The DOI matches its Crossref record; 14 of the 16 references it cites were found in a registry or an index; 2 of the 19 sources its claims cite were checked for support.
Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating and Hydrocracking: A Design Case
Open accessAbstract
The purpose of this study is to evaluate a processing pathway for converting biomass into infrastructure-compatible hydrocarbon biofuels. This design case investigates production of fast pyrolysis oil from biomass and the upgrading of that bio-oil as a means for generating infrastructure-ready renewable gasoline and diesel fuels. This study has been conducted using the same methodology and underlying basis assumptions as the previous design cases for ethanol. The overall concept and specific processing steps were selected because significant data on this approach exists in the public literature. The analysis evaluates technology that has been demonstrated at the laboratory scale or is in early stages of commercialization. The fast pyrolysis of biomass is already at an early stage of commercialization, while upgrading bio-oil to transportation fuels has only been demonstrated in the laboratory and at small engineering development scale. Advanced methods of pyrolysis, which are under development, are not evaluated in this study. These may be the subject of subsequent analysis by OBP. The plant is designed to use 2000 dry metric tons/day of hybrid poplar wood chips to produce 76 million gallons/year of gasoline and diesel. The processing steps include: 1.Feed drying and size reduction 2.Fast pyrolysis to a highly oxygenated liquid product 3.Hydrotreating of the fast pyrolysis oil to a stable hydrocarbon oil with less than 2% oxygen 4.Hydrocracking of the heavy portion of the stable hydrocarbon oil 5.Distillation of the hydrotreated and hydrocracked oil into gasoline and diesel fuel blendstocks 6. Hydrogen production to support the hydrotreater reactors. The “as received” feedstock to the pyrolysis plant will be “reactor ready.” This development will likely further decrease the cost of producing the fuel. An important sensitivity is the possibility of co-locating the plant with an existing refinery. In this case, the plant consists only of the first three steps: feed prep, fast pyrolysis, and upgrading. Stabilized, upgraded pyrolysis oil is transferred to the refinery for separation and finishing into motor fuels. The off-gas from the hydrotreaters is also transferred to the refinery, and in return the refinery provides lower-cost hydrogen for the hydrotreaters. This reduces the capital investment. Production costs near $2/gal (in 2007 dollars) and petroleum industry infrastructure-ready products make the production and upgrading of pyrolysis oil to hydrocarbon fuels an economically attractive source of renewable fuels. The study also identifies technical areas where additional research can potentially lead to further cost improvements.
Overview
CoChat Summary
## TL;DR
This design case evaluates a biomass-to-hydrocarbon fuel pathway using fast pyrolysis, hydrotreating, hydrocracking, and hydrogen production, targeting infrastructure-compatible gasoline and diesel. The stand-alone plant is estimated at $303 million (2007 basis) with an MFSP of $2.04/gal, while refinery co-location lowers capital to $188 million and MFSP to $1.74/gal.
## Key findings
- A stand-alone “n th” plant using 2,000 dry metric tons/day of hybrid poplar wood chips is designed to produce 76 million gallons/year of gasoline and diesel.
- The paper reports a capital cost of $303 million (2007 basis) for the stand-alone plant and a minimum fuels selling price of $2.04/gal ($1.34/gal ethanol equivalent basis) at 10% ROI.
- For a refinery-integrated configuration, capital investment falls to $188 million and MFSP to $1.74/gal ($1.14/gal ethanol equivalent basis).
- The process yields reported in the base case are 100 gal/st dry wood unadjusted for natural gas use, 65 gal/st dry wood on a 100% renewable feedstock basis, and ~100 gal/st dry wood on an LHV ethanol-equivalent basis; the carbon balance shows 55% of carbon ends in fuel products.
## Methods
- Conceptual process design and technoeconomic analysis using literature-based process flow diagrams, modeled in CHEMCAD, with capital costing from literature and Aspen Icarus, assembled in Excel, and evaluated by discounted cash flow.
- Basis: hybrid poplar wood chips delivered at 50 wt% moisture, with a 2,000 mtpd bone-dry feed rate and an assumed established (“nth”) plant.
