The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
A Revised Pseudo-Second-Order Kinetic Model for Adsorption, Sensitive to Changes in Adsorbate and Adsorbent Concentrations
Open accessAbstract
Much contemporary research considers the development of novel sorbents for the removal of toxic contaminants. Whilst these studies often include experimental adsorption kinetics, modelling is normally limited to application of the pseudo-second order (PSO) rate equation, which provides no sensitivity towards changes in experimental conditions and thus no predictive capability. We demonstrate a relatively simple modification of the PSO model, with the final form dqt/dt = k’C t (1-(q t /q e ))^2 where k’=k 2 *(q e *^2)/C 0 *. We demonstrate that unlike the PSO model, this new rate equation provides first-order dependence upon initial sorbate concentration (observed experimentally as x̄=0.829±0.417), whilst rate constant k’ is significantly less sensitive to changes in C 0 and C s than PSO rate constant k 2 . We demonstrate that this model improves predictive capacity towards changes in C 0 and C s , particularly when q e is calculated using the Langmuir or Freundlich adsorption isotherm. Finally, we explore how the new rate constant, k’, responds to changes in sorbent morphology, identifying that particle radius is a better constraining parameter than surface area. In this new equation, the conditionality of the rate constant upon experimental conditions is significantly decreased, facilitating better comparison of new results with the literature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pseudo-second order model for sorption processes
Ho, Y. S., & McKay, G. (1999) · Process Biochemistry · doi:10.1016/s0032-9592(98)00112-5 · Cited by 17,497
Review of second-order models for adsorption systems
HO, Y. (2006) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2005.12.043 · Cited by 4,120
Modelling and interpretation of adsorption isotherms
Ayawei, N., Ebelegi, A. N., & Wankasi, D. (2017) · Journal of Chemistry · doi:10.1155/2017/3039817 · Cited by 2,957
The kinetics of sorption of divalent metal ions onto sphagnum moss peat
Ho, Y. (2000) · Water Research · doi:10.1016/s0043-1354(99)00232-8 · Cited by 2,910
Kinetic models of sorption: a theoretical analysis
Azizian, S. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.03.048 · Cited by 2,315
Simonin, J.-P. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.04.079 · Cited by 2,100
Critical review in adsorption kinetic models
Qiu, H., Lv, L., Pan, B.-C., Zhang, Q.-J., Zhang, W.-M., & Zhang, Q.-X. (2009) · Journal of Zhejiang University-SCIENCE A · doi:10.1631/jzus.a0820524 · Cited by 1,776
Removal of heavy metals from waters by means of natural zeolites
Blanchard, G., Maunaye, M., & Martin, G. (1984) · Water Research · doi:10.1016/0043-1354(84)90124-6 · Cited by 1,699
Largitte, L., & Pasquier, R. (2016) · Chemical Engineering Research and Design · doi:10.1016/j.cherd.2016.02.006 · Cited by 1,148
Kinetics and thermodynamic study of phosphate adsorption on iron hydroxide-eggshell waste
Mezenner, N. Y., & Bensmaili, A. (2009) · Chemical Engineering Journal · doi:10.1016/j.cej.2008.06.024 · Cited by 492
From Langmuir Kinetics to First- and Second-Order Rate Equations for Adsorption
Liu, Y., & Shen, L. (2008) · Langmuir · doi:10.1021/la801839b · Cited by 399
Plazinski, W., Dziuba, J., & Rudzinski, W. (2013) · Adsorption · doi:10.1007/s10450-013-9529-0 · Cited by 317
Xiao, Y., Azaiez, J., & Hill, J. M. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04724 · Cited by 194
Marczewski, A. W. (2010) · Langmuir · doi:10.1021/la1010049 · Cited by 187
Application of branched pore diffusion model in the adsorption of reactive dyes on activated carbon
Yang, X., & Al‐Duri, B. (2001) · Chemical Engineering Journal · doi:10.1016/s1385-8947(00)00233-3 · Cited by 180
Adsorption technique for the treatment of As(V)-rich effluents
Singh, D. B., Prasad, G., & Rupainwar, D. C. (1996) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/0927-7757(95)03468-4 · Cited by 163
