Solvent-Dependent Adsorption of Perfluorosulfonated Ionomers on a Pt(111) Surface Using Atomic Force Microscopy
The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
The adsorption behavior of perfluorosulfonated ionomers (PFSIs) on a Pt(111) surface in various solvents is investigated by in situ atomic force microscopy (AFM) and discussed on the basis of aggregation of PFSIs in the liquid phase. The AFM images show that, in an aqueous solution of PFSI (0.1 wt % Nafion + 99.9 wt % water), PFSI aggregates with a lateral size of 20-200 nm adsorb on the Pt(111) surface. In a PFSI solution containing a small amount of 1-propanol (0.1 wt % Nafion + 99.5 wt % water + 0.4 wt % 1-propanol), however, slightly smaller aggregates adsorb on the Pt(111) surface. Such solvent-dependent sizes of adsorbed aggregates are in reasonable agreement with apparent hydrodynamic radii of PFSIs in the corresponding solutions determined by dynamic light scattering (DLS) while assuming the formation of spherical aggregation. Interestingly, a step-terrace structure characteristic to a clean Pt(111) surface is observed in a propanol-rich PFSI solution (0.1 wt % Nafion + 44.45 wt % water + 55.45 wt % 1-propanol) but X-ray photoelectron spectroscopy clearly indicates the existence of fluorocarbon species at the Pt(111) surface, suggesting the formation of a smooth adsorbed layer of PFSIs in a lying down configuration. Absence of any features assignable to aggregates in DLS data suggests well-dispersion of PFSIs in such propanol-rich solution without aggregations. Thus, the adsorbed structure of PFSIs at Pt surfaces can be controlled by tuning the composition of mixed so…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“The morphology, size, and conformation of the ionomer agglomerates dispersed will differ with the water fraction or the type of alcohol, altering the CLs' structure and their performance [25,30,32,49,57,131,137,140].”
From Effect of Catalyst Ink and Formation Process on the Multiscale Structure of Catalyst Layers in PEM Fuel Cells (2022) · cites this paper as [30]
Citations
Cites
Materials for fuel-cell technologies
Steele, B. C. H., & Heinzel, A. (2001) · Nature · doi:10.1038/35104620 · Cited by 7,772
Electrocatalyst approaches and challenges for automotive fuel cells
Debe, M. K. (2012) · Nature · doi:10.1038/nature11115 · Cited by 5,885
Gwyddion: an open-source software for SPM data analysis
Nečas, D., & Klapetek, P. (2012) · Open Physics · doi:10.2478/s11534-011-0096-2 · Cited by 4,454
New Insights into Perfluorinated Sulfonic-Acid Ionomers
Kusoglu, A., & Weber, A. Z. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00159 · Cited by 2,432
Litster, S., & McLean, G. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2003.12.055 · Cited by 1,275
Markovic, N., Gasteiger, H., & Ross, P. N. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837646 · Cited by 564
Technical challenges of working with extracellular vesicles
Ramirez, M. I., Amorim, M. G., Gadelha, C., Milic, I., Welsh, J. A., Freitas, V. M., Nawaz, M., Akbar, N., Couch, Y., Makin, L., et al. (2018) · Nanoscale · doi:10.1039/c7nr08360b · Cited by 516
Wang, J. X., Markovic, N. M., & Adzic, R. R. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp037593v · Cited by 491
Fuel Cell Catalyst Layers: A Polymer Science Perspective
Holdcroft, S. (2014) · Chemistry of Materials · doi:10.1021/cm401445h · Cited by 481
Uchida, M., Aoyama, Y., Eda, N., & Ohta, A. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2048477 · Cited by 408
Three-dimensional analysis of Nafion layers in fuel cell electrodes
Lopez-Haro, M., Guétaz, L., Printemps, T., Morin, A., Escribano, S., Jouneau, P.-H., Bayle-Guillemaud, P., Chandezon, F., & Gebel, G. (2014) · Nature Communications · doi:10.1038/ncomms6229 · Cited by 402
Park, Y.-C., Tokiwa, H., Kakinuma, K., Watanabe, M., & Uchida, M. (2016) · Journal of Power Sources · doi:10.1016/j.jpowsour.2016.02.091 · Cited by 389
New Preparation Method for Polymer‐Electrolyte Fuel Cells
Uchida, M., Aoyama, Y., Eda, N., & Ohta, A. (1995) · Journal of The Electrochemical Society · doi:10.1149/1.2044068 · Cited by 282
Ngo, T. T., Yu, T. L., & Lin, H.-L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.10.055 · Cited by 231
Nafion in dilute solvent systems: Dispersion or solution?
