Synthesis and Characterization of Well-Defined High-Molecular-Weight PDLA-b-PLLA and PDLA-b-PLLA-b-PDLA Stereo-Block Copolymers
Open accessThe DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
Abstract
High Resolution Image Download MS PowerPoint Slide A facile method is developed to synthesize poly(lactide) (PLA) stereo-diblock and stereo-triblock copolymers using a bismuth catalyst. The judicious choice of the catalytic system allows us to synthesize the PLA stereocomplex having a molar mass exceeding 450 kg/mol and a polydispersity of below 2. The synthesis of such a high molar mass became feasible because in the chosen catalytic system, unlike in the reported synthesis routes, the presence of water in traces does not promote chain transfer. The observations are that during polymerization, single crystals of poly( l -lactide)- b -poly( d -lactide) (PLLA- b -PDLA) and poly( d -lactide)- b -poly( l -lactide)- b -poly( d -lactide) (PDLA- b -PLLA- b -PDLA) stereo-block copolymers are formed. These platelet-like single crystals tend to aggregate, forming a globular spherical morphology equivalent to that perceived on the crystallization of the stereocomplex from solution. The adopted synthesis route provides molecular mixing of the stereo-regular PLA chains in the absence of any detectable traces of homo-crystals, which are unavoidable when the mixing is performed using a homopolymer dissolution route. The molecularly mixed stereo-regular PLAs in a polymer melt retain their molecular interaction, even after isothermal crystallization or rheological studies that follow the anticipated viscoelastic response of a polymer melt. The increasing molar masses of the PLLA/PDLA diblock and triblock copolymers show an increase in the tensile modulus and elongation to break, retrospectively indicating the brittle to ductile transformation of the polymer with increasing molar mass. Thermal and imaging experimental methods such as differential scanning calorimetry, nuclear magnetic resonance, thermogravimetric analysis, scanning electron microscopy, electron diffraction, wide-angle X-ray diffraction, Raman spectroscopy, and Fourier transform infrared spectroscopy are employed to follow the enthalpic relaxation, conformational, and structural changes.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Third-Generation Biomedical Materials
Hench, L. L., & Polak, J. M. (2002) · Science · doi:10.1126/science.1067404 · Cited by 2,789
An overview of the recent developments in polylactide (PLA) research
Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Stereocomplex formation between enantiomeric poly(lactides)
Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409
Poly(lactide) Stereocomplexes: Formation, Structure, Properties, Degradation, and Applications
Tsuji, H. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200500062 · Cited by 1,366
Polylactide (PLA)-based nanocomposites
Raquez, J.-M., Habibi, Y., Murariu, M., & Dubois, P. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.014 · Cited by 1,209
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Kister, G., Cassanas, G., & Vert, M. (1998) · Polymer · doi:10.1016/s0032-3861(97)00229-2 · Cited by 689
Poly(lactic acid) stereocomplexes: A decade of progress
Tsuji, H. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.017 · Cited by 535
Synthesis of Poly(Lactic Acid): A Review
Mehta, R., Kumar, V., Bhunia, H., & Upadhyay, S. N. (2005) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1080/15321790500304148 · Cited by 510
Polylactic acid (PLA): Research, development and industrialization
Pang, X., Zhuang, X., Tang, Z., & Chen, X. (2010) · Biotechnology Journal · doi:10.1002/biot.201000135 · Cited by 435
Stereocomplex formation between enantiomeric poly(lactic acids). 9. Stereocomplexation from the melt
Tsuji, H., & Ikada, Y. (1993) · Macromolecules · doi:10.1021/ma00077a032 · Cited by 410
Wei, X.-F., Bao, R.-Y., Cao, Z.-Q., Yang, W., Xie, B.-H., & Yang, M.-B. (2014) · Macromolecules · doi:10.1021/ma402653a · Cited by 324