- Main process analyzed: feed drying and size reduction, circulating fluidized bed fast pyrolysis at 520°C, two-stage hydrotreating to stable oil, hydrocracking of the heavy fraction, distillation to gasoline/diesel blendstocks, and steam reforming for hydrogen.
## Limitations
- The paper states that other pyrolytic processes and upgrading steps were not evaluated, and gasification pathways were also not addressed.
- It also states the technology is a goal case projected to be available between now and 2015, and that fast pyrolysis upgrading to transportation fuels had only been demonstrated at laboratory and small engineering development scale.
- Evident from the text: the analysis relies heavily on literature and vendor estimates and uses stoichiometric models for upgrading, so the results are design-case estimates rather than demonstration data.
Model-written summary of a shortened version of the paper’s full text (it is longer than we read). Check it against the paper before relying on it.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
2 Valid · 5 Not valid · 11 Not checked · 43 Own results and interpretations
The cited sources support only part of this claim — read each source’s verdict below.
In the paper
“Reducing the project contingency to three percent of the total capital project, (similar to that used in Phillips et al. 2007), reduces the selling price by about $0.22/gal.”
What the sources say
- Partly supportedcites Phillips et al. 2007 sourceExperimental — accuracy not yet measured
Table 15 (Section 4.1, Capital Costs; page not provided) uses a 3% project contingency, but calculates it as a percentage of total installed cost. The same table gives contingency as 2% of total project investment, so it does not support the cited comparison if “total capital project” means total project investment. The $0.22/gal reduction is the citing authors’ own calculation, not a result attributed to this source. (LLM, conf=0.86)
plainstates a causeSingle case- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
- Partly supported
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“The equipment spare sensitivity determines the product cost increase if both the pyrolysis unit and upgrading units had 3 reactors at 50% capacity each. This increases the selling price by about $0.21/gal.”
plainstates a cause- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: unclear — It is unclear whether the paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper states — it cites no source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“Gasoline, lb/100 lb feed 95 Depends on feed/conditions(a,b) Diesel, lb/100 lb feed 5 Depends on feed/conditions(a,b)”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“MFSP, $/gal 2.04”
plain- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
A result the paper reports from its own data — it cites no other source for it, so there is none to check. The quote shows it is in the paper.
In the paper
“LHV ethanol equivalent Fuel Product, gal/st dry wood, 100% renewable basis ~100”
hedged- Asserted: passes — The authors put it forward as true.
- Checkable: passes — It can be checked against evidence.
- Load-bearing: passes — The paper’s conclusions depend on it.
- Based: passes — The paper gives a reason why it holds.
30 more claims
Create a free account to see all 61 claims and every source verdict.
- Probably not a substantial claim. 11
- It may state two separate claims as one. 17
- The quote only partly states this claim. 1
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
Each contradiction between two passages listed here was confirmed by an independent check.
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“Table 5.3. Hydrotreating Conditions 1st Stage(a) 2nd Stage(a) Temperature, °F (°C) 465 (240) 700 (370) Pressure, psig 2500 2015”
“Stream No. 200 202 203 205 207 208 212 213 215 220 221 Temp F 110.6798 174.8342 430 465.5045 470 700 484.8971 481.4931 319.3935 150 110 Pres psig 1 2500 2495 2495 2490 2475 2475 2470 710.3041 705.3041 700.3041”
Rated minor: it would not touch a result — a value no result rests on, a p-value that stays on the same side of the significance level, or a conflict that is clerical, resolved elsewhere in the paper, or outside its own findings.