Welch, C., Labouriau, A., Hjelm, R., Orler, B., Johnston, C., & Kim, Y. S. (2012) · ACS Macro Letters · doi:10.1021/mz3005204 · Cited by 211
Shin, S.-J., Lee, J.-K., Ha, H.-Y., Hong, S.-A., Chun, H.-S., & Oh, I.-H. (2002) · Journal of Power Sources · doi:10.1016/s0378-7753(01)01045-x · Cited by 205
Self-Organization in Catalyst Layers of Polymer Electrolyte Fuel Cells
Malek, K., Eikerling, M., Wang, Q., Navessin, T., & Liu, Z. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp072692k · Cited by 200
Diat, O., & Gebel, G. (2008) · Nature Materials · doi:10.1038/nmat2091 · Cited by 178
Microstructure of Catalyst Layers in PEM Fuel Cells Redefined: A Computational Approach
Malek, K., Mashio, T., & Eikerling, M. (2011) · Electrocatalysis · doi:10.1007/s12678-011-0047-0 · Cited by 151
Takahashi, S., Mashio, T., Horibe, N., Akizuki, K., & Ohma, A. (2015) · ChemElectroChem · doi:10.1002/celc.201500131 · Cited by 143
Doo, G., Lee, J. H., Yuk, S., Choi, S., Lee, D.-H., Lee, D. W., Kim, H. G., Kwon, S. H., Lee, S. G., & Kim, H.-T. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01751 · Cited by 126
19F NMR studies of Nafion™ ionomer adsorption on PEMFC catalysts and supporting carbons
MA, S., CHEN, Q., JOGENSEN, F., Stein, P. C., & Skou, E. M. (2007) · Solid State Ionics · doi:10.1016/j.ssi.2007.10.007 · Cited by 120
Tarokh, A., Karan, K., & Ponnurangam, S. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b01663 · Cited by 101
Ngo, T. T., Yu, T. L., & Lin, H.-L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.03.055 · Cited by 92
Fuel cell cathode catalyst layers from “green” catalyst inks
Xie, Z., Zhao, X., Adachi, M., Shi, Z., Mashio, T., Ohma, A., Shinohara, K., Holdcroft, S., & Navessin, T. (2008) · Energy & Environmental Science · doi:10.1039/b808613n · Cited by 86
Resolving the Mystery of Aqueous Solutions of Tertiary Butyl Alcohol
Subramanian, D., & Anisimov, M. A. (2011) · The Journal of Physical Chemistry B · doi:10.1021/jp2041795 · Cited by 85
Molecular Dynamics Study of Ionomer Adsorption at a Carbon Surface in Catalyst Ink
Mashio, T., Ohma, A., & Tokumasu, T. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.04.004 · Cited by 84
Xu, F., Zhang, H., Ilavsky, J., Stanciu, L., Ho, D., Justice, M. J., Petrache, H. I., & Xie, J. (2010) · Langmuir · doi:10.1021/la1028228 · Cited by 82
Dispersion of Rod-like Particles of Nafion in Salt-Free Water/1-Propanol and Water/Ethanol Solutions
Yamaguchi, M., Matsunaga, T., Amemiya, K., Ohira, A., Hasegawa, N., Shinohara, K., Ando, M., & Yoshida, T. (2014) · The Journal of Physical Chemistry B · doi:10.1021/jp506814m · Cited by 81
Takahashi, S., Shimanuki, J., Mashio, T., Ohma, A., Tohma, H., Ishihara, A., Ito, Y., Nishino, Y., & Miyazawa, A. (2016) · Electrochimica Acta · doi:10.1016/j.electacta.2016.12.068 · Cited by 76
Sharma, R., & Andersen, S. M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b14622 · Cited by 73
SANS studies on catalyst ink of fuel cell
Shibayama, M., Matsunaga, T., Kusano, T., Amemiya, K., Kobayashi, N., & Yoshida, T. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.39842 · Cited by 65
Masuda, T., Sonsudin, F., Singh, P. R., Naohara, H., & Uosaki, K. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp404376t · Cited by 65
Self-citationMabuchi, T., Huang, S.-F., & Tokumasu, T. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02725 · Cited by 64
Gupit, C. I., Li, X., Maekawa, R., Hasegawa, N., Iwase, H., Takata, S.-I., & Shibayama, M. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b02314 · Cited by 41
Masuda, T., Ikeda, K., & Uosaki, K. (2013) · Langmuir · doi:10.1021/la304705k · Cited by 39