Enhanced thermal stability of poly(lactide)s in the melt by enantiomeric polymer blending
Tsuji, H., & Fukui, I. (2003) · Polymer · doi:10.1016/s0032-3861(03)00175-7 · Cited by 275
Stereoselective Crystallization and Specific Interactions in Polylactides
Sarasua, J.-R., Rodríguez, N. L., Arraiza, A. L., & Meaurio, E. (2005) · Macromolecules · doi:10.1021/ma051266z · Cited by 252
Tan, B. H., Muiruri, J. K., Li, Z., & He, C. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b01713 · Cited by 247
Pan, P., Han, L., Bao, J., Xie, Q., Shan, G., & Bao, Y. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b03546 · Cited by 231
Recent Advances in Processing of Stereocomplex‐Type Polylactide
Bai, H., Deng, S., Bai, D., Zhang, Q., & Fu, Q. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700454 · Cited by 201
The Biocompatibility Manifesto: Biocompatibility for the Twenty-first Century
Ratner, B. D. (2011) · Journal of Cardiovascular Translational Research · doi:10.1007/s12265-011-9287-x · Cited by 185
Biocompatibility of Resorbable Polymers: A Historical Perspective and Framework for the Future
Pappalardo, D., Mathisen, T., & Finne-Wistrand, A. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.9b00159 · Cited by 177
Synthesis and Characterization of Poly(l-lactide)−Poly(ε-caprolactone) Multiblock Copolymers
Jeon, O., Lee, S.-H., Kim, S. H., Lee, Y. M., & Kim, Y. H. (2003) · Macromolecules · doi:10.1021/ma034006v · Cited by 168
Stereoblock Polylactides as High-Performance Bio-Based Polymers
Kakuta, M., Hirata, M., & Kimura, Y. (2009) · Polymer Reviews · doi:10.1080/15583720902834825 · Cited by 166
Tsuji, H., Hyon, S. H., & Ikada, Y. (1992) · Macromolecules · doi:10.1021/ma00037a024 · Cited by 151
Stereo block copolymers of L‐ and D‐lactides
Yui, N., Dijkstra, P. J., & Feijen, J. (1990) · Die Makromolekulare Chemie · doi:10.1002/macp.1990.021910303 · Cited by 151
Fukushima, K., Furuhashi, Y., Sogo, K., Miura, S., & Kimura, Y. (2005) · Macromolecular Bioscience · doi:10.1002/mabi.200400121 · Cited by 115
Pan, P., Bao, J., Han, L., Xie, Q. M., Shan, G., & Bao, Y. (2016) · Polymer · doi:10.1016/j.polymer.2016.06.014 · Cited by 111
Comprehensive Understanding of Polyester Stereocomplexation
Wan, Z., Longo, J. M., Liang, L., Chen, H.-Y., Hou, G., Yang, S., Zhang, W., Coates, G. W., & Lu, X. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b07058 · Cited by 102
Fukushima, K., Hirata, M., & Kimura, Y. (2007) · Macromolecules · doi:10.1021/ma070156k · Cited by 100
Xu, T., Yang, G., Liu, C., & Lu, X. (2017) · Macromolecules · doi:10.1021/acs.macromol.6b02439 · Cited by 100
Tailor-Made Stereoblock Copolymers of Poly(lactic acid) by a Truly Living Polymerization Catalyst
Rosen, T., Goldberg, I., Venditto, V., & Kol, M. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b07287 · Cited by 87
Crystal Structure and Morphology of Poly( l -lactide-b- d -lactide) Diblock Copolymers
Li, L., Zhong, Z., de Jeu, W. H., Dijkstra, P. J., & Feijén, J. (2004) · Macromolecules · doi:10.1021/ma049077o · Cited by 76
Hirata, M., Kobayashi, K., & Kimura, Y. (2010) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23827 · Cited by 73
Stereocomplexed PLA nanocomposites: From in situ polymerization to materials properties
Re, G. L., Benali, S., Habibi, Y., Raquez, J., & Dúbois, P. (2014) · European Polymer Journal · doi:10.1016/j.eurpolymj.2014.03.004 · Cited by 67
Han, L., Xie, Q., Bao, J., Shan, G., Bao, Y., & Pan, P. (2017) · Polymer Chemistry · doi:10.1039/c6py01989g · Cited by 64
Gupta, A., Pal, A. K., Woo, E. M., & Katiyar, V. (2018) · Scientific Reports · doi:10.1038/s41598-018-22281-1 · Cited by 64
Bandelli, D., Alex, J., Weber, C., & Schubert, U. S. (2019) · Macromolecular Rapid Communications · doi:10.1002/marc.201900560 · Cited by 64
Bao, J., Chang, R., Shan, G., Bao, Y., & Pan, P. (2016) · Crystal Growth & Design · doi:10.1021/acs.cgd.5b01627 · Cited by 62