In the paper
“1 Fired Heater 8.35 40.00 mmbtuh 8.18 $378,000 2004 0.65 2.47 933,660 3,057,432 $1,237,827 2”
Reported 8.18 · recomputed 4.790419
Citations
Cites
Perry's chemical engineers' handbook
(2008) · Choice Reviews Online · doi:10.5860/choice.45-4393 · Cited by 10,121
Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review
Mohan, D., Pittman, C. U., & Steele, P. H. (2006) · Energy & Fuels · doi:10.1021/ef0502397 · Cited by 5,663
Plant design and economics for chemical engineers
Peters, M. S., & Timmerhaus, K. D. (1958) · Cited by 4,067
Historical Developments in Hydroprocessing Bio-oils
Elliott, D. C. (2007) · Energy & Fuels · doi:10.1021/ef070044u · Cited by 1,370
Self-citationAden, A., Ruth, M., Ibsen, K., Jechura, J., Neeves, K., Sheehan, J., Wallace, B., Montague, L., Slayton, A., & Lukas, J. (2002) · doi:10.2172/15001119 · Cited by 1,197
Handbook of Petroleum Refining Processes
Meyers, R. A. (2003) · Cited by 969
Chemical Process Equipment : Selection and Design
Walas, S. M. (1988) · Medical Entomology and Zoology · Cited by 889
Bridgwater, A. V., Toft, A. J., & Brammer, J. G. (2002) · Renewable and Sustainable Energy Reviews · doi:10.1016/s1364-0321(01)00010-7 · Cited by 617
A review of the chemical and physical mechanisms of the storage stability of fast pyrolysis bio-oils
Diebold, J. P. (1999) · doi:10.2172/753818 · Cited by 549
Large-Scale Pyrolysis Oil Production: A Technology Assessment and Economic Analysis
Ringer, M., Putsche, V., & Scahill, J. (2006) · doi:10.2172/894989 · Cited by 370
Cited by
Review of fast pyrolysis of biomass and product upgrading
Bridgwater, A. V. (2012) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.01.048 · Cited by 4,856
A review of catalytic upgrading of bio-oil to engine fuels
Mortensen, P. M., Grunwaldt, J.-D., Jensen, P. A., Knudsen, K. G., & Jensen, A. D. (2011) · Applied Catalysis A: General · doi:10.1016/j.apcata.2011.08.046 · Cited by 1,768
Kambo, H. S., & Dutta, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.01.050 · Cited by 1,746
Catalytic fast pyrolysis of lignocellulosic biomass
Liu, C., Wang, H., Karim, A. M., Sun, J., & Wang, Y. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60414d · Cited by 1,117
Techno-economic analysis of biomass fast pyrolysis to transportation fuels
Wright, M. M., Daugaard, D. E., Satrio, J. A., & Brown, R. C. (2010) · Fuel · doi:10.1016/j.fuel.2010.07.029 · Cited by 814
Metadata
- Authors
- Jones, S. B., Valkenburg, C., Walton, C. W., Elliott, D. C., Holladay, J. E., Stevens, D. J., Kinchin, C., & Czernik, S.
- Published
- 2009-02-28
- OpenAlex
- W1576941281
- Cited by
- 320
- References
- 16
- Citations by year
- 2026: 2 · 2025: 6 · 2024: 5 · 2023: 9 · 2022: 7 · 2021: 15 · 2020: 14 · 2019: 17 · 2018: 26 · 2017: 27 · 2016: 33 · 2015: 28 · 2014: 40 · 2013: 37 · 2012: 22
- Type
- report
- Language
- en
- Open access
- gold
- doi.org
- Locations
- OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) (submittedVersion)
- University of North Texas Digital Library (University of North Texas) (submittedVersion)
- Topics
- Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
- Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
- Physical Sciences › Chemical Engineering › Catalysis › Catalysis and Hydrodesulfurization Studies
- Keywords
- biomass-to-liquids, fast pyrolysis, hydrotreating, hydrocracking, bio-oil upgrading, renewable gasoline, renewable diesel, hybrid poplar, hydrogen production, production cost analysis, capital investment, process design, distillation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
The claim verdicts this report counts are experimental: their accuracy is not yet measured.
A language model drew the claims from the paper on 2026-10-06, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).
A second model labelled each claim on 2026-10-06 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).
Cited sources are checked with a language model’s help (gpt-6-sol).
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating and Hydrocracking: A Design Case. https://app.cochat.ai/papers/10.2172/949907
- The paper
- Jones, S. B., Valkenburg, C., Walton, C. W., Elliott, D. C., Holladay, J. E., Stevens, D. J., Kinchin, C., & Czernik, S. (2009). Production of Gasoline and Diesel from Biomass via Fast Pyrolysis, Hydrotreating and Hydrocracking: A Design Case. https://doi.org/10.2172/949907
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.