Self-citationEffect of Freeze−Thawing on Lipid Bilayer-Protected Gold Nanoparticles
Zhang, L., Li, P., Li, D., Guo, S., & Wang, E. (2008) · Langmuir · doi:10.1021/la703737q · Cited by 37
Morphology Changes in Perfluorosulfonated Ionomer from Thickness and Thermal Treatment Conditions
Gao, X. P., Yamamoto, K., Hirai, T., Uchiyama, T., Ohta, N., Takao, N., Matsumoto, M., Imai, H., Sugawara, S., Shinohara, K., et al. (2020) · Langmuir · doi:10.1021/acs.langmuir.9b03564 · Cited by 35
Formation and Structure of Perfluorosulfonated Ionomer Thin Film on a Graphite Surface
Masuda, T., Naohara, H., Takakusagi, S., Singh, P. R., & Uosaki, K. (2009) · Chemistry Letters · doi:10.1246/cl.2009.884 · Cited by 30
Self-citationKishi, M., Tanaka, M., & Mori, T. (2019) · Journal of the Ceramic Society of Japan · doi:10.2109/jcersj2.19152 · Cited by 12
Size and shape of Nafion particles in water after high‐temperature treatment
Yamaguchi, M., Terao, T., Ohira, A., Hasegawa, N., & Shinohara, K. (2019) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.24833 · Cited by 11
CONFORMATION OF NAFION MOLECULES IN DILUTE ISOPROPYL ALCOHOL/WATER MIXTURE SOLUTIONS
Ngo, T. T., & Yu, T. L. (2011) · Cited by 3
Research works printed but not linked: 2
- 10.1149/ma2017-02/34/147710.1149/08008.0577ecst · doi:10.1149/ma2017-02/34/147710.1149/08008.0577ecst
- Abràmoff M. D., 2004, Biophotonics Int., 11, 36
Cited by
Probing Ionomer Interactions with Electrocatalyst Particles in Solution
Berlinger, S. A., McCloskey, B. D., & Weber, A. Z. (2021) · ACS Energy Letters · doi:10.1021/acsenergylett.1c00866 · Cited by 93
Liu, H., Ney, L., Zamel, N., & Li, X. (2022) · Applied Sciences · doi:10.3390/app12083776 · Cited by 85
“The morphology, size, and conformation of the ionomer agglomerates dispersed will differ with the water fraction or the type of alcohol, altering the CLs’ structure and their performance [25,30,32,49,57,131,137,140].”
BackgroundMulticomponent, multiphase interactions in fuel-cell inks
Berlinger, S. A., Garg, S., & Weber, A. Z. (2021) · Current Opinion in Electrochemistry · doi:10.1016/j.coelec.2021.100744 · Cited by 62
Liu, P., Yang, D., Li, B., Zhang, C., & Ming, P. (2023) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2023.02.022 · Cited by 49
Putra, R. P., Matsushita, K., Ohnishi, T., & Masuda, T. (2024) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.3c03012 · Cited by 32
Self-citation
Metadata
- Authors
- Devivaraprasad, R., & Masuda, T.
- Affiliations
- National Institute for Materials Science (JP)
- Corresponding author
- Masuda, Takuya
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-11-11
- Volume
- 36
- Issue
- 46
- Pages
- 13793-13798
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W3104763363
- Cited by
- 11
- References
- 42
- Citations by year
- 2026: 1 · 2025: 2 · 2024: 2 · 2023: 2 · 2022: 2 · 2021: 2
- FWCI
- 0.52
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Langmuir (publishedVersion)
- PubMed (publishedVersion)
- Funders
- New Energy and Industrial Technology Development Organization
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Fuel Cells and Related Materials
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Electrostatics and Colloid Interactions
- Physical Sciences › Chemistry › Physical and Theoretical Chemistry › Surface Chemistry and Catalysis
- Keywords
- perfluorosulfonated ionomer, Nafion, Pt(111), polymer aggregation, 1-propanol, mixed solvents, hydrodynamic radius, step-terrace structure, in situ atomic force microscopy
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.