A Review on Lignin Liquefaction: Advanced Characterization of Structure and Microkinetic Modeling
The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Abstract
Lignin liquefaction microkinetics is a move toward a more first-principles (i.e., ab initio)-based understanding at the molecular level in reaction engineering. While the microkinetic modeling of reactions to obtain kinetic rate parameters of chemical reactions have been widely used in the field of gas phase combustion and heterogeneous catalysis, this approach has not been as thoroughly developed in the area of biomass thermochemical reactions (e.g., lignin pyrolysis, hydrothermal liquefaction). The difficulties in establishing the structure of complex heterogeneous materials, like lignin, is perhaps the main challenge in developing rational microkinetic descriptions of biomass thermochemical reactions. In this manuscript, we review the current state of the art and the challenges to develop microkinetic models for lignin liquefaction technologies (e.g., pyrolysis, hydrothermal liquefaction, solvolysis). A general strategy for the development of microkinetic models for lignin liquefaction technologies is discussed. The first hurdle is to obtain sufficiently rich experimental data of lignin underlying polymeric structure and methodologies to use this data to build realistic lignin structural representations. Some analytical techniques for lignin structural characterization and their associated data, as well as a correlation for calculating the degree of macromolecular lignin branching, are discussed. The presence of small lignin oligomeric structures and the role of these structures in lignin pyrolysis is also addressed. The ways in which elementary deconstruction and repolymerization reactions occur within this structure to form a liquid intermediate and how these deconstruction products continue to interact with each other until they are removed from the liquid intermediate is thoroughly discussed. Further, experimental work with model compounds and the effect of reaction parameters (e.g., temperature, pressure, vapor residence time) are reviewed. Another major challenge to develop microkinetic models of lignin liquefaction is to describe product removal mechanisms (e.g., evaporation, solubilization, thermal ejection) from the liquid intermediate. Group contribution methods are presented for estimation of thermophysical parameters, like normal boiling point and heat of vaporization for model structures. Once the products have been removed from the liquid intermediate, they continue reacting in the aerosol droplets, in vapor phase, or in the solvent depending on the liquefaction technology studied. These “secondary reactions” need to be included in realistic microkinetic models. Based on this review, we can state that with careful implementation, high-quality microkinetic models can be developed to simulate thermochemical lignin liquefaction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
Review of current and future softwood kraft lignin process chemistry
Chakar, F. S., & Ragauskas, A. J. (2004) · Industrial Crops and Products · doi:10.1016/j.indcrop.2004.04.016 · Cited by 1,203
Lignin structure and its engineering
Ralph, J., Lapierre, C., & Boerjan, W. (2019) · Current Opinion in Biotechnology · doi:10.1016/j.copbio.2019.02.019 · Cited by 1,054
Lignin depolymerisation strategies: towards valuable chemicals and fuels
Xu, C., Arancon, R. A. D., Labidi, J., & Luque, R. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00235k · Cited by 1,031
Kawamoto, H. (2017) · Journal of Wood Science · doi:10.1007/s10086-016-1606-z · Cited by 664
Towards quantitative catalytic lignin depolymerization
Roberts, V. M., Stein, V., Reiner, T., Lemonidou, A., Li, X., & Lercher, J. A. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201002438 · Cited by 543
Characterization and analysis of the molecular weight of lignin for biorefining studies
Tolbert, A., Akinosho, H., Khunsupat, R., Naskar, A. K., & Ragauskas, A. J. (2014) · Biofuels, Bioproducts and Biorefining · doi:10.1002/bbb.1500 · Cited by 504
Detailed kinetic modeling of the thermal degradation of lignins
Faravelli, T., Frassoldati, A., Migliavacca, G., & Ranzi, E. (2010) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2009.10.018 · Cited by 376
Effect of the Temperature on the Composition of Lignin Pyrolysis Products
Jiang, G., Nowakowski, D. J., & Bridgwater, A. V. (2010) · Energy & Fuels · doi:10.1021/ef100363c · Cited by 332
Jones, S. B., Valkenburg, C., Walton, C. W., Elliott, D. C., Holladay, J. E., Stevens, D. J., Kinchin, C., & Czernik, S. (2009) · doi:10.2172/949907 · Cited by 320
A mechanistic model of fast pyrolysis of hemicellulose
