2 adsorption onto synthetic activated carbon: Kinetic, thermodynamic and regeneration studies
Balsamo, M., BUDINOVA, T., Erto, A., Lancia, A., Petrova, B., Petrov, N. V., & Tsyntsarski, B. (2013) · Separation and Purification Technology · doi:10.1016/j.seppur.2013.05.041 · Cited by 130
Tan, Y. L., Islam, M. A., Asif, M., & Hameed, B. H. (2014) · Energy · doi:10.1016/j.energy.2014.09.079 · Cited by 127
Rashidi, N. A., Yusup, S. B., Borhan, A., & Loong, L. H. (2014) · Clean Technologies and Environmental Policy · doi:10.1007/s10098-014-0788-6 · Cited by 124
Sustainable and hierarchical porous Enteromorpha prolifera based carbon for CO2 capture
Zhang, Z., Wang, K., Atkinson, J. D., Yan, X., Li, X., Rood, M. J., & Yan, Z. (2012) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2012.05.094 · Cited by 120
A Glycerol‐based Carbon Catalyst for the Preparation of Biodiesel
Prabhavathi Devi, B. L. A., Gangadhar, K. N., Sai Prasad, P. S., Jagannadh, B., & Prasad, R. B. N. (2009) · ChemSusChem · doi:10.1002/cssc.200900097 · Cited by 119
Curbing the greenhouse effect by carbon dioxide adsorption with Zeolite 13X
Konduru, N., Lindner, P., & Assaf‐Anid, N. M. (2007) · AIChE Journal · doi:10.1002/aic.11318 · Cited by 98
Nanocrystalline Lithium Zirconate with Improved Kinetics for High-Temperature CO2 Capture
Ochoa-Fernández, E., Rønning, M., Grande, T., & Chen, D. (2006) · Chemistry of Materials · doi:10.1021/cm052075d · Cited by 93
Production and Applications of Activated Carbons
Rodríguez‐Reinoso, F. (2002) · Handbook of Porous Solids · doi:10.1002/9783527618286.ch24a · Cited by 81
Binary adsorption of CO2/CH4 in binderless beads of 13X zeolite
Silva, J. A. C., Cunha, A. F., Schumann, K., & Rodrigues, A. E. (2013) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2013.12.017 · Cited by 77
Self-citationZhao, C., Chen, X., & Zhao, C. (2012) · Energy & Fuels · doi:10.1021/ef200725z · Cited by 76
Single and Multicomponent Sorption of CO2, CH4and N2in a Microporous Metal-Organic Framework
Bárcia, P. S., Bastin, L., Hurtado, E. J., Silva, J. A. C., Rodrigues, A. E., & Chen, B. (2008) · Separation Science and Technology · doi:10.1080/01496390802282347 · Cited by 67
Self-citationIranshahi, D., Karimi, M., Amiri, S., Jafari, M., Rafiei, R., & Rahimpour, M. R. (2013) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2013.12.012 · Cited by 60
Self-citationCarbon dioxide adsorption on polyacrylamide-impregnated silica gel and breakthrough modeling
Zhao, Y., Shen, Y., Bai, L., & Ni, S. (2012) · Applied Surface Science · doi:10.1016/j.apsusc.2012.08.085 · Cited by 51
Influence of Dissolved Metals on N -Nitrosamine Formation under Amine-based CO 2 Capture Conditions
Wang, Z., & Mitch, W. A. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03085 · Cited by 47
García, S., Gil, M. V., Pis, J. J., Rubiera, F., & Pevida, C. (2012) · International journal of greenhouse gas control · doi:10.1016/j.ijggc.2012.10.018 · Cited by 42
Olivares-Marín, M., García, S., Pevida, C., Wong, M. S., & Maroto-Valer, M. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2011.06.031 · Cited by 41
Kinetics of Carbon Dioxide Sorption on Perovskite-Type Metal Oxides
Yang, Q. X., & Lin, Y. S. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie060264f · Cited by 38
Karimi, M., Rahimpour, M. R., Rafiei, R., Shariati, A., & Iranshahi, D. (2015) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2015.10.109 · Cited by 37
Self-citationMcDonald, J. D., Kracko, D. A., Doyle‐Eisele, M., et al. (2014) · Environmental Science & Technology · doi:10.1021/es5009505 · Cited by 37
Application of a compound containing silica for removing ammonium in aqueous media
Soltani, R. D. C., Safari, M., Rezaee, A., et al. (2014) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.11969 · Cited by 34
Karimi, M., Rahimpour, M. R., Rafiei, R., Jafari, M., Iranshahi, D., & Shariati, A. (2014) · Journal of Natural Gas Science and Engineering · doi:10.1016/j.jngse.2014.01.007 · Cited by 29
Self-citationNurrokhmah, L., Mezher, T., & Abu‐Zahra, M. R. M. (2013) · Environmental Science & Technology · doi:10.1021/es4027198 · Cited by 23
Farmers’ Adaptive Capacity towards the Impacts of Global Warming: A Review
Hamdan, M. E., Man, N. B., Yassin, S. M., et al. (2013) · Asian Social Science · doi:10.5539/ass.v9n13p177 · Cited by 9
CO2Adsorption on Porous Materials: Experimental and Simulation Study
Hu, J., & Liu, H. (2010) · ACS Symposium Series · doi:10.1021/bk-2010-1056.ch014 · Cited by 6
Research works printed but not linked: 4
- Tangang F. T., 2012, Sains Malays., 41, 1355
- Becnel J. M., 2002, American Society for Engineering Education Annual Conference & Exposition
- Pérez N., 2007, Lat. Am. Appl. Res., 37, 157
- Patrick J., 1995, Porosity in carbons: characterization and applications
Cited by
Carbon dioxide separation and capture by adsorption: a review
Karimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01589-z · Cited by 275
Self-citationKarimi, M., Shirzad, M., Silva, J. A. C., & Rodrigues, A. E. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.101890 · Cited by 237
Self-citationKarimi, M., Rodrigues, A. E., & Silva, J. A. C. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.130538 · Cited by 78
Self-citationCompost from Municipal Solid Wastes as a Source of Biochar for CO 2 Capture
Karimi, M., Diaz de Tuesta, J. L., d. P. Gonçalves, C. N., Gomes, H. T., Rodrigues, A. E., & Silva, J. A. C. (2020) · Chemical Engineering & Technology · doi:10.1002/ceat.201900108 · Cited by 68
Self-citationKarimi, M., Zafanelli, L. F. A. S., Almeida, J. P. P., Ströher, G. R., Rodrigues, A. E., & Silva, J. A. C. (2020) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2020.104069 · Cited by 66
Self-citation
Metadata
- Authors
- Karimi, M., C. Silva, J. A., Gonçalves, C. N. D. P., L. Diaz de Tuesta, J., Rodrigues, A. E., & Gomes, H. T.
- Affiliations
- Universidade do Porto (PT)
- Laboratory of Separation and Reaction Engineering (LSRE), Department of Chemical and Biological Technology, Polytechnic Institute of Bragança, Campus de Santa Apolonia, 5300-857 Bragança, Portugal
- Universidade Politécnica de Bragança (PT)
- Laboratory of Separation and Reaction Engineering - Laboratory of Catalysis and Materials (LSRE/LCM), Department of Chemical Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, S/N, 4099-002 Porto, Portugal
- Corresponding author
- Karimi, Mohsen
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-07-19
- Volume
- 57
- Issue
- 32
- Pages
- 11154-11166
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2883525495
- Semantic Scholar
- 1793374e7178db8f6619ceb56a2cdc6396b1bba1
- Cited by
- 70
- References
- 69
- Citations by year
- 2026: 9 · 2025: 7 · 2024: 8 · 2023: 15 · 2022: 10 · 2021: 9 · 2020: 7 · 2019: 4 · 2018: 1
- FWCI
- 3.35
- Type
- journal article
- Language
- en
- Open access
- green
- hdl.handle.net
- Licence
- other-oa
- Locations
- Industrial & Engineering Chemistry Research (publishedVersion)
- Portuguese National Funding Agency for Science, Research and Technology (RCAAP Project by FCT) (submittedVersion, other-oa)
- Funders
- European Regional Development Fund (POCI-01-0145-FEDER-006984, 0119_VALORCOMP_2_P)
- Fundação para a Ciência e a Tecnologia (0119_VALORCOMP_2_P, POCI-01-0145-FEDER-006984)
- Topics
- Physical Sciences › Chemical Engineering › Filtration and Separation › Carbon Dioxide Capture Technologies
- Physical Sciences › Environmental Science › Environmental Engineering › Industrial Gas Emission Control
- Physical Sciences › Environmental Science › Environmental Engineering › CO2 Sequestration and Geologic Interactions
- Keywords
- CO2 capture, activated carbon, post-combustion carbon capture, thermal activation, nitric acid treatment, urea treatment, hydrogen peroxide treatment, sulfuric acid treatment, adsorption capacity, Langmuir isotherm, response surface methodology, textural properties, adsorbent modification
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.