The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
Abstract
Three dimensional printing (3D printing) was used to fabricate novel oral drug delivery devices with specialized design configurations. Each device was loaded with multiple actives, with the intent of applying this process to the production of personalized medicines tailored at the point of dispensing or use. A filament extruder was used to obtain drug-loaded--paracetamol (acetaminophen) or caffeine--filaments of poly(vinyl alcohol) with characteristics suitable for use in fused-deposition modeling 3D printing. A multinozzle 3D printer enabled fabrication of capsule-shaped solid devices containing the drug with different internal structures. The design configurations included a multilayer device, with each layer containing drug, whose identity was different to the drug in the adjacent layers, and a two-compartment device comprising a caplet embedded within a larger caplet (DuoCaplet), with each compartment containing a different drug. Raman spectroscopy was used to collect 2-dimensional hyper spectral arrays across the entire surface of the devices. Processing of the arrays using direct classical least-squares component matching to produce false color representations of distribution of the drugs was used. This clearly showed a definitive separation between the drug layers of paracetamol and caffeine. Drug release tests in biorelevant bicarbonate media showed unique drug release profiles dependent on the macrostructure of the devices. In the case of the multilayer devices, release of both paracetamol and caffeine was simultaneous and independent of drug solubility. With the DuoCaplet design, it was possible to engineer either rapid drug release or delayed release by selecting the site of incorporation of the drug in the device; the lag-time for release from the internal compartment was dependent on the characteristics of the external layer. The study confirms the potential of 3D printing to fabricate multiple-drug containing devices with specialized design configurations and unique drug release characteristics, which would not otherwise be possible using conventional manufacturing methods.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H., & McAlpine, M. C. (2013) · Nano Letters · doi:10.1021/nl4007744 · Cited by 874
Pharmaceutical Applications of Hot-Melt Extrusion: Part I
Crowley, M. M., Zhang, F., Repka, M. A., Thumma, S., Upadhye, S. B., Kumar Battu, S., McGinity, J. W., & Martin, C. (2007) · Drug Development and Industrial Pharmacy · doi:10.1080/03639040701498759 · Cited by 824
Effect of geometry on drug release from 3D printed tablets
Goyanes, A., Robles Martinez, P., Buanz, A., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.04.069 · Cited by 667
Self-citationFused-filament 3D printing (3DP) for fabrication of tablets
Goyanes, A., Buanz, A. B. M., Basit, A. W., & Gaisford, S. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.09.044 · Cited by 587
Self-citationHandbook of Aqueous Solubility Data
Yalkowsky, S. H. (2003) · CRC Press eBooks · doi:10.1201/9780203490396 · Cited by 585
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Goyanes, A., Buanz, A. B. M., Hatton, G. B., Gaisford, S., & Basit, A. W. (2015) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2014.12.003 · Cited by 570
Self-citationSkowyra, J., Pietrzak, K., & Alhnan, M. A. (2015) · European Journal of Pharmaceutical Sciences · doi:10.1016/j.ejps.2014.11.009 · Cited by 530
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Khaled, S. A., Burley, J. C., Alexander, M. R., & Roberts, C. J. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.021 · Cited by 511
Personalised dosing: Printing a dose of one’s own medicine
Alomari, M., Mohamed, F. H., Basit, A. W., & Gaisford, S. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2014.12.006 · Cited by 257
Self-citationScience in three dimensions: The print revolution
Jones, N. (2012) · Nature · doi:10.1038/487022a · Cited by 249
Does sex matter? The influence of gender on gastrointestinal physiology and drug delivery
Freire, A. C., Basit, A. W., Choudhary, R., Piong, C. W., & Merchant, H. A. (2011) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2011.04.069 · Cited by 190
Self-citationCaffeine as an analgesic adjuvant for acute pain in adults
Derry, C. J., Derry, S., & Moore, R. A. (2014) · Cochrane Database of Systematic Reviews · doi:10.1002/14651858.cd009281.pub3 · Cited by 188
Towards fabrication of 3D printed medical devices to prevent biofilm formation
Sandler, N., Salmela, I., Fallarero, A., Rosling, A., Khajeheian, M., Kolakovic, R., Genina, N., Nyman, J., & Vuorela, P. (2014) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.11.001 · Cited by 184
3-dimensional (3D) fabricated polymer based drug delivery systems
Moulton, S. E., & Wallace, G. G. (2014) · Journal of Controlled Release · doi:10.1016/j.jconrel.2014.07.005 · Cited by 156
Review of bilayer tablet technology
Abebe, A., Akseli, I., Sprockel, O. L., Kottala, N., & Cuitiño, A. M. (2013) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2013.12.028 · Cited by 130
Real-time assessment of critical quality attributes of a continuous granulation process
Fonteyne, M., Vercruysse, J., Córdoba-Díaz, D., Gildemyn, D., Vervaet, C., Remon, J. P., & Beer, T. D. (2011) · Pharmaceutical Development and Technology · doi:10.3109/10837450.2011.627869 · Cited by 127
Liu, F., Merchant, H. A., Kulkarni, R. P., Alkademi, M., & Basit, A. W. (2011) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2011.01.001 · Cited by 124
Self-citationFadda, H. M., Merchant, H. A., Arafat, B. T., & Basit, A. W. (2009) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2009.08.003 · Cited by 123
Self-citationGoyanes, Á., Hatton, G. B., Merchant, H. A., & Basit, A. W. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.02.051 · Cited by 97
Self-citationGoyanes, Á., Hatton, G. B., & Basit, A. W. (2015) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2014.12.002 · Cited by 27
Self-citation
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
A new chapter in pharmaceutical manufacturing: 3D-printed drug products
Norman, J., Madurawe, R. D., Moore, C. M. V., Khan, M. A., & Khairuzzaman, A. (2017) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.03.001 · Cited by 810
3D Printing in Pharmaceutical and Medical Applications – Recent Achievements and Challenges
Jamróz, W., Szafraniec, J., Kurek, M., & Jachowicz, R. (2018) · Pharmaceutical Research · doi:10.1007/s11095-018-2454-x · Cited by 707
Metadata
- Authors
- Goyanes, A., Wang, J., Buanz, A., Martínez-Pacheco, R., Telford, R., Gaisford, S., & Basit, A. W.
- Venue
- Molecular Pharmaceutics
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-10-16
- Volume
- 12
- Issue
- 11
- Pages
- 4077-4084
- ISSN
- 1543-8384 (ISSN-L)
- 1543-8392
- OpenAlex
- W2411353178
- Cited by
- 511
- References
- 21
- FWCI
- 51.22
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.