The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Efficient Monolithic Perovskite/Silicon Tandem Solar Cell with Cell Area >1 cm2
Open accessAbstract
Monolithic perovskite/crystalline silicon tandem solar cells hold great promise for further performance improvement of well-established silicon photovoltaics; however, monolithic tandem integration is challenging, evidenced by the modest performances and small-area devices reported so far. Here we present first a low-temperature process for semitransparent perovskite solar cells, yielding efficiencies of up to 14.5%. Then, we implement this process to fabricate monolithic perovskite/silicon heterojunction tandem solar cells yielding efficiencies of up to 21.2 and 19.2% for cell areas of 0.17 and 1.22 cm(2), respectively. Both efficiencies are well above those of the involved subcells. These single-junction perovskite and tandem solar cells are hysteresis-free and demonstrate steady performance under maximum power point tracking for several minutes. Finally, we present the effects of varying the intermediate recombination layer and hole transport layer thicknesses on tandem cell photocurrent generation, experimentally and by transfer matrix simulations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
De Wolf, S., Holovsky, J., Moon, S.-J., Löper, P., Niesen, B., Ledinsky, M., Haug, F.-J., Yum, J.-H., & Ballif, C. (2014) · The Journal of Physical Chemistry Letters · doi:10.1021/jz500279b · Cited by 2,851
Self-citationMasuko, K., Shigematsu, M., Hashiguchi, T., Fujishima, D., Kai, M., Yoshimura, N., Yamaguchi, T., Ichihashi, Y., Mishima, T., Matsubara, N., et al. (2014) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2014.2352151 · Cited by 1,233
Semi-transparent perovskite solar cells for tandems with silicon and CIGS
Bailie, C. D., Christoforo, M. G., Mailoa, J. P., Bowring, A. R., Unger, E. L., Nguyen, W. H., Burschka, J., Pellet, N., Lee, J. Z., Grätzel, M., et al. (2015) · Energy & Environmental Science · doi:10.1039/c4ee03322a · Cited by 741
A 2-terminal perovskite/silicon multijunction solar cell enabled by a silicon tunnel junction
Mailoa, J. P., Bailie, C. D., Johlin, E. C., Hoke, E. T., Akey, A. J., Nguyen, W. H., McGehee, M. D., & Buonassisi, T. (2015) · Applied Physics Letters · doi:10.1063/1.4914179 · Cited by 660
Monolithic perovskite/silicon-heterojunction tandem solar cells processed at low temperature
Albrecht, S., Saliba, M., Correa Baena, J. P., Lang, F., Kegelmann, L., Mews, M., Steier, L., Abate, A., Rappich, J., Korte, L., et al. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02965a · Cited by 649
Löper, P., Stuckelberger, M., Niesen, B., Werner, J., Filipič, M., Moon, S.-J., Yum, J.-H., Topič, M., De Wolf, S., & Ballif, C. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/jz502471h · Cited by 587
Self-citationFu, F., Feurer, T., Jäger, T., Avancini, E., Bissig, B., Yoon, S., Buecheler, S., & Tiwari, A. N. (2015) · Nature Communications · doi:10.1038/ncomms9932 · Cited by 491
Chiang, C.-H., Tseng, Z.-L., & Wu, C.-G. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta03674c · Cited by 338
17.6% stabilized efficiency in low-temperature processed planar perovskite solar cells
Tao, C., Neutzner, S., Colella, L., Marras, S., Srimath Kandada, A. R., Gandini, M., Bastiani, M. D., Pace, G., Manna, L., Caironi, M., et al. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01720c · Cited by 317
Monolithic Perovskite‐CIGS Tandem Solar Cells via In Situ Band Gap Engineering
Todorov, T. K., Gershon, T., Gunawan, O., Lee, Y. S., Sturdevant, C., Chang, L., & Guha, S. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500799 · Cited by 280
Sputtered rear electrode with broadband transparency for perovskite solar cells
Werner, J., Dubuis, G., Walter, A., Löper, P., Moon, S.-J., Nicolay, S., Morales-Masis, M., De Wolf, S., Niesen, B., & Ballif, C. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.06.024 · Cited by 266
Self-citationMaximum power tracking for photovoltaic power system
Hsiao, Y.-T., & Chen, C.-H. (2003) · Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344) · doi:10.1109/ias.2002.1042685 · Cited by 165
Low-Temperature High-Mobility Amorphous IZO for Silicon Heterojunction Solar Cells
Morales‐Masis, M., de Nicolás, S. M., Holovský, J., Wolf, S. D., & Ballif, C. (2015) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2015.2450993 · Cited by 155
Self-citationOrganic–Inorganic Halide Perovskites: Perspectives for Silicon-Based Tandem Solar Cells
Löper, P., Niesen, B., Moon, S.-J., de Nicolás, S. M., Holovský, J., Remes, Z., Ledinský, M., Haug, F., Yum, J., Wolf, S. D., et al. (2014) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2014.2355421 · Cited by 143
Self-citationOptics and Light Trapping for Tandem Solar Cells on Silicon
Lal, N., White, T. P., & Catchpole, K. (2014) · IEEE Journal of Photovoltaics · doi:10.1109/jphotov.2014.2342491 · Cited by 128
Eisenlohr, J., Lee, B. G., Benick, J., Feldmann, F., Drießen, M., Milenkovic, N., Bläsi, B., Goldschmidt, J. C., & Hermle, M. (2015) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2015.05.043 · Cited by 43
Dabirian, A., de Nicolás, S. M., Niesen, B., et al. (2015) · Advanced Materials Interfaces · doi:10.1002/admi.201500462 · Cited by 19
Self-citation
Cited by
Intriguing Optoelectronic Properties of Metal Halide Perovskites
Manser, J. S., Christians, J. A., & Kamat, P. V. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00136 · Cited by 2,020
23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability
Bush, K. A., Palmstrom, A. F., Yu, Z. J., Boccard, M., Cheacharoen, R., Mailoa, J. P., McMeekin, D. P., Hoye, R. L. Z., Bailie, C. D., Leijtens, T., et al. (2017) · Nature Energy · doi:10.1038/nenergy.2017.9 · Cited by 1,545
Perovskite-perovskite tandem photovoltaics with optimized band gaps
Eperon, G. E., Leijtens, T., Bush, K. A., Prasanna, R., Green, T., Wang, J. T.-W., McMeekin, D. P., Volonakis, G., Milot, R. L., May, R., et al. (2016) · Science · doi:10.1126/science.aaf9717 · Cited by 1,499
Sahli, F., Werner, J., Kamino, B. A., Bräuninger, M., Monnard, R., Paviet-Salomon, B., Barraud, L., Ding, L., Diaz Leon, J. J., Sacchetto, D., et al. (2018) · Nature Materials · doi:10.1038/s41563-018-0115-4 · Cited by 1,380
Self-citationHigh-efficiency crystalline silicon solar cells: status and perspectives
Battaglia, C., Cuevas, A., & De Wolf, S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03380b · Cited by 1,178
Self-citation
Metadata
- Authors
- Werner, J., Weng, C.-H., Walter, A., Fesquet, L., Seif, J. P., De Wolf, S., Niesen, B., & Ballif, C.
- Venue
- The Journal of Physical Chemistry Letters
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-12-24
- Volume
- 7
- Issue
- 1
- Pages
- 161-166
- ISSN
- 1948-7185 (ISSN-L)
- OpenAlex
- W2238266363
- Cited by
- 539
- References
- 19
- FWCI
- 34.00
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.