Bao, J., Xue, X., Li, K., Chang, X., Xie, Q. M., Yu, C., & Pan, P. (2017) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.7b03287 · Cited by 62
Masutani, K., Lee, C. W., & Kimura, Y. (2012) · Polymer · doi:10.1016/j.polymer.2012.10.051 · Cited by 54
Masutani, K., Kawabata, S., Aoki, T., & Kimura, Y. (2010) · Polymer International · doi:10.1002/pi.2945 · Cited by 49
Bao, J., Chang, X., Shan, G., Bao, Y., & Pan, P. (2016) · Polymer Chemistry · doi:10.1039/c6py00976j · Cited by 45
Rahaman, M. H., & Tsuji, H. (2012) · Macromolecular Reaction Engineering · doi:10.1002/mren.201200032 · Cited by 44
Masutani, K., Lee, C. W., & Kimura, Y. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201100683 · Cited by 42
Srinivas, V., van Hooy‐Corstjens, C. S. J., Rastogi, S., & Harings, J. (2020) · Polymer · doi:10.1016/j.polymer.2020.122637 · Cited by 32
Self-citationBlock–Stereoblock Copolymers of Poly(ϵ‐Caprolactone) and Poly(Lactic Acid)
Rosen, T., Goldberg, I., Navarra, W., Venditto, V., & Kol, M. (2018) · Angewandte Chemie · doi:10.1002/ange.201803063 · Cited by 26
Tsuji, H., Tamai, K., Kimura, T., Kubota, A., Tahahashi, A., Kuzuya, A., & Ohya, Y. (2016) · Polymer · doi:10.1016/j.polymer.2016.04.049 · Cited by 18
Determination of Polylactide Microstructure by Homonuclear Decoupled 1H NMR Spectroscopy
Roy, S. S., Sarkar, S., & Chakraborty, D. (2021) · The Chemical Record · doi:10.1002/tcr.202100073 · Cited by 17
Easy access to ultra-high molecular weight polylactones using a bismuth catalyst
Li, F., Rastogi, S., & Romano, D. (2022) · Journal of Catalysis · doi:10.1016/j.jcat.2022.09.015 · Cited by 14
Self-citationSrinivas, V., Bertella, F., van Hooy‐Corstjens, C. S. J., van Leeuwen, B., Craenmehr, E. G. M., Cavallo, D., Rastogi, S., & Harings, J. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101665 · Cited by 6
Self-citation
Research works printed but not linked: 1
- 10.1021/sc500464c/asset/images/sc500464c.social.jpeg_v03 · doi:10.1021/sc500464c/asset/images/sc500464c.social.jpeg_v03
Cited by
Poly(lactic acid) stereocomplexes based molecular architectures: Synthesis and crystallization
Michell, R. M., Ladelta, V., Da Silva, E., Müller, A. J., & Hadjichristidis, N. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101742 · Cited by 77
Wang, H., Xu, L., Chen, X., & Ullah, A. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.112795 · Cited by 17
Cao, J., Li, W., Huang, Y., Jiang, L., & Dan, Y. (2023) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.3c03003 · Cited by 12
Arokiyasamy, D. A., & Tamilperuvalathan, S. (2026) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2026.150358 · Cited by 9
Puthiyaveettil, M. T., Raman, S. K., Zhao, J., & Rastogi, S. (2024) · Macromolecules · doi:10.1021/acs.macromol.4c01366 · Cited by 9
Self-citation
Metadata
- Authors
- Li, F., Zhou, F., Romano, D., & Rastogi, S.
- Affiliations
- King Abdullah University of Science and Technology (SA)
- Corresponding author
- Romano, Dario
- Rastogi, Sanjay
- Venue
- Macromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2023-02-20
- Volume
- 56
- Issue
- 5
- Pages
- 1995-2008
- ISSN
- 0024-9297 (ISSN-L)
- 1520-5835
- OpenAlex
- W4321367726
- Cited by
- 21
- References
- 51
- Citations by year
- 2026: 5 · 2025: 9 · 2024: 4 · 2023: 3
- FWCI
- 1.35
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Licence
- Locations
- Macromolecules (publishedVersion, cc-by)
- King Abdullah University of Science and Technology Repository (King Abdullah University of Science and Technology) (submittedVersion, cc-by)
- Funders
- King Abdullah University of Science and Technology
- China Scholarship Council (CSC201806440033)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Materials Chemistry › Block Copolymer Self-Assembly
- Keywords
- poly(L-lactic acid), poly(D-lactide), stereocomplex, bismuth catalysts, ring-opening polymerization, high molecular weight, single crystals, molecular mixing, crystallization, viscoelasticity, tensile properties, molar mass effects, polymer morphology
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.