Zhou, X., Li, W., Mabon, R., & Broadbelt, L. J. (2018) · Energy & Environmental Science · doi:10.1039/c7ee03208k · Cited by 240
Self-citationGarcia-Perez, M., Wang, S., Shen, J., Rhodes, M., Lee, W. J., & Li, C.-Z. (2008) · Energy & Fuels · doi:10.1021/ef7007634 · Cited by 235
Hydrogen donor solvents in liquefaction of biomass: A review
Isa, K. M., Abdullah, T. A. T., & Ali, U. F. M. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.006 · Cited by 218
Primary and secondary lignin pyrolysis reaction pathways
Jegers, H. E., & Klein, M. T. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200028a030 · Cited by 182
Product compositions and kinetics in the rapid pyrolysis of milled wood lignin
Nunn, T. R., Howard, J. B., Longwell, J. P., & Peters, W. A. (1985) · Industrial & Engineering Chemistry Process Design and Development · doi:10.1021/i200030a054 · Cited by 175
Kinetic Analysis of Lignin Hydrothermal Conversion in Sub- and Supercritical Water
Yong, T. L.-K., & Matsumura, Y. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie400600x · Cited by 149
Reaction Kinetics of the Lignin Conversion in Supercritical Water
Yong, T. L.-K., & Matsumura, Y. (2012) · Industrial & Engineering Chemistry Research · doi:10.1021/ie300921d · Cited by 144
Thermal reactivities of catechols/pyrogallols and cresols/xylenols as lignin pyrolysis intermediates
Asmadi, M., Kawamoto, H., & Saka, S. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.04.012 · Cited by 136
Free-Radical Analysis on Thermochemical Transformation of Lignin to Phenolic Compounds
Hu, J., Shen, D., Xiao, R., Wu, S., & Zhang, H. (2013) · Energy & Fuels · doi:10.1021/ef3016602 · Cited by 116
A Multitechnique Characterization of Lignin Softening and Pyrolysis
Shrestha, B., le Brech, Y., Ghislain, T., Leclerc, S., Carré, V., Aubriet, F., Hoppe, S., Marchal, P., Pontvianne, S., Brosse, N., et al. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01130 · Cited by 108
Self-citationPyrolysis of lignin and IR analysis of residues
Pasquali, C. E. L., & Herrera, H. (1997) · Thermochimica Acta · doi:10.1016/s0040-6031(97)00059-2 · Cited by 107
Arturi, K. R., Strandgaard, M., Nielsen, R. P., Søgaard, E. G., & Maschietti, M. (2017) · The Journal of Supercritical Fluids · doi:10.1016/j.supflu.2016.12.015 · Cited by 99
Thermal Liquefaction of Lignin to Aromatics: Efficiency, Selectivity, and Product Analysis
Kozliak, E. I., Kubátová, A., Artemyeva, A. A., Nagel, E., Zhang, C., Rajappagowda, R. B., & Smirnova, A. L. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b01046 · Cited by 98
Mechanism study on the pyrolysis of a synthetic β-O-4 dimer as lignin model compound
Wang, S., Ru, B., Dai, G., Shi, Z., Zhou, J., Luo, Z., Ni, M., & Cen, K. (2017) · Proceedings of the Combustion Institute · doi:10.1016/j.proci.2016.07.129 · Cited by 86
Building large microkinetic models with first-principles׳ accuracy at reduced computational cost
Sutton, J. E., & Vlachos, D. G. (2015) · Chemical Engineering Science · doi:10.1016/j.ces.2014.09.011 · Cited by 81
Fast pyrolysis of lignins with different molecular weight: Experiments and modelling
Marathe, P. S., Westerhof, R. J. M., & Kersten, S. R. A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.12.058 · Cited by 71
Asatryan, R., Bennadji, H., Bozzelli, J. W., Ruckenstein, E., & Khachatryan, L. (2017) · The Journal of Physical Chemistry A · doi:10.1021/acs.jpca.7b01656 · Cited by 46
Structural changes of chars produced from fast pyrolysis of lignin at 100–300 °C
Chua, Y. W., Yu, Y., & Wu, H. (2019) · Fuel · doi:10.1016/j.fuel.2019.115754 · Cited by 31
Cited by
Leng, E., Guo, Y., Chen, J., Liu, S., E, J., & Xue, Y. (2022) · Fuel · doi:10.1016/j.fuel.2021.122102 · Cited by 286
Basar, I. A., Liu, H., Carrere, H., Trably, E., & Eskicioglu, C. (2021) · Green Chemistry · doi:10.1039/d0gc04092d · Cited by 253
Hydrothermal liquefaction of lignin to aromatic chemicals: impact of lignin structure
Cao, Y., Zhang, C., Tsang, D. C. W., Fan, J., Clark, J. H., & Zhang, S. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c01617 · Cited by 128
Perspectives of Engineered Biochar for Environmental Applications: A Review
Haghighi Mood, S., Pelaez-Samaniego, M. R., & Garcia-Perez, M. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c01201 · Cited by 104
Metadata
- Authors
- Terrell, E., Dellon, L. D., Dufour, A., Bartolomei, E., Broadbelt, L. J., & Garcia-Perez, M.
- Venue
- Industrial & Engineering Chemistry Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-12-30
- Volume
- 59
- Issue
- 2
- Pages
- 526-555
- ISSN
- 0888-5885 (ISSN-L)
- 1520-5045
- OpenAlex
- W2997642714
- Cited by
- 71
- References
- 28
- FWCI
- 3.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.