Lazaridis, N. K., Pandi, T. A., & Matis, K. A. (2004) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030735n · Cited by 152
One-Pot Synthesis of LDH/GO Composites as Highly Effective Adsorbents for Decontamination of U(VI)
Linghu, W., Yang, H. J., Sun, Y., et al. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b01303 · Cited by 139
Zhan, W., Xu, C., Qian, G., Huang, G., Tang, X., & Lin, B. (2018) · RSC Advances · doi:10.1039/c8ra02055h · Cited by 134
Örnek, A., Özacar, M., & Şengil, İ. A. (2007) · Biochemical Engineering Journal · doi:10.1016/j.bej.2007.04.011 · Cited by 126
Adsorption of Cr( vi ) onto a magnetic CoFe 2 O 4 /MgAl-LDH composite and mechanism study
Deng, L., Shi, Z., & Peng, X. (2015) · RSC Advances · doi:10.1039/c5ra06178d · Cited by 123
Boddu, V. M., Abburi, K., Randolph, A. J., & Smith, E. D. (2008) · Separation Science and Technology · doi:10.1080/01496390801940762 · Cited by 102
Shipley, H. J., Engates, K. E., & Grover, V. A. (2012) · Environmental Science and Pollution Research · doi:10.1007/s11356-012-0984-z · Cited by 101
On the Choice of Batch or Fixed Bed Adsorption Processes for Wastewater Treatment
Dichiara, A. B., Weinstein, S. J., & Rogers, R. E. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b02350 · Cited by 95
Removal of Arsenic from Groundwater using Crystalline Hydrous Ferric Oxide (CHFO)
Manna, B., Dey, S., Debnath, S., & Ghosh, U. C. (2003) · Water Quality Research Journal · doi:10.2166/wqrj.2003.013 · Cited by 88
Evaluation of parameter uncertainties in nonlinear regression using Microsoft Excel Spreadsheet
Hu, W., Xie, J., Chau, H. W., & Si, B. (2015) · ENVIRONMENTAL SYSTEMS RESEARCH · doi:10.1186/s40068-015-0031-4 · Cited by 78
Chi, S., Ji, C., Sun, S., Jiang, H., Qu, R., & Sun, C. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b02178 · Cited by 56
Use and Misuse of Sorption Kinetic Data: A Common Mistake That Should Be Avoided
Canzano, S., Iovino, P., Leone, V., Salvestrini, S., & Capasso, S. (2012) · Adsorption Science & Technology · doi:10.1260/0263-6174.30.3.217 · Cited by 51
Ai, T., Jiang, X., Liu, Q., Lv, L., & Dai, S. (2020) · RSC Advances · doi:10.1039/d0ra02346a · Cited by 40
Effects of Cu(II) on the Adsorption Behaviors of Cr(III) and Cr(VI) onto Kaolin
Liu, J., Wu, X., Hu, Y., Dai, C., Peng, Q., & Liang, D. (2016) · Journal of Chemistry · doi:10.1155/2016/3069754 · Cited by 39
Adsorption of Congo red with hydrothermal treated shiitake mushroom
Yang, K., Li, Y., Zheng, H., Luan, X., Li, H., Wang, Y., Du, Q., Sui, K., Li, H., & Xia, Y. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab5ff3 · Cited by 33
Yang, H., Yu, H., Fang, J., Sun, J., Xia, J., Xie, W., Wei, S., Cui, Q., Sun, C., & Wu, T. (2019) · ACS Omega · doi:10.1021/acsomega.9b02347 · Cited by 19
Physical Chemistry (Atkins, P. W.)
Carpenter, D. K. (1979) · Journal of Chemical Education · doi:10.1021/ed056pa260.1 · Cited by 16
Kirby, M. E., Bullen, J. C., Hanif, M., Heiba, H. F., Liu, F., Northover, G. H. R., Resongles, E., & Weiss, D. J. (2019) · Journal of Chemical Education · doi:10.1021/acs.jchemed.8b01036 · Cited by 15
Self-citationModel fitting of sorption kinetics data: Misapplications overlooked and their rectifications
Huang, Y., Farooq, M. U., Lai, S., Feng, X., Sampranpiboon, P., Wang, X., & Huang, W. H. (2017) · AIChE Journal · doi:10.1002/aic.16051 · Cited by 13
Cited by
Raji, Z., Karim, A., Karam, A., & Khalloufi, S. (2023) · Waste · doi:10.3390/waste1030046 · Cited by 517
PFAS removal by ion exchange resins: A review
Dixit, F., Dutta, R., Barbeau, B., Berube, P., & Mohseni, M. (2021) · Chemosphere · doi:10.1016/j.chemosphere.2021.129777 · Cited by 438
Metadata
- Authors
- Bullen, J. C., Saleesongsom, S., Gallagher, K., & Weiss, D. J.
- Venue
- Langmuir
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-03-04
- Volume
- 37
- Issue
- 10
- Pages
- 3189-3201
- ISSN
- 0743-7463 (ISSN-L)
- 1520-5827
- OpenAlex
- W3134287479
- Cited by
- 269
- References
- 35
- FWCI
- 7.46
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.