Amine-Grafted Silica Gels for CO2 Capture Including Direct Air Capture
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
A series of commercially available (and low-cost) silica gels were amine-grafted under dry conditions using N 1 -(3-trimethoxysilylpropyl)diethylenetriamine (i.e., “triamine”). CO 2 capture performance, pore properties, and amine loading were investigated, and the results showed that the silica gel with the largest pores (150A) was the most suitable for further enhancement. Amine loading needed to be increased in order to further enhance the CO 2 adsorption capacity. The addition of water during the grafting process was implemented on the 150A silica gel. The wet-grafted 150A silica gel exhibited a 2.3 mmol/g adsorption capacity at 75 ° C and 1 bar, which is comparable to the best literature reported values that used similar synthesis methods. The wet-grafted 150A exhibited good cycle stability as well as fast CO 2 uptake rates. The fixed-bed breakthrough capacity for air capture (ambient air with 415 ppm of CO 2 at 25 ° C) under dry (0.773 mmol/g) and wet (1.098 mmol/g) conditions are among the highest CO 2 capacities for air capture. The capacity of the low-surface area silica gel (150A, S.A. = 309 m 2 /g) rivaled those of the best of the SBA and MCM type materials, which was unexpected. These results indicate that wet-grafted silica gel 150A is a promising and low-cost sorbent for direct capture of CO 2 from ambient air and flue gas applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Direct Capture of CO2 from Ambient Air
Sanz-Pérez, E. S., Murdock, C. R., Didas, S. A., & Jones, C. W. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00173 · Cited by 2,406
Adsorbents: Fundamentals and Applications
Yang, R. T. (2003) · doi:10.1002/047144409x · Cited by 1,182
Self-citationStuckert, A. N., & Yang, R. T. (2011) · Environmental Science & Technology · doi:10.1021/es202647a · Cited by 289
Self-citation
Cited by
Direct air capture: process technology, techno-economic and socio-political challenges
Erans, M., Sanz-Pérez, E. S., Hanak, D. P., Clulow, Z., Reiner, D. M., & Mutch, G. A. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03523a · Cited by 688
Recent advances in direct air capture by adsorption
Zhu, X., Xie, W., Wu, J., Miao, Y., Xiang, C., Chen, C., Ge, B., Gan, Z., Yang, F., Zhang, M., et al. (2022) · Chemical Society Reviews · doi:10.1039/d1cs00970b · Cited by 456
Greenificated Molecularly Imprinted Materials for Advanced Applications
Ostovan, A., Arabi, M., Wang, Y., Li, J., Li, B., Wang, X., & Chen, L. (2022) · Advanced Materials · doi:10.1002/adma.202203154 · Cited by 442
Self-citationSorption direct air capture with CO2 utilization
Jiang, L., Liu, W., Wang, R. Q., Gonzalez-Diaz, A., Rojas-Michaga, M. F., Michailos, S., Pourkashanian, M., Zhang, X. J., & Font-Palma, C. (2023) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2022.101069 · Cited by 318
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Metadata
- Authors
- Anyanwu, J.-T., Wang, Y., & Yang, R. T.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-12-03
- Volume
- 59
- Issue
- 15
- Pages
- 7072-7079
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2993254970
- Cited by
- 136
- References
- 3
- FWCI
- 6.14
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Amine-Grafted Silica Gels for CO2 Capture Including Direct Air Capture. https://app.cochat.ai/papers/10.1021/acs.iecr.9b05228
- The paper
- Anyanwu, J.-T., Wang, Y., & Yang, R. T. (2020). Amine-Grafted Silica Gels for CO2 Capture Including Direct Air Capture. Industrial & Engineering Chemistry Research. https://doi.org/10.1021/acs.iecr.9b05